Notices
New Member Forum A place for new members to get their feet wet

Oil Light Question

Thread Tools
 
Search this Thread
 
Rate Thread
 
Old 06-13-2015, 04:52 PM
  #1  
Registered
Thread Starter
 
Koronakesh's Avatar
 
Join Date: Dec 2012
Location: Austin, TX
Posts: 22
Likes: 0
Received 0 Likes on 0 Posts
Oil Light Question

I've searched around and found the oil capacity but have always wondered, at what level is the oil light set to turn on (2005 automatic)? And how much from that point to full?
Old 07-03-2015, 04:55 AM
  #2  
Registered
 
w_hari's Avatar
 
Join Date: Sep 2009
Location: Austria
Posts: 16
Received 5 Likes on 3 Posts
Most of the time at the lowest mark on your dipstick - so about 1 quart or litre...

Another question, since there are multiple references in the forum:
Is the oil level light in any way connected to the oil pressure sensor or is it just a level light?
Old 07-03-2015, 11:37 PM
  #3  
Registered
 
youllberad's Avatar
 
Join Date: May 2015
Posts: 53
Likes: 0
Received 0 Likes on 0 Posts
Oil pressure I believe is only determined by the pressure gauge. If you are having low oil pressure and a light you may want to check some of the hoses?
Personally I wouldn't drive my car with low oil pressure.

When my light comes on I pull over right away and fill it up. Seems to usually just take shy of 1qt to get to the full line on the dipstick. But I usually just add the little bit left over as I have the vacuum line in the Omp capped for more oil consumption. Eats it up rather quickly.
Old 07-03-2015, 11:54 PM
  #4  
Driving my unreliable rx8
 
logalinipoo's Avatar
 
Join Date: Oct 2012
Location: Alvarado, Tx
Posts: 2,051
Received 5 Likes on 5 Posts
The oil pressure is not a sensor it is a low pressure switch. If you aren't showing oil pressure then you likely have no oil pressure at all.

Mine is the same. oil light comes on at the low mark and takes 1 quart to reach the full mark.

Holy crap you capped that vac line completely. How much oil do you use?
Old 07-04-2015, 07:48 AM
  #5  
Registered
 
youllberad's Avatar
 
Join Date: May 2015
Posts: 53
Likes: 0
Received 0 Likes on 0 Posts
A lot! I plan on undoing it probably today, the system was clogged, I can't seem to find those vacuum restictors anywhere I guess I'll just fabricate my own. Maybe the machine shop on base is bored and needs something to do. Smells yummy though 😂
Old 07-04-2015, 12:24 PM
  #6  
Driving my unreliable rx8
 
logalinipoo's Avatar
 
Join Date: Oct 2012
Location: Alvarado, Tx
Posts: 2,051
Received 5 Likes on 5 Posts
probably smokes like all hell at idle. The biggest problem with capping or a restriction. Is it will give more oil when the load is low and vacuum is high. What you need is the opposite of that. More oil when load is high.
Old 07-04-2015, 02:08 PM
  #7  
Registered
 
youllberad's Avatar
 
Join Date: May 2015
Posts: 53
Likes: 0
Received 0 Likes on 0 Posts
I undid it with the spark plug change today, and yes it did smoke a lot at idle and deceleration. On the plus side the lines are clear now 😁
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
05TR1CH
New Member Forum
14
04-18-2023 04:56 AM
Skyl3r
New Member Forum
148
12-02-2019 04:51 PM
mr. GrandGame
New Member Forum
5
03-23-2016 10:16 AM
akagc
RX-8's For Sale/Wanted
7
08-11-2015 07:07 PM
MolecularConcept
New Member Forum
15
08-05-2015 04:43 PM



You have already rated this thread Rating: Thread Rating: 0 votes,  average.

Quick Reply: Oil Light Question



All times are GMT -5. The time now is 06:28 PM.