Looking to Replace my Motor
04-29-2016, 07:51 PM
#1
New Member
Thread Starter
Join Date: Apr 2016
Location: Hilo, Hawaii
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
Looking to Replace my Motor
Hello everyone. Please help. My motor has given out on me (no compression, dealer says i need a new motor). I'm looking online to buy a used motor. Any suggestions on where to look? I've been on ebay and there are used JDM motors that might need some modifications? I have 2004 Manual transmission.
04-29-2016, 08:30 PM
#3
FULLY SEMI AUTOMATIC
iTrader: (9)
location? did you get a comp test?
mazmart or rotary ressuriction might be able to help
mazmart or rotary ressuriction might be able to help
04-29-2016, 08:31 PM
#4
New Member
Thread Starter
Join Date: Apr 2016
Location: Hilo, Hawaii
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
04-29-2016, 08:37 PM
#6
FULLY SEMI AUTOMATIC
iTrader: (9)
shipping a core for rebuild will be expensive. post in a local forum and see if theres a rotary shop in the islands that can do a rebuild
04-29-2016, 09:51 PM
#9
New Member
Thread Starter
Join Date: Apr 2016
Location: Hilo, Hawaii
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
05-02-2016, 01:54 PM
#10
New Member
Thread Starter
Join Date: Apr 2016
Location: Hilo, Hawaii
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
05-02-2016, 02:09 PM
#11
^Like he said, compression #'s are the deciding factor, or you just might end up having 2 dead engines that need to be repaired.
If the numbers are good, that's not too bad a price for an engine AND transmission but shipping is likely going to kill the deal for you...
If the numbers are good, that's not too bad a price for an engine AND transmission but shipping is likely going to kill the deal for you...
05-02-2016, 04:50 PM
#12
New Member
Thread Starter
Join Date: Apr 2016
Location: Hilo, Hawaii
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
what's a good compression number?
Thread
Thread Starter
Forum
Replies
Last Post