Maryland People!
#6202
Registered
Join Date: Feb 2014
Location: Baltimore, MD
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
Yeah, Broken I saw your car, it was the first one I saw and then another galaxy grey showed up later. I was parked next to my friend's MK5 GTI with the BBS RS wheels, we were between The Crab shack and Chik Fil A
#6204
Zoom-Zoom BOOM!
What color is yours? I saw a silver Series I, another gray Series I, and a red Series II. If you were all the way over by the Chick Fil A, I probably missed you, because I was too lazy to cross the street
#6205
Zoom-Zoom BOOM!
Kaite's Cars and Coffee is every Saturday morning at 6:30am: Katie's Cars & Coffee - Katie's Cars & Coffee
I might go this Saturday, but I have a wedding to attend at 3pm that afternoon, so there's an equal chance I might not.
It looks like the Hunt Valley meet occurs every Saturday (from 8:00 - 10:00am) as well, although it will normally be much smaller than it was this past Saturday: Every Saturday Morning
I'll probably be back to this one with some frequency. I haven't posted any of my pictures from this past weekend, but the turnout was incredible; I don't think I've ever seen as many exotics in a single place at once.
I might go this Saturday, but I have a wedding to attend at 3pm that afternoon, so there's an equal chance I might not.
It looks like the Hunt Valley meet occurs every Saturday (from 8:00 - 10:00am) as well, although it will normally be much smaller than it was this past Saturday: Every Saturday Morning
I'll probably be back to this one with some frequency. I haven't posted any of my pictures from this past weekend, but the turnout was incredible; I don't think I've ever seen as many exotics in a single place at once.
#6206
Registered
Join Date: Feb 2014
Location: Baltimore, MD
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
I was the Red Series II. I didn't see another series II besides mine. Only R3 that showed up as well.
#6208
1% evil, 99% hot gas.
iTrader: (21)
For you folks that live over my way in Hazzard County there is a C&C-style car show every warm Friday evening at the Lowes in Aberdeen: The Official Lowes Cruise Website
Looks like they are having a Real Man's garage sale there tomorrow!
Looks like they are having a Real Man's garage sale there tomorrow!
Last edited by wankelbolt; 04-11-2014 at 12:19 PM.
#6210
RX8 nooobie
iTrader: (2)
hunt valley usually has a good amount of people regardless if it's a special event or not. about a 45 min drive for me, annapolis c&c is only 15-20 mins and on sunday mornings, i go there alot. 1 Dock street and starts around 8/8:30 if anyone ever wants to come down, higher end cars. the guy with the aventador comes quite often and to wednesday night waugh chapel in front of applebees too.
anyone here remember the crab rotary meet? possible to do another this summer, i mean, would anyone be interested?
anyone here remember the crab rotary meet? possible to do another this summer, i mean, would anyone be interested?
#6211
Zoom-Zoom BOOM!
hunt valley usually has a good amount of people regardless if it's a special event or not. about a 45 min drive for me, annapolis c&c is only 15-20 mins and on sunday mornings, i go there alot. 1 Dock street and starts around 8/8:30 if anyone ever wants to come down, higher end cars. the guy with the aventador comes quite often and to wednesday night waugh chapel in front of applebees too.
anyone here remember the crab rotary meet? possible to do another this summer, i mean, would anyone be interested?
anyone here remember the crab rotary meet? possible to do another this summer, i mean, would anyone be interested?
Katie's Cars & Coffee - Great Falls - #1 Cars & Coffee in the DMV
I'd definitely be down for another crab feast/meet.
#6212
RX8 nooobie
iTrader: (2)
I'll be trying to make it out to some more C&Cs this year, so I'm sure I'll see some of you guys. I'm doing Great Falls this Saturday if anyone wants to join me.
Katie's Cars & Coffee - Great Falls - #1 Cars & Coffee in the DMV
I'd definitely be down for another crab feast/meet.
Katie's Cars & Coffee - Great Falls - #1 Cars & Coffee in the DMV
I'd definitely be down for another crab feast/meet.
i'll make it to katie's one day, just so dammm busy lately! i posted on the rx7 forum as well in the NE group section, hopefully we can make this happen. Somewhere on the outskirts of baltimore imo would be best, least amount of pot holed roads to hit haha
#6216
Registered
Join Date: Feb 2012
Location: Forest Hill, MD
Posts: 57
Likes: 0
Received 0 Likes
on
0 Posts
Just wanted to post that the rx8 has been successfully up and running for about a week now. All in all it took about 20 - 25 hours. Would have been about 10 - 15if i didn't if i didnt Strip two bolts and waste hours trying to remove them :'( lol. thankfully after getting them off I had no other major problems and i got everything swapped. Im going to post some pics later tonight. Also wanted to give a big thanks to Nathan Atkins and Wanklebolt for their assistance and use of tools haha thanks again for all the help. If anyone every needs help in the local area id be glad to help now that ive done it successfully.
#6217
Hey MD peeps. Would any of you have a series one OEM front lip for sale? I was on a touge run earlier this evening in Frederick back roads and wrecked a possum lol. I ain't even upset about the incident since that sucker is DEAD. Let me know I'm ready to pick up if the price is right. Much appreciated my email is knguyen0087@gmail.com. Thanks again!
#6218
RX8 nooobie
iTrader: (2)
looking at the 24th or 31st for a crab meet. any suggestions? need to find a good place somewhere on the outskirts of baltimore bc i REALLY dont want to put my car through the b-more streets lol
just on the inside of 695 if anyone knows a good place?
Also, anyone local ever clean carbon from the intake? We have code P0410, which is either carbon blocking a valve from completely opening orrr a bad vacuum valve, the one on the side of the pump that puts air down to warm the cat up on start up
just on the inside of 695 if anyone knows a good place?
Also, anyone local ever clean carbon from the intake? We have code P0410, which is either carbon blocking a valve from completely opening orrr a bad vacuum valve, the one on the side of the pump that puts air down to warm the cat up on start up
#6222
Zoom-Zoom BOOM!
Is anyone going to OC this weekend? I'll be down there sans 8, but I'd love to see some other rotards! And if anyone needs a place to stay, I have some extra space to fill in my place on 110th street.
Posted From RX8Club.com Android App
Posted From RX8Club.com Android App
#6223
Registered
iTrader: (6)
Join Date: Mar 2005
Location: Baltimore, MD
Posts: 663
Likes: 0
Received 0 Likes
on
0 Posts
Coilover install
Chris, just replied to your FB post!
On a different note, I'm going to be getting a set of Bilstein PSS9s in the next few weeks. I've installed shocks/springs before and I know these will be similar, but it'd be great if I could get a hand putting them in. I remember having a bugger of a time on the rears, especially. Oh, and I'd wanted to install new bushings on the front control and rear trailing arms while I was at it. This is something I've never done.
Anyone down for an install day? I'll bring the beer!
-Hank
On a different note, I'm going to be getting a set of Bilstein PSS9s in the next few weeks. I've installed shocks/springs before and I know these will be similar, but it'd be great if I could get a hand putting them in. I remember having a bugger of a time on the rears, especially. Oh, and I'd wanted to install new bushings on the front control and rear trailing arms while I was at it. This is something I've never done.
Anyone down for an install day? I'll bring the beer!
-Hank
#6224
V8 Traitor
Join Date: Oct 2011
Location: Abingdon, Harford County, MD
Posts: 600
Likes: 0
Received 5 Likes
on
4 Posts
I'm happy to help, and if anyone is interested, I am fabricating my own set of custom coilovers out of very high quality components for about the cost of the PSS9's
I intend to have them fabbed, dyno'ed, assembled, and installed for the WDCR-SCCA autocross in June. I'm hoping to do well enough on them to justify a start up business making coilovers.
If anyone is interested I can make you a set and tailor the characteristics of the coilover to your needs, most notably custom valving for your dampers. I'd heavily discount anyone who guinea pigs for me while i'm in the teething stages.
I'll post my progress on that in the coming weeks.
Let me know if youre interested ;-)
I intend to have them fabbed, dyno'ed, assembled, and installed for the WDCR-SCCA autocross in June. I'm hoping to do well enough on them to justify a start up business making coilovers.
If anyone is interested I can make you a set and tailor the characteristics of the coilover to your needs, most notably custom valving for your dampers. I'd heavily discount anyone who guinea pigs for me while i'm in the teething stages.
I'll post my progress on that in the coming weeks.
Let me know if youre interested ;-)
#6225
Maryland friends... my car needs to go to make room in the garage. tell your friends. $5000 with lots of high end goodies.
need it gone this week.
https://www.rx8club.com/ne-sale-want...ension-252250/
need it gone this week.
https://www.rx8club.com/ne-sale-want...ension-252250/