Rotary engines are the best
#1
Rotary engines are the best
SO A FEW WEEKS AGO MY MAZDA WAS HAVING COMPRESSION ISSUES AND I TOOK IT TO A CANADIAN DEALER AND SAID IT NEEDED A NEW ENGINE DUE TO LOW COMPRESSION RESULTS. IT WAS TAKING ATLEAST 2/3 CRANKS TO START.
A WEEK LATER I TOOK IT FOR A LONG RUN TO THE STATES B/C THE WARRANTY WAS GOOD IN THE USA AND WHEN TESTED OUT AT THE DEALER THE COMPRESSION WAS EXCELLENT AND SINCE THEN IT HAS BEEN WORKING LIKE A CHARM!
I ALSO LEARNED BEFORE SHUTTING THE CAR DOWN AND REVING IT UP TO ATLEAST 6-7000 RPM AND LETTING IT IDLE WORKS REALLY WELL. NOW IT ONLY TAKES ONE CRANK TO START
ROTARRY ENGINESS RULLEE :D :w iggle:
A WEEK LATER I TOOK IT FOR A LONG RUN TO THE STATES B/C THE WARRANTY WAS GOOD IN THE USA AND WHEN TESTED OUT AT THE DEALER THE COMPRESSION WAS EXCELLENT AND SINCE THEN IT HAS BEEN WORKING LIKE A CHARM!
I ALSO LEARNED BEFORE SHUTTING THE CAR DOWN AND REVING IT UP TO ATLEAST 6-7000 RPM AND LETTING IT IDLE WORKS REALLY WELL. NOW IT ONLY TAKES ONE CRANK TO START
ROTARRY ENGINESS RULLEE :D :w iggle:
#6
Registered User
Join Date: Mar 2010
Location: Latitude: 37°48′49″S Longitude: 144°57′47″E
Posts: 25
Likes: 0
Received 1 Like
on
1 Post
Exactly - drive em hard, and sometimes rev them to the limiter to clean up all the gunk and they'll be fine. Rotary is a race engine - babysitting them and taking it easy will destroy them.
#7
Registered
Join Date: Jan 2004
Location: Milwaukee Wi.
Posts: 997
Likes: 0
Received 0 Likes
on
0 Posts
I noticed long trips are good for my car and clean out the engine. It always runs better at the end of the trip. that's probably what happened with your car while traveling to the US. I'm guessing carbon buildup probably caused the low compression.
#8
Thankss everyone for the comments :D i was just wandering has anyone done an ipod integrtation to their rx8s? i have a 2005 and was wandering if its possible to get it done by mazda??
#9
RobotsToRobots.com
Join Date: Jan 2010
Location: South Florida
Posts: 455
Likes: 0
Received 0 Likes
on
0 Posts
so a few weeks ago my mazda was having compression issues and i took it to a canadian dealer and said it needed a new engine due to low compression results. It was taking atleast 2/3 cranks to start.
A week later i took it for a long run to the states b/c the warranty was good in the usa and when tested out at the dealer the compression was excellent and since then it has been working like a charm!
I also learned before shutting the car down and reving it up to atleast 6-7000 rpm and letting it idle works really well. Now it only takes one crank to start
rotarry enginess rullee :d :w iggle:
A week later i took it for a long run to the states b/c the warranty was good in the usa and when tested out at the dealer the compression was excellent and since then it has been working like a charm!
I also learned before shutting the car down and reving it up to atleast 6-7000 rpm and letting it idle works really well. Now it only takes one crank to start
rotarry enginess rullee :d :w iggle:
Thread
Thread Starter
Forum
Replies
Last Post
Sifu
RX-8 Parts For Sale/Wanted
3
08-30-2015 10:51 PM