I have a couple Greddy Turbo kits for the RX-8 on the way.

Checkout the specs here: http://www.rx8store.com/product.asp?0=666&1=668&3=363

If you have any questions please give me a call. We can also install these turbo kits.

Jason
www.rx8store.com

whats it cost to install?

Special install price of $600 and I would also throw in free dyno tuning.

Jason

Did hell just freeze over when I was not looking? What is this? We can actually place an order for forced induction? It has a really good price of $3,399? What is the timing on getting these? At that price I do not expect them to last long!

Is it for AT and MT??????

mmmm yah AT or MT :P

Did hell just freeze over when I was not looking? What is this? We can actually place an order for forced induction? It has a really good price of $3,399? What is the timing on getting these? At that price I do not expect them to last long!

I should have them next week. Greddy kit is a great price for everything you get.

Jason

Is it for AT and MT??????

I will try to get an answer today on that question. Greddy does not know since they have only tested it on the MT.

Jason

whoah! i dun wanna be a guinea pig, so who wants to be the first! for that price I think I could go ahead and void my warranty.

Good news. I got 2 of these kits in today and they are ready to ship. Whos first :)?

I was not able to get any info on how they work with the AT.

We are offering a great deal on the install. $400 and free dyno tuning.

Jason

If it were to be tested on the AT :P

hmm...if only we knew it it was compatible with the AT.

$400 for tuning/dyno testing where though?

Good news. I got 2 of these kits in today and they are ready to ship. Whos first :)?

I was not able to get any info on how they work with the AT.

We are offering a great deal on the install. $400 and free dyno tuning.

Jason

wow great deal..wish i wa sin ohio..or at least close to it:p

how long does the install and tuning take?? I might make the trip!!

I am guessing Ohio since thats what everyone keeps indicating...

dang it you are killing me. I have to think long and hard on this one, esp since I am local:-) just raise price so I wont have to think bout this:-)

What's the word on the CARB? My car is due this year for e-check. Are they going to have CARB by the end of 2005?

how long does the install and tuning take?? I might make the trip!!

Good question, we have not installed one yet. :)
If its anything like the RX-7 kits which Im sure it is, it will take all day. Dyno will take a couple of hours.

Jason

Good question, we have not installed one yet. :)
If its anything like the RX-7 kits which Im sure it is, it will take all day. Dyno will take a couple of hours.

Jason

I want this damn kit pick up your phone..............................


c'mon it is a tease. I need my dam kit
:eek:

Im back from lunch, call me :)

Jason

thanx for the hook up. l

Thanks for the order.

I have 1 left for sale.

Jason

I cant believe how many people are buying these. This is going to be awesome to hear the feedback.

I cant wait.

still no AT info???

I read in another thread that it's not available for the AT and GReddy has no plans in the future to make such a product.. sorry.

I guess apparently someone contacted GReddy themselves.

I have talked with 2 people at Greddy and both said they were unsure if it would work on the AT because it was only tested on the MT. I always take what Greddy says with a grain of salt because alot of those guys dont know much about their own product.

Jason

any idea if a TT will be coming along?

why would you want a tt? it would probable just be a parallel set up...which would just make the kit a lot more money over a single in our car (since it isn't running a lot of boost...we can get by on a fast spooling smaller turbo=less lag). now if it was sequencial..that would be sweet...but greddy wouldn't make one of those. just my 2 cents

I think someonecould probably figure out a way toget it to work on the automatic Rx8 but not w/o destroying the tranny shortly after

the instructions say that it won't work for the AT

ahh good thing i'm not one of the 1 out of 10 rx-8's that's a auto:p hehehehehe

Got to go with army RX8 here. There is no need for a twin turbo setup for this car if the fuel system limitations are as advertised. Right now people are petering out at around 60-70 hp increases as the returnless fuel line/system is the limitation. A single turbo system can easily give you that kind of increase. The only thing a twin turbo setup would do is add complexity, increase cost to install, and add weight.

True twin turbo setups are even rare for the RX-7 because they are so expensive and dont give anymore HP than one large single. Im sure you can squeeze more HP out of the Greddy kit with some good tuning.

Jason

the last gen rx-7's (sold in the us) twin turbo set up was only good for agout 350ish whp..they were great for cutting down on the turbo lag....but they had so many damn hoses that they had a horrible rep for failing. most every rx-7 i've seen (series 6-8) has had their stock sequential turbo's taken out and a single in it's place.:D

I think someonecould probably figure out a way toget it to work on the automatic Rx8 but not w/o destroying the tranny shortly after

I am sure the kit will fit. Also the valve body will be fine at low boost. anything over 10 psi would probally start to shift funky. As far as the kit goes it will work with no problem just have someone re-tune the e-manage.
:D

-Ryan

Why did the price change from $3399 to $3695??

I raised the pricing due to some complaints from Greddy. You will see some shops have raised their pricing. If anyone is interested in the kit please call me and we can discuss pricing over the phone.

Thanks
Jason

Any idea on what the increase in torque is with this kit?

jason, if you want ill take one for the team and let my car be the guinnea pig on this one if you want to give me a free turbo kit ;) see if you can get greddys backing!

jason, if you want ill take one for the team and let my car be the guinnea pig on this one if you want to give me a free turbo kit ;) see if you can get greddys backing!

Youshould read other sections of the forum. Sorry to tellyou but someone already beat you to the punch. (http://www.rx8club.com/showthread.php?t=49150)

I raised the pricing due to some complaints from Greddy. You will see some shops have raised their pricing. If anyone is interested in the kit please call me and we can discuss pricing over the phone.

Thanks
Jason

Guess I got lucky getting mine from another vendor for $3290 ;)

Now look at their price :) and you should thank me for the price you got or you would have paid alot more.

If anyone wants a kit let me know, Im more than willing to discuss pricing.

Jason

Yeah, I know.. did GReddy threaten to cut you off from the supply if you guys kept the pricing so low?

I dont think they would cut us off, but probably wouldnt offer any support.

Jason