Exhaust cutout switch help!!! (Not on an RX-8)
10-30-2013, 10:05 PM
#1
Exhaust cutout switch help!!! (Not on an RX-8)
So I bought a cat-less midpipe with an electronic cutout in it, but it didn't come with a switch. I am not an expert in automotive wiring, but from my understanding it will require a reverse polarity switch. This of course means nothing to me. I need some help and guidance!
10-31-2013, 09:11 AM
#3
Registered
iTrader: (2)
Join Date: Oct 2007
Location: Pacific Northwest
Posts: 16,684
Likes: 0
Received 239 Likes
on
109 Posts
Watch this:
Now spend some time thinking about if you really want that under the car, where there is stuff to burn. Stuff like fuel lines...
Posted From RX8Club.com Android App
Now spend some time thinking about if you really want that under the car, where there is stuff to burn. Stuff like fuel lines...
Posted From RX8Club.com Android App
10-31-2013, 10:21 AM
#4
Haha well I have a boosted BMW now so that won't be as much of a problem. I would never do that with a rotary, I had plenty of flames with my catless exhaust. I just posted on here because there is much more knowledge with electronics on here than with a bimmer forum.
10-31-2013, 10:26 AM
#6
Registered
iTrader: (2)
Join Date: Oct 2007
Location: Pacific Northwest
Posts: 16,684
Likes: 0
Received 239 Likes
on
109 Posts
I don't think you understood my point. Exhaust cutouts on an RX-8 are a really bad idea, which is why there isn't really any information here on how to do it.
You question seems to be basic electrical though, and not specific to any vehicle.
There aren't many Speed3 owners on the RX-8 forum. Try the Speed3 forum.
You question seems to be basic electrical though, and not specific to any vehicle.
There aren't many Speed3 owners on the RX-8 forum. Try the Speed3 forum.
10-31-2013, 07:07 PM
#9
Registered
iTrader: (2)
Join Date: Oct 2007
Location: Pacific Northwest
Posts: 16,684
Likes: 0
Received 239 Likes
on
109 Posts
In which case, I'm moving this to general automotive and renaming. You actually never stated that this was for a non-RX-8, just that you have another car, and being as that it is on an RX-8 forum and was created in a subforum for Series 1 RX-8 modifications ... a misunderstanding became inevitable.
Perhaps you will get more assistance from a more appropriate forum.
Perhaps you will get more assistance from a more appropriate forum.
Last edited by RIWWP; 10-31-2013 at 07:17 PM.
Thread
Thread Starter
Forum
Replies
Last Post
dbarber
Series I Trouble Shooting
14
07-25-2015 01:34 PM
