Notices
General Automotive Discuss all things automotive here other than the RX-8

Production Camaro revealed!

Thread Tools
 
Search this Thread
 
Rate Thread
 
Old 07-18-2008, 08:17 PM
  #1  
Registered User
Thread Starter
 
Lithium Lotus's Avatar
 
Join Date: Jun 2007
Posts: 136
Likes: 0
Received 0 Likes on 0 Posts
Production Camaro revealed!







This is it. The 2010 Chevy Camaro, revealed in all its glory. According to details we've been told by the folks breaking the embargo, the new Chevy Camaro will come in LS, LT and SS (yes, we know there's a badge there that says "RS")— and be available in either 6-speed manual or auto flavors. Under the hood, a 296 HP 3.6-liter V6 or a 416 HP 6.2-liter V8 with cylinder deactivation. And check out that interior — looks very muscular to us. Weight? How about 3,747 lb [same as 2006 GTO] — lighter than the Challenger. Full details below the jump.

The Camaro will come in LS, LT and full-on SS specs and be available with 6-speed manual and auto transmissions. Under the bonnet sit fuel-efficient 296bhp 3.6-liter V6 and 416bhp 6.2-liter V8 engines, which can run on fewer cylinders to improve economy.
It shouldn't just be a burnout king either, handling should be pretty good thanks to an all-independent suspension setup and a StabiliTrak stability control system. 4-pot Brembo brakes front and rear shed the speed on the SS. Weight balance is split 52/48 front/rear too, but the Camaro is a porker, weighing in at more than 1,700kgs.

The interior gets cool LED lighting, leather seats on posher models and dials and gauges inspired by 1969 Camaros. The US gets the car in early 2009, while we'll get it some time after that. Super.
Old 07-18-2008, 08:28 PM
  #2  
Registered
iTrader: (2)
 
Jasonawojo's Avatar
 
Join Date: Feb 2007
Location: Florida
Posts: 703
Likes: 0
Received 0 Likes on 0 Posts
A 300HP V6 with cylinder shutoff might keep it in the game, even if gas prices keep rising. Not bad, considering the old RS. Of course, as with the Challenger, you need the V8 for it to be genuine muscle hah.
Old 07-18-2008, 08:33 PM
  #3  
Registered User
Thread Starter
 
Lithium Lotus's Avatar
 
Join Date: Jun 2007
Posts: 136
Likes: 0
Received 0 Likes on 0 Posts
Old 07-18-2008, 08:39 PM
  #4  
Registered
 
Design1stCode2nd's Avatar
 
Join Date: Jun 2005
Posts: 946
Likes: 0
Received 0 Likes on 0 Posts
And thats just the V6. The SS is going to be beastly.

http://www.edmunds.com/insideline/do...cleId=129446#5
Old 07-18-2008, 09:54 PM
  #5  
The Slow and the Serious
 
kvndoom's Avatar
 
Join Date: Jul 2007
Location: Communistwealth of Virginia
Posts: 730
Likes: 0
Received 0 Likes on 0 Posts
badass. pure badass. nice numbers, love those throwback gauges, and can you say "6-speed manual"? will be interesting to see how Ford counters this, at least engine-wise.
Old 07-18-2008, 09:58 PM
  #6  
TNC
iTrader: (1)
 
HockeyRX-8's Avatar
 
Join Date: Feb 2008
Location: Shaolin, NY
Posts: 3,858
Likes: 0
Received 0 Likes on 0 Posts
That's insane looking. I really like it.

edit: my 500th post!
Old 07-18-2008, 10:05 PM
  #7  
Registered User
 
Garrett's Avatar
 
Join Date: Apr 2008
Location: VC
Posts: 72
Likes: 0
Received 0 Likes on 0 Posts
That looks absolutely gorgeous; I love it.
Old 07-18-2008, 10:15 PM
  #8  
Registered User
 
thecow135's Avatar
 
Join Date: Aug 2007
Posts: 493
Likes: 0
Received 0 Likes on 0 Posts
it stole our wheels!
Old 07-18-2008, 10:16 PM
  #9  
Registered
 
MisplacedRotors's Avatar
 
Join Date: May 2006
Location: pflugerville, tx
Posts: 136
Likes: 0
Received 0 Likes on 0 Posts
possibly i'm an idiot...but center console gauge cluster theres a torque gauge?? 0-370 lbft of what?
Old 07-18-2008, 10:23 PM
  #10  
That's the UFOurdoor
 
Altair 8's Avatar
 
Join Date: Jul 2007
Location: Lafayette, LA
Posts: 104
Likes: 0
Received 0 Likes on 0 Posts
saw a black one on the streets in Lafayette, LA this past weekend. i about died. i dont know who or why it was out on the streets, but it was going the opposite direction and couldnt take a pic of it. very nice though, sexy.
Old 07-18-2008, 10:38 PM
  #11  
Registered User
 
playdoh43's Avatar
 
Join Date: Jun 2004
Location: University of Maryland
Posts: 2,510
Likes: 0
Received 1 Like on 1 Post
interesting placement of gauge cluster on the center console... very unique. I like
Old 07-18-2008, 11:16 PM
  #12  
Registered
 
Design1stCode2nd's Avatar
 
Join Date: Jun 2005
Posts: 946
Likes: 0
Received 0 Likes on 0 Posts
Much rather have a bigger cubby than the gauges but from what I understand it's a nod to the late 60's Camaro's. If it's priced right I'll most likely get this in a year or two. I'm curious what the SS will have appearance wise to differentiate it from the V-6 here. Guess we'll find out on Monday at the dealer reveal thing.

Ford will have to do something more than a refresh and larger engine. IRS, almost 50/50 weight balance and over 400hp for probably a few grand more than a Mustang GT is s hell of a bargain.
Old 07-18-2008, 11:20 PM
  #13  
Registered User
Thread Starter
 
Lithium Lotus's Avatar
 
Join Date: Jun 2007
Posts: 136
Likes: 0
Received 0 Likes on 0 Posts
The 68-69 Camaro had console gauges if you bought one with the RS package [RS, Z28/RS, SS/RS]



And there are aftermarket pods available if your car didn't have them.
Old 07-18-2008, 11:21 PM
  #14  
mkuhnracing.com
iTrader: (3)
 
TopGear8's Avatar
 
Join Date: Jun 2007
Location: Charlotte, NC
Posts: 6,212
Likes: 0
Received 4 Likes on 4 Posts
Looks pretty cool. Not a big fan of the interior tho.
Old 07-19-2008, 12:46 AM
  #15  
Hit & Run Magnet
iTrader: (3)
 
kersh4w's Avatar
 
Join Date: May 2007
Location: DC Area
Posts: 6,690
Likes: 0
Received 3 Likes on 3 Posts
Originally Posted by thecow135
it stole our wheels!
my thoughts exactly! bastards!
Old 07-19-2008, 01:10 AM
  #16  
Registered
 
fahrfegneugen's Avatar
 
Join Date: Jan 2008
Location: Wash/Idaho
Posts: 1,467
Likes: 0
Received 1 Like on 1 Post
Looks way too big to be fun to drives beside off the line and the driving position looks iffy... Nice car though!
Old 07-19-2008, 11:02 AM
  #17  
Huge hole is huge
 
CyberPitz's Avatar
 
Join Date: Feb 2008
Location: Joplin, MO
Posts: 3,191
Likes: 0
Received 1 Like on 1 Post
The center console is just so busy!
Old 07-19-2008, 11:10 AM
  #18  
It's a Cavalier
 
YaXMaNGTO's Avatar
 
Join Date: May 2007
Location: Austin, TX
Posts: 1,926
Likes: 0
Received 5 Likes on 2 Posts
Originally Posted by MisplacedRotors
possibly i'm an idiot...but center console gauge cluster theres a torque gauge?? 0-370 lbft of what?
I hadn't noticed or read about that! Not a Veyron style HP gauge, but a torque gauge. Theyre going to have to have a kit to change the scale on that thing. I bet we see 500-1000 lb-ft Camaros a few months after release.
Old 07-19-2008, 11:28 AM
  #19  
It's a Cavalier
 
YaXMaNGTO's Avatar
 
Join Date: May 2007
Location: Austin, TX
Posts: 1,926
Likes: 0
Received 5 Likes on 2 Posts
Originally Posted by Design1stCode2nd
If it's priced right I'll most likely get this in a year or two.

IRS, almost 50/50 weight balance and over 400hp for probably a few grand more than a Mustang GT is s hell of a bargain.
Man. I sure need a few of my investments to do a little better. COME ON U.S. ECONOMY! I'll get one too. Looks like it will be a fun car.

That SS is gonna a be a bad ****. I don't know if you guys realize it or not, but to get an NA LS3 to a very streetable 500whp is not difficult. It's a great engine.
Old 07-19-2008, 11:34 AM
  #20  
Zoom x 2
 
XlYesterdaYlX's Avatar
 
Join Date: May 2008
Location: 209
Posts: 365
Likes: 0
Received 0 Likes on 0 Posts
Looks better than when i saw it in transformers!
Old 07-19-2008, 02:09 PM
  #21  
Mu ha.. ha...
 
Razz1's Avatar
 
Join Date: Aug 2004
Location: Cali
Posts: 14,361
Likes: 0
Received 3 Likes on 3 Posts
I heard the Camaro is on hold now do to finances and the gas crisis.

They are very late into the 2nd Motorhead generation.
Old 07-19-2008, 03:23 PM
  #22  
I DO IT FOR THE LULZ!
 
Mech_head's Avatar
 
Join Date: May 2007
Location: Eastman, Ga
Posts: 82
Likes: 0
Received 0 Likes on 0 Posts
Too heavy. Looks Great. Interior looks acceptable for the price point of the car. Mustang owners might as well pack it up. NO WAY would i buy ANY stang over this car. And that goes for the GT500 too.

Mmmm... LS goodness in what looks to be a good looking and handling handling package. I think we have a winner.
Old 07-19-2008, 03:34 PM
  #23  
Club Marbles Member
 
Raptor2k's Avatar
 
Join Date: Jul 2005
Location: DFW, TX
Posts: 3,252
Likes: 0
Received 0 Likes on 0 Posts
Not bad.
Old 07-19-2008, 05:28 PM
  #24  
Registered
 
MisplacedRotors's Avatar
 
Join Date: May 2006
Location: pflugerville, tx
Posts: 136
Likes: 0
Received 0 Likes on 0 Posts
but really a torque gauge?? how useful is that going to be?
Old 07-19-2008, 06:15 PM
  #25  
Registered User
Thread Starter
 
Lithium Lotus's Avatar
 
Join Date: Jun 2007
Posts: 136
Likes: 0
Received 0 Likes on 0 Posts
About as usefull as the g-meter in the GTR.


You have already rated this thread Rating: Thread Rating: 0 votes,  average.

Quick Reply: Production Camaro revealed!



All times are GMT -5. The time now is 06:23 PM.