RX-8 low compression
#2
Glutton for punishment
iTrader: (1)
Join Date: Nov 2012
Location: Brentwood
Posts: 193
Likes: 0
Received 0 Likes
on
0 Posts
He's not in Oklahoma but the beauty of interstate shipping means you can pull your engine and send it to RotaryResurrection (in Tennessee) for a rebuild for a hair over what a local place would charge for just labor alone.
Other than that, bump, maybe some of the Oklahoma locals can pipe in.
Also: Your location mentions Augusta, GA. You should update it so when the locals pipe in, it's relevant to your specific location within the "OK area". It's a big area.
Cheers
Ryan
Other than that, bump, maybe some of the Oklahoma locals can pipe in.
Also: Your location mentions Augusta, GA. You should update it so when the locals pipe in, it's relevant to your specific location within the "OK area". It's a big area.
Cheers
Ryan
#4
Glutton for punishment
iTrader: (1)
Join Date: Nov 2012
Location: Brentwood
Posts: 193
Likes: 0
Received 0 Likes
on
0 Posts
Gotta love Fort Sill. I presume that's what brings you to Lawton from Augusta, GA? If you're on post, head down to the auto skills center on Ringgold Rd past the RecPlex. You can have that engine out of the car within a few hours. It's one of the better auto skills shops in the Army.
Also, you're only about 3 hours from Dallas. I know there are board members from DFW that can point you in the right direction around there.
Should you choose RotaryResurrection, you'll be getting a rebuild to a very high standard. In my opinion, it's worth the round trip shipping to send it to him.
Good luck either way.
Also, you're only about 3 hours from Dallas. I know there are board members from DFW that can point you in the right direction around there.
Should you choose RotaryResurrection, you'll be getting a rebuild to a very high standard. In my opinion, it's worth the round trip shipping to send it to him.
Good luck either way.
#5
New Member
Thread Starter
Join Date: Mar 2012
Location: Lawton,OK
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
Yes your right I am stationed at Fort.Sill.
Thanks again I go to the auto skill on Fort. Sill often with my 86 RX-7.
Currently I 'm deployed to Turkey but will remove engine when I get home
Thanks again I go to the auto skill on Fort. Sill often with my 86 RX-7.
Currently I 'm deployed to Turkey but will remove engine when I get home
#6
Registered
iTrader: (9)
Join Date: Jun 2006
Location: Seattle, WA
Posts: 1,285
Likes: 0
Received 0 Likes
on
0 Posts
Brad at RIP in Moore rebuilds engines. I can't vouch for any of his work but i've been to his shop and it seems legit. He seems like more of an RX7 guy but i know he's rebuilt some renesis engines as well.
Rotary Inspired Performance moore ok
Rotary Inspired Performance moore ok
#9
Rotary Enthusiast
Thread
Thread Starter
Forum
Replies
Last Post
cschoeps
RX-8's For Sale/Wanted
0
08-06-2015 12:44 PM
dbarber
Series I Trouble Shooting
14
07-25-2015 01:34 PM