You are currently viewing our forum as a guest, which gives you limited access
to view most discussions and access our other features. By joining our community, at no cost, you will have access to start new topics, reply to conversations, privately message other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join RX8Club.com today!
This will get you the GOODbox, the wiring harness, 8 T-tap connectors, 8 spade-style connectors and 2 pairs of bullet-style connectors. Shipping is included.
There are a total of 47 for sale, first come first serve
Thanks guys for all your support and feedback during the development period!
Edit: For international orders, please include $20 shipping.
Edit: This for the Series 1 RX8, upto and including 2008 model year. It *might* work on a 2009 but I do not have one to test with, so I can't be sure.
Edit: The GOODbox is not compatible with aftermarket headunits like the metra or corksport kit.
This ad is not displayed to registered and logged-in members. Register your free account today and become a member on RX8Club.com!
If they sell out, I can always have more made. But there will be a 3 week turn around time. Alternatively I might just release the schematics and firmware, and let people go nuts
If they sell out, I can always have more made. But there will be a 3 week turn around time. Alternatively I might just release the schematics and firmware, and let people go nuts
Whew, okay thats good, lol... you scared me at first, im not gonna have enough $$$ at first to buy it... thanks man and great product
__________________
.
We are a family like a pack of coyotes is a family; we roll together but we are totally willing to eat our young. -Kane
.
The reason i asked to listen experience show me your experiences ? Know is different thing, you know but you are not experienced ! -thunderberk
Geesh, can you program one to work with a Prosport oil pressure gauge and oil temp gauge? Instructions look very difficult but it's awesome you have the two analog inputs.
Please let me know if you sell out, I want one but I have some stuff to buy first
Alternatively I might just release the schematics and firmware, and let people go nuts
That would be awesome!
Or allow people to buy a kit with all the components and PCB to solder themselves.
This would take away the SMT manufacturing processes.
__________________ Current Mods: RB REVi Intake & Ram Air Duct, AP Catback Exhaust, MazSport DR Midpipe, AP Pulley, BHR Ignition Coils, BHR/SPEC Flywheel, ACT Counterweight, Exedy Stage 1 Clutch Kit, HD Release Bearing, AccessPort w/MazdaManiac tune, REmedy Thermostat & Water Pump, AFE Short Shifter, Lotek Pod with ProSport Gauges, Axxess iPod Adapter, Illuminated Shift Knob, Bridgestone Potenza RE760, OPTIMA 35 RedTop Battery. Oils: Engine= Royal Purple 5w30, Trans= Redline MT-90, Diff= Redline 75w90
perhaps you have answered this, does it do mpg display?
If not can i use a flow sensor to feed the 0-5v analog input
It does not. I've tried calculating it from the MAF, air/fuel and speed, but it is wildly inaccurate that way. I don't think we want to look at the mpg anyway haha.
Man I wish I could get my oil temp and oil pressure gauge to work with this. I read the directions and it might as well be in Greek as far as the aux inputs are concerned
Man I wish I could get my oil temp and oil pressure gauge to work with this. I read the directions and it might as well be in Greek as far as the aux inputs are concerned
It really isn't too bad. You just have to know how the voltage from the sensor maps to the temp/pressure. So if you have 2.3Volts from the oil pressure sensor, what is the pressure that that represents? You would use the gauge you have now to determine this.
Hmmmm, If I give the manufacture of the sending units/gauges can you figure it out and sell as a package? To have all the data currently and oil pressure and oil temp would be perfect.
Instructions look very difficult but it's awesome you have the two analog inputs.
That would be awesome!
Linear Mode
