Air fuel ratio
02-08-2008, 04:55 PM
#2
It will help you tune the car with the proper AFR and you will get more hp out of it.
Yes it is better to know your AFR with FC because it will give you an idea of how rich or lean your car is.. To lean and you could blow your engine.
Yes it is better to know your AFR with FC because it will give you an idea of how rich or lean your car is.. To lean and you could blow your engine.
02-08-2008, 05:03 PM
#3
Check it out - a forum dedicated to the subject .
https://www.rx8club.com/series-i-engine-tuning-forum-63/
You can't improve much on FC because Mazda already did a good job with that .
https://www.rx8club.com/series-i-engine-tuning-forum-63/
You can't improve much on FC because Mazda already did a good job with that .
02-08-2008, 05:15 PM
#4
Registered User
Thread Starter
Join Date: Apr 2007
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
What gadget to use?
My friend has an SAFC to tune his car's AFR
so does that work with our 8
or is there any other better gadget to use to control the AFR?
Is ScangaugeII able to monitor AFR?
If Scangauge is ablt to monitor AFR, can I use it to control or tune the AFR to our 8?
so does that work with our 8
or is there any other better gadget to use to control the AFR?
Is ScangaugeII able to monitor AFR?
If Scangauge is ablt to monitor AFR, can I use it to control or tune the AFR to our 8?
02-09-2008, 08:16 AM
#6
Registered User
iTrader: (1)
Join Date: Jun 2004
Location: Los Angeles
Posts: 222
Likes: 0
Received 0 Likes
on
0 Posts
SAFC does not work on rx8. If you want real time reliable and convenient monitoring of your afr, get a wide band o2 sensor & gauge, such as the innovate xd-16 stand alone kit. If you want to control or tune the afr, get an interceptor-x, or motec, or any stand alone ecu that's compatible with rx8. However, make sure you know what you are doing if you are tuning it yourself.
02-10-2008, 01:06 PM
#10
Registered User
Thread Starter
Join Date: Apr 2007
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
I did ECU remapped by KnightSport did they lean the AFR a bit like Racing Beat does?
I heard of another gadget Blitz's I-fit or I-Vit that just need to plug it in like scangauge II that controls AFR. Does that work?
Anyway thx bros for all the advice.
I heard of another gadget Blitz's I-fit or I-Vit that just need to plug it in like scangauge II that controls AFR. Does that work?
Anyway thx bros for all the advice.
02-10-2008, 07:54 PM
#12
Registered User
Join Date: Oct 2005
Posts: 299
Likes: 0
Received 0 Likes
on
0 Posts
blitz i color flash does not control A/F ratios. its also does not display it. so far i know it only works for toyota MarkX and IS250.
02-11-2008, 01:46 AM
#13
Registered User
Join Date: Oct 2004
Posts: 2,457
Likes: 0
Received 0 Likes
on
0 Posts
You already did the remap, why still looking for other solution??
02-13-2008, 01:21 AM
#15
SC 300HP!!
Join Date: Dec 2004
Location: Singapore, North-east
Posts: 3,182
Likes: 0
Received 0 Likes
on
0 Posts
Thread
Thread Starter
Forum
Replies
Last Post
JimmyBlack
Series I Major Horsepower Upgrades
273
02-10-2020 10:23 PM
