o9 underpanels
#2
What parts exactly are you looking for good sir?
-Sheldon.
Last edited by MAZMART "6"; 06-10-2010 at 09:15 AM.
#3
Hey Dude
Looking for the extra panels the 09's have
1- over the oil pan area
2- down both sides of the body/ chassis--they start at the rear of the front wheel, I think or close to that point. There are a total of 3, drivers side is one piece and passenger side has 2 pieces.
Dont think people have caught on to the value of these little things--hehe. So I posted to try and help educate some?
They really smooth the undercar airflow much better.
OD
Looking for the extra panels the 09's have
1- over the oil pan area
2- down both sides of the body/ chassis--they start at the rear of the front wheel, I think or close to that point. There are a total of 3, drivers side is one piece and passenger side has 2 pieces.
Dont think people have caught on to the value of these little things--hehe. So I posted to try and help educate some?
They really smooth the undercar airflow much better.
OD
#4
Registered RX8 Nut
iTrader: (11)
Hey Dude
Looking for the extra panels the 09's have
1- over the oil pan area
2- down both sides of the body/ chassis--they start at the rear of the front wheel, I think or close to that point. There are a total of 3, drivers side is one piece and passenger side has 2 pieces.
Dont think people have caught on to the value of these little things--hehe. So I posted to try and help educate some?
They really smooth the undercar airflow much better.
OD
Looking for the extra panels the 09's have
1- over the oil pan area
2- down both sides of the body/ chassis--they start at the rear of the front wheel, I think or close to that point. There are a total of 3, drivers side is one piece and passenger side has 2 pieces.
Dont think people have caught on to the value of these little things--hehe. So I posted to try and help educate some?
They really smooth the undercar airflow much better.
OD
Its nice to know that mazda added these, I have wanted to build my own for a few years now, either out of aluminum or a thin abs plastic. Who knows if I will ever get around to doing it. I want to attatch them to the mazdaspeed sideskirts and maybe even run them under the rear suspension and attatch it to the rear underspoiler.
#8
Registered RX8 Nut
iTrader: (11)
here they are
http://i297.photobucket.com/albums/m...bo/09under.jpg
sweet or what?
Get to work---please?
OD
http://i297.photobucket.com/albums/m...bo/09under.jpg
sweet or what?
Get to work---please?
OD
Mazda got a CD reduction in 09 from .31 to .30 and I believe it was mostly due to the underpanels and they could have done so much more work under there.
Once I get my supercharger (maf based blow through procharger) dialed in I will be doing a complete underpanel project. I just wish I was able to test CD to see before and after. But since I cant, I will be doing coast down test. Basicly timing how long it takes for the vehicle to coast from 100 down to 60 MPH before and after the mods. I have a few other aero mods in mind including a front spliter (track only).
#10
Registered RX8 Nut
iTrader: (11)
I started a thread to GI on a underbelly pan, plus a few other yummy parts.
https://www.rx8club.com/series-i-wheels-tires-brakes-suspension-55/gi-functinal-aero-parts-front-splitter-underbelly-pan-200996/
https://www.rx8club.com/series-i-wheels-tires-brakes-suspension-55/gi-functinal-aero-parts-front-splitter-underbelly-pan-200996/
Thread
Thread Starter
Forum
Replies
Last Post
maskedferret
Series I Trouble Shooting
5
01-30-2009 09:37 AM