sup guys, new to the site
#1
Registered User
Thread Starter
Join Date: Aug 2008
Location: Illinois
Posts: 91
Likes: 0
Received 0 Likes
on
0 Posts
sup guys, new to the site
i just got a black 2005 RX-8 and came here to get the scoop on stuff. Its pretty much a daily driver. i also have a 2002 corvette with a 416 LS3 as well.
My first question is.......the oil light has come on...how low is the oil at that point? how much should I put in? I know when it comes on in the vette its about 1 quart low...answers?
My first question is.......the oil light has come on...how low is the oil at that point? how much should I put in? I know when it comes on in the vette its about 1 quart low...answers?
#4
I <3 Sushi
iTrader: (21)
One more thing, the RX-8 consumes oil. You'll be down about a quart of oil approximately every 3,000 miles. The light should go on by then, this is the reason why to always check on your oil level for the 8. I usually top it off every 1,000 miles and change the oil at every 3,000 miles.
#12
Rotary Powered Countryboy
illinois i would use 5w30 in the summer and 5w20 in the winter (if your gonna drive it in the winter personally i would not i know how shitty it gets in the snow) so buy a beater....but if you do drive it 5w20 will help the warm up time
#13
Registered User
Thread Starter
Join Date: Aug 2008
Location: Illinois
Posts: 91
Likes: 0
Received 0 Likes
on
0 Posts
#14
Registered User
Thread Starter
Join Date: Aug 2008
Location: Illinois
Posts: 91
Likes: 0
Received 0 Likes
on
0 Posts
#15
I <3 Sushi
iTrader: (21)
Here you go:
If you need more information on oil capacity, go here: https://www.rx8club.com/series-i-do-yourself-forum-73/diy-max-oil-out-oil-change-90879/
here is how you do it....
after removing the oil filter
1 jack up the exhaust manifold side of the motor (pass side in usa)
2 take out drain plug, let drain till just a trickle comes out.
3 let down the car, jack up the other side.
4 let drain till complete..
5 install drain plug. drop car back to ground.
6 install oil filter.
put 5 qts of oil in car. start car let run for a bit... but dont flood it...
check oil level..... fill as necessary...
i put in over 6 qts when i made this fortunate error...
hope this helps.
beers
after removing the oil filter
1 jack up the exhaust manifold side of the motor (pass side in usa)
2 take out drain plug, let drain till just a trickle comes out.
3 let down the car, jack up the other side.
4 let drain till complete..
5 install drain plug. drop car back to ground.
6 install oil filter.
put 5 qts of oil in car. start car let run for a bit... but dont flood it...
check oil level..... fill as necessary...
i put in over 6 qts when i made this fortunate error...
hope this helps.
beers
#16
Registered User
Thread Starter
Join Date: Aug 2008
Location: Illinois
Posts: 91
Likes: 0
Received 0 Likes
on
0 Posts
Here you go:
If you need more information on oil capacity, go here: https://www.rx8club.com/showthread.php?t=90879
If you need more information on oil capacity, go here: https://www.rx8club.com/showthread.php?t=90879
#17
It's a Cavalier
#25
Finally Boosted!!!!!!!
Hi Carter! I was wondering if you would make your way over here sometime. Let me know if you have any other questions.
Guys - Vglnte has one very bad *** Vette but he is new to the rotary.
Guys - Vglnte has one very bad *** Vette but he is new to the rotary.