my 13b rew swap!
#1
my 13b rew swap!
here is my swap~ much work! but! finally in final steps!
1.engine 13b rew 1995 ported! and repair!
2.turbonetics t76 cold ! 115 hot
3.microtech lt10 with x4
4.walbroo 4oolp fuel pump intank
5.10an fuel lines
6.kgparts fuel rails
7.860cc primary inyectors
8.1600cc bosh secundary inyectors
9.aeromotive 1@1 regulator
10.44mm wastegate
11.turbosmart blow off
12.custom turbo mannifold
13.all oil lines made in braided!
14.battery relocation with 1/0 welded cable in the trunk
15.5speed rx8 transmission compatible with fd3s !
16.1985 3 row radiator
17.ford taurus electric fan! 2 speed
18.MSD COILS!
19.front timimng cover rx7 turbo with ignition!
20.kmr engine mounts!
.........
still to do.
1.trotter cable (accelarotor) installation with gas pedal
2.recondition oem engine rx8 wires ...ELIMINATE ALL NO NEED.
I NEED SOME HELP! I NEED TO know how cables i need to use!
i have crank sensor rx8 for activate eps! but other cables! how much i need!?.
some pics
https://www.dropbox.com/home/rx8%20rew
here is a link for first start up! the engine!
https://www.dropbox.com/s/2if1xymzew...113_171321.mp4
1.engine 13b rew 1995 ported! and repair!
2.turbonetics t76 cold ! 115 hot
3.microtech lt10 with x4
4.walbroo 4oolp fuel pump intank
5.10an fuel lines
6.kgparts fuel rails
7.860cc primary inyectors
8.1600cc bosh secundary inyectors
9.aeromotive 1@1 regulator
10.44mm wastegate
11.turbosmart blow off
12.custom turbo mannifold
13.all oil lines made in braided!
14.battery relocation with 1/0 welded cable in the trunk
15.5speed rx8 transmission compatible with fd3s !
16.1985 3 row radiator
17.ford taurus electric fan! 2 speed
18.MSD COILS!
19.front timimng cover rx7 turbo with ignition!
20.kmr engine mounts!
.........
still to do.
1.trotter cable (accelarotor) installation with gas pedal
2.recondition oem engine rx8 wires ...ELIMINATE ALL NO NEED.
I NEED SOME HELP! I NEED TO know how cables i need to use!
i have crank sensor rx8 for activate eps! but other cables! how much i need!?.
some pics
https://www.dropbox.com/home/rx8%20rew
here is a link for first start up! the engine!
https://www.dropbox.com/s/2if1xymzew...113_171321.mp4
Last edited by victor13b; 01-18-2014 at 07:22 PM. Reason: video preview
#3
#4
I use mechanic metering pump.1987 with timing cover 1987 . I need to know I don't have problems with the OEM rx8 electronic metering pump?
Posted From RX8Club.com Android App
Posted From RX8Club.com Android App
#5
Renesis out... REW in
iTrader: (3)
You need the RX8 ECU for EPS, so you will have to keep the CAS in place for that to work.( you can mount it to the front cover, it's been posted before)
The dash works off the RX8 ECU also.
Then you'll need to have the RX8 OMP connected so the RX8 ECU doesn't put the car in into limp mode. (Connect it up and tuck it out of the way somewhere).
G/L bro, looks like your getting closer
.
The dash works off the RX8 ECU also.
Then you'll need to have the RX8 OMP connected so the RX8 ECU doesn't put the car in into limp mode. (Connect it up and tuck it out of the way somewhere).
G/L bro, looks like your getting closer
.
#8
iam closer to start the engine to check leaks! in oil system and fuel system!
very thanks to dznutzuk for tips! help!
#10
Uncontrollable drifter
#17
Im finishing with my 13b re swap. I have it running with a haltech and left the factory ecu for the dash and the electrics stuff. The real question is if im going to be able to get the power stearing to work this way? Or what specificly i need for it to wor? I see you said cas but im using the engines factory one wich is the 24/ 2 tooth type. Is it possible to make it work with that or will i have to change my ignition to maje it work?
#23
I have the Cas that comes with the 13b-re engine. Wich is same as the turbo 2 one. I understand you guys are telling me i need the factory cas for the rx8 for the power steering to work. Is it a RPM signal that tells the rack to activate? If thats the case then it could be activated with a tach output from my ECU? What you guys think? I loved too see youre set up redrx but dont have instagram. Looks like using the rx8 timing cover would have been the best way to go but too late for that now. Just want to register and use the car already.