As per title.....Going for $180

Strut is in tip top condition. Will throw in the cusco sticker as well!

PM me if interested ok!

Yo dude, since you are selling your front strut i think you must be going for SC. Kekekeke....

pwah...SC.... the world's fastest ru hua liao, dun pray pray

ah ba then guys.....SC u know...see me from rear mirror must drive to the left ok.


like real lah...

changing cos the suspension mounting is a little different from my cusco mounting...so have to change the cusco in order to accomodate the suspension.

Yo dude, since you are selling your front strut i think you must be going for SC. Kekekeke....
he wans to be fastest NA in spore.....

he wans to be fastest NA in spore.....

now that you know......i'll have to kill you

too much sex and violence in this thread liao.... you can picture it.... ruhua's makeup streaking at 250kmh

I got a few enquiries...so just want to clear some doubts that were asked.

Can the engine cover still be put on - YES. No issues. Only thing is that you have to do very minor cutting on the side of the cover...which already has the groove in place as the original strut is also there. Just have to cut a little bit to fit the cusco strut.

$180 for the cusco is a steal!!! i paid so much more for mine...... i concur with ngkenny, no issues putting the engine cover on... There IS a difference in handling with this sweet mod.

highly recommended!

$180 for the cusco is a steal!!! i paid so much more for mine...... i concur with ngkenny, no issues putting the engine cover on... There IS a difference in handling with this sweet mod.

highly recommended!

agree that 180 is cheap.

anyhow, the cusco is two point strut right? :Wconfused if it is, how different can it be as compared with stock. unless stock strut is very soft? could it be psychological?

i may be wrong but think it would help in brake response (due to brake stopper) and make engine bay look nicer only? pls clarify. thanks.

If I have the cash I will get it...where in the world can you can a strut bar and brake stopper for only 180 bucks....sing dollar.

dont forget he threw in the sticker as well...handling responsiveness up by 2%...hehe

Here are some pics of how it looks like with the engine cover on.


http://www.rx8club.com/attachment.php?attachmentid=84842&stc=1

http://www.rx8club.com/attachment.php?attachmentid=84843&stc=1

http://www.rx8club.com/attachment.php?attachmentid=84844&stc=1

http://www.rx8club.com/attachment.php?attachmentid=84845&stc=1

http://www.rx8club.com/attachment.php?attachmentid=84846&stc=1

ng + 1??

heheheh

hee...u noticed ;)

ng + 1??

heheheh
becos NGkenny?????

agree that 180 is cheap.

anyhow, the cusco is two point strut right? :Wconfused if it is, how different can it be as compared with stock. unless stock strut is very soft? could it be psychological?

i may be wrong but think it would help in brake response (due to brake stopper) and make engine bay look nicer only? pls clarify. thanks.

hi,

yeah....a simple 2 pt strut. stock is weeny...this is bigger...and more bad ass looking. I think it covers the 3 screw mounting point instead of the 2 from the stock, thus more chasis coverage. stock is not bad...cos car comes with it. But with the cusco...steering response is defintely tighter as opposed to the stock. more feel. Like what bruce lee will say.....'dun think....feellllllll' haha

Brake response wise....ok....it does its job.
make engine bay look nicer. Score brownie points cos its blue...and my car is blue....so of cos nicer.

hope i cleared ur doubts.

k

becos NGkenny?????
i dun see wats the big fuss over this strut bar.

2 point STRUT bar is straight forward. a piece of bar to stabilise ur handling and cornering.

1. This is made by cusco, $180 for this cusco brand alone is more than value for money oredi.
2. This comes with brake stopper, and again, its only $180.
3. This is thicker and of better material than stock and its $180 only.
4. Putting this as "used goods" aside, this CUSCO strut bar is by far the best value for money strut bar out in the market. The earlier batches of rx8 owners mostly have this strut bar. Even the most stock looking rx8 (u noe that im referring to u, stock black rx8) has this strut bar to replace the original bar. Even if u dun buy this for ur performance, u can buy this for aesthetics bcos its only $180 only.

2 cents worth of opinion.

i dun see wats the big fuss over this strut bar.

2 point STRUT bar is straight forward. a piece of bar to stabilise ur handling and cornering.

1. This is made by cusco, $180 for this cusco brand alone is more than value for money oredi.
2. This comes with brake stopper, and again, its only $180.
3. This is thicker and of better material than stock and its $180 only.
4. Putting this as "used goods" aside, this CUSCO strut bar is by far the best value for money strut bar out in the market. The earlier batches of rx8 owners mostly have this strut bar. Even the most stock looking rx8 (u noe that im referring to u, stock black rx8) has this strut bar to replace the original bar. Even if u dun buy this for ur performance, u can buy this for aesthetics bcos its only $180 only.

2 cents worth of opinion.

no fuss, juz seeking further clarifications.

kennyng: very nice engine bay you have there. have PMed you.

agree that 180 is cheap.

anyhow, the cusco is two point strut right? :Wconfused if it is, how different can it be as compared with stock. unless stock strut is very soft? could it be psychological?

i may be wrong but think it would help in brake response (due to brake stopper) and make engine bay look nicer only? pls clarify. thanks.

The stock strut is like a "BROOM STICK"
can be broken with our bare hands. U can try removing it and it can be flex easily.

i dun see wats the big fuss over this strut bar.

2 point STRUT bar is straight forward. a piece of bar to stabilise ur handling and cornering.

1. This is made by cusco, $180 for this cusco brand alone is more than value for money oredi.
2. This comes with brake stopper, and again, its only $180.
3. This is thicker and of better material than stock and its $180 only.
4. Putting this as "used goods" aside, this CUSCO strut bar is by far the best value for money strut bar out in the market. The earlier batches of rx8 owners mostly have this strut bar. Even the most stock looking rx8 (u noe that im referring to u, stock black rx8) has this strut bar to replace the original bar. Even if u dun buy this for ur performance, u can buy this for aesthetics bcos its only $180 only.

2 cents worth of opinion.

Very handsome....

:kiss:

i dun see wats the big fuss over this strut bar.

2 point STRUT bar is straight forward. a piece of bar to stabilise ur handling and cornering.

1. This is made by cusco, $180 for this cusco brand alone is more than value for money oredi.
2. This comes with brake stopper, and again, its only $180.
3. This is thicker and of better material than stock and its $180 only.
4. Putting this as "used goods" aside, this CUSCO strut bar is by far the best value for money strut bar out in the market. The earlier batches of rx8 owners mostly have this strut bar. Even the most stock looking rx8 (u noe that im referring to u, stock black rx8) has this strut bar to replace the original bar. Even if u dun buy this for ur performance, u can buy this for aesthetics bcos its only $180 only.

2 cents worth of opinion.


and the + 1 refers to the little one?
Then next time got more babies must change already

So to sum up Mr Ivan's point.

IT'S ONLY 180!!
Don't need to say anymore. right.

The stock strut is like a "BROOM STICK"
can be broken with our bare hands. U can try removing it and it can be flex easily.

heehee....morgan...let's arm wrestle!

now that you said it....i think i can say it out loud.

YES LADIES AND GENTLEMAN....i broke the stock one with my bare hands.

http://www.wwe.com.tw/upload/news/BATISTA29998.jpg

just learnt how to insert image into the post....damn shiok....haha

dolly....the + 1 is like post count.......

see...i just added one more post count!

As per title.....Going for $180

Strut is in tip top condition. Will throw in the cusco sticker as well!

PM me if interested ok!


still for sale?
call mi at 91800085
thankz...

i just noticed that all though he's very well built, his XXXX a bit da small relative to his size

strut is technically sold

Will let you guys know tomorrow if the deal does not go through.

thanks guys!

heehee....morgan...let's arm wrestle!

now that you said it....i think i can say it out loud.

YES LADIES AND GENTLEMAN....i broke the stock one with my bare hands.

http://www.wwe.com.tw/upload/news/BATISTA29998.jpg


Too bad u broke your Stock Strut.

If not we can play Star Wars.

U can be Luke and I can be your FATHER.... :)
Just Joking

no fuss, juz seeking further clarifications.

kennyng: very nice engine bay you have there. have PMed you.
bro, i not referring to you.... i was just saying generally..... i apologise if u misunderstood

bro, i not referring to you.... i was just saying generally..... i apologise if u misunderstood

eh no problem. it's a pity i was too slow to get this deal. i was surprised with how soft the stock bar is. also, you have rightly pointed out it's only $180 and it's functional so what the hell.

strut is technically sold

Will let you guys know tomorrow if the deal does not go through.

thanks guys!


hei bro if not close remember it's mine :rock:

now it's no longer $180.00. it's $180.02 becoz C7 just added his 2 cents worth.

anyway for 2 pt strut bar, my vote goes to the Alutec model made for the 8 with the rotary logo in the centre. really bad ass looking.

That alutec one really looks to prominent and heavy. I wish they had the CF one for the 8.

Strut sold! thanks guys

i got one excatly the same one for sale too. I got it from yap bros. it's only 2 weeks old still got receipt as evidence..
now going for sale cause kenna deeper poison...

i got it for $300 pm me if you are interested with a reasonable price and it's yours.

regards
Kelvin Koh

Can I guess what the deeper poison is? kekeke

B52 and Screwdriver.

item sold.

tks

regards
Kelvin Koh