Notices
Canada Forum For our friends up North, eh!

"N" flash (SSP61) on HOLD???

Thread Tools
 
Rate Thread
 
Old Apr 1, 2005 | 08:27 AM
  #1  
khtm's Avatar
Thread Starter
I like rusty spoons
 
Joined: Jul 2004
Posts: 1,959
Likes: 0
From: Calgary, Alberta
Unhappy "N" flash (SSP61) on HOLD???

Yesterday I used my dealer's website to submit a service request for next week. I wanted the N flash, the AC amplifier, a new battery, and the plastic clip on the centre console track to be replaced.

I got this e-mail back from them this morning:

Good Morning,

The SSP61 reflash has been put on hold by Mazda Canada until they update it a little more. We can definitely get you on on Monday to check the other stuff. If that works ok for you just email back and let me know.
What the hell? Is this true? Anyone else been told this?
Reply
Old Apr 1, 2005 | 08:38 AM
  #2  
MyRxBad's Avatar
Fb's rock!
iTrader: (1)
 
Joined: Jan 2002
Posts: 973
Likes: 0
From: Toronto/Oshawa
Maybe they haven't upgraded their WDS system and need to download the lastest version to support the latest flash...
Reply
Old Apr 1, 2005 | 09:13 AM
  #3  
khtm's Avatar
Thread Starter
I like rusty spoons
 
Joined: Jul 2004
Posts: 1,959
Likes: 0
From: Calgary, Alberta
I'm not sure what all that means, but I know other people in Calgary have had the "N" flash from the same dealer...
Reply
Old Apr 1, 2005 | 09:14 AM
  #4  
idriverx8's Avatar
Registered
 
Joined: Aug 2003
Posts: 66
Likes: 0
From: SALT LAKE CITY
What is an N Flash and what does it do ?
Is it just a Canada thing ?
Reply
Old Apr 1, 2005 | 09:14 AM
  #5  
rotten42's Avatar
Mentalhealth is overrated
 
Joined: Aug 2004
Posts: 2,289
Likes: 2
From: Calgary
Which dealer?...I had the flash done at Sunridge.

Keep us updated on the other stuff.
Reply
Old Apr 1, 2005 | 09:25 AM
  #6  
khtm's Avatar
Thread Starter
I like rusty spoons
 
Joined: Jul 2004
Posts: 1,959
Likes: 0
From: Calgary, Alberta
What is an N Flash and what does it do ?
Is it just a Canada thing ?
https://www.rx8club.com/series-i-tech-garage-22/lastest-pcm-n-flash-more-power-54948/

Which dealer?...I had the flash done at Sunridge.
North Hill...for some reason that's where I thought you had it done, too. hmmmm....
Reply
Old Apr 1, 2005 | 09:58 AM
  #7  
khtm's Avatar
Thread Starter
I like rusty spoons
 
Joined: Jul 2004
Posts: 1,959
Likes: 0
From: Calgary, Alberta
Well, I just called Sunridge and they can do it, so I've got an appt on Tuesday. Thanks for the info, rotten!
Reply
Old Apr 1, 2005 | 11:08 AM
  #8  
Gord96BRG's Avatar
Registered
 
Joined: Jan 2003
Posts: 2,845
Likes: 1
From: Calgary, AB
The N Flash was on hold back in January, so I didn't get it at my last visit at Kramer then - but it's not on hold anymore! North Hill might be having WDS problems...

(For idriverx8 - no, the PCM flashes are not a Canada thing, they apply to all RX-8 and most recently introduced Mazda vehicles. It's how Mazda can update the Powertrain Control Module software programming on vehicles already in service. There are many threads, including a few sticky threads, discussing Flashes in the Tech Discussion forum section).

Regards,
Gordon
Reply
Old Apr 1, 2005 | 09:51 PM
  #9  
BlueFrenzy's Avatar
Rotary Powered Decepticon
 
Joined: Aug 2004
Posts: 1,618
Likes: 1
From: Calgary, AB
Doh!! I was going to call NorthHill for the upgrade! My brakes are squeeky now. Mmmmm ... free service.
Reply
Old Apr 3, 2005 | 06:41 AM
  #10  
orange0303's Avatar
TSR-SE3P (NA TUNE)
 
Joined: May 2004
Posts: 380
Likes: 0
From: Port Coquitlam, BC
it was funny.. when i go to the dealer.. said my car don't need any flash or anything
they said my VIN number is not in the range of need reflash or re-call
Reply
Old Apr 12, 2005 | 01:27 PM
  #11  
Fritz the Cat's Avatar
Registered User
 
Joined: Jun 2004
Posts: 323
Likes: 0
From: Calgary, Alberta, Canada
Update: I just got a call from North Hill, where my baby's getting the summer wheels and tires back. They still can't do the N flash. I think I'll wait until the next oil change, and if they don't have it by then, I'll go to Kramer.
Reply
Old Apr 12, 2005 | 08:31 PM
  #12  
BlueFrenzy's Avatar
Rotary Powered Decepticon
 
Joined: Aug 2004
Posts: 1,618
Likes: 1
From: Calgary, AB
Yea, I called them last Friday and they told me that it'll be roughly a month before they get it going again. Not sure if their computers are screwy or that they are holding something secret that the other two dealers don't know about. I'm thinking it's the N.O.2 (get it? NO2 is nitous oxide ... yes lame) flash that's supposed to restore HP to racing specs. Heh heh.
Reply
Old May 13, 2005 | 08:11 PM
  #13  
BlueFrenzy's Avatar
Rotary Powered Decepticon
 
Joined: Aug 2004
Posts: 1,618
Likes: 1
From: Calgary, AB
So for those of you that HAVEN'T upgraded to the N flash (ssp61), North Hill FINALLY has their computers up and running again.

I got the upgrade today and according to my ***-dyno, it certainly does feel like there is a bit more "pull" at the lower RPMs (as many people have mentioned). Then again, it could be my ECU being reset and the swap to summer tires that made me think that the car feels different.
Reply
Old May 14, 2005 | 01:23 AM
  #14  
WarpFactor's Avatar
Registered
 
Joined: Sep 2004
Posts: 146
Likes: 0
From: Vancouver, B.C.
I had mine done about 2 weeks now. To be honest, I can't really tell any difference in power or in improved mileage as some people have mentioned. I think it did improve the 6000RPM power dip though.
FWIW.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
RevMeHarder
New Member Forum
8
Jun 1, 2026 02:30 PM
JimmyBlack
Series I Major Horsepower Upgrades
273
Feb 10, 2020 10:23 PM
tommy26Germany
Series I Trouble Shooting
11
Sep 29, 2015 10:33 AM
ErwinN
Series I Tech Garage
1
Sep 23, 2015 09:29 PM
Forevermore
Series I Trouble Shooting
6
Sep 20, 2015 01:04 PM



You have already rated this thread Rating: Thread Rating: 0 votes,  average.


All times are GMT -5. The time now is 09:39 AM.