GROUP BUY: GIRODISC 2 PIECE FLOATING FRONT ROTORS F&R NOW AVAILABLE FOR MANUFACTURING - we need 5 people to make this happen!!!



THIS IS OFFICIAL AND THROUGH THMOTORSPORTS ONLY!!!



SPECIAL PRICING for RX8club members only!

LIGHTER, STRONGER, AND VERY SEXY!!!

ONE OF THE BEST ROTORS OUT RIGHT NOW!!! THIS IS WHAT WE RUN ON OUR 04 STI TIME ATTACK CAR / PRO TRACK CHALLENGE 2011 and what I will be running on my SM2/SSM RX8 as well.


http://i87.photobucket.com/albums/k133/mx5adam/ontracksti.jpg

TRUE FLOATING SLOTTED ROTORS THAT EXPAND AND CONTRACT AND KEEP YOUR ROTORS STRAIGHT!!! - unlike many others who say they are 2 piece floating ex: DBA 5000


http://i346.photobucket.com/albums/p437/girodisc/track-2pc-r-rotor.jpg

http://i87.photobucket.com/albums/k133/mx5adam/350z-2pc-front-01Small.jpg

http://i87.photobucket.com/albums/k133/mx5adam/350z-2pc-front-03Small.jpg

http://i87.photobucket.com/albums/k133/mx5adam/350z-2pc-front-02Small.jpg

http://i87.photobucket.com/albums/k133/mx5adam/350z-2pc-front-04Small.jpg

http://i87.photobucket.com/albums/k133/mx5adam/350z-2pc-rear-01Small.jpg

http://i87.photobucket.com/albums/k133/mx5adam/350z-2pc-rear-02Small.jpg

These are very popular among the Lambo, Porsche, BMW and Ferrari enthusiasts


*fully floating 2pc

*made from a ductile iron

*directional vane slotted

*long lasting life

*fronts are 5.5lbs lighter than OEM (per rotor)

*rears are 4.5lbs lighter than OEM (per rotor)

*very economical when it comes to future replacement

*OEM size

*for the GT trim RX-8 ONLY (rear rotors are all the same though)




GB PRICE FOR FRONT PAIR ONLY: $570 SHIPPED!!!
Normal price after the GB: $700 SHIPPED



GB PRICE REAR ONLY: $610 SHIPPED!!!
Normal price after the GB: 750 SHIPPED



GB PRICE FOR FRONT AND REAR PAIR: 1170 SHIPPED!!!
Normal price after the GB: 1450 SHIPPED


GB LIST / VERY INTERESTED AND WANT OTHERS TO JOIN!!!:

1. bse50
2. vcoil
3. Adam@THMotorsports
4.
5.
6.
7.
8.
9.
10.



We need 5 people to join up and pay to make this happen...let me know about any questions...hope it all makes sense.











http://www.k20a.org/ads/adimage.php?filename=banner2rev.gif&contenttype=gif (http://thmotorsports.com)

FRONTS on our STi close up

http://i87.photobucket.com/albums/k133/mx5adam/Sti%20Parts%20n%20Stuff/DSC03772.jpg

http://i87.photobucket.com/albums/k133/mx5adam/Sti%20Parts%20n%20Stuff/DSC03771.jpg

http://i87.photobucket.com/albums/k133/mx5adam/Sti%20Parts%20n%20Stuff/DSC03780.jpg

http://i87.photobucket.com/albums/k133/mx5adam/Sti%20Parts%20n%20Stuff/DSC03767.jpg


REARS:

http://i87.photobucket.com/albums/k133/mx5adam/Sti%20Parts%20n%20Stuff/DSC03777.jpg

http://i87.photobucket.com/albums/k133/mx5adam/Sti%20Parts%20n%20Stuff/DSC03766.jpg

http://i87.photobucket.com/albums/k133/mx5adam/Sti%20Parts%20n%20Stuff/DSC03779.jpg



5 autox's and 6 track days and counting....we are using Carbotech XP10 F&R



Let me know guys.

-Adam@THM

Custom colors:

http://i346.photobucket.com/albums/p437/girodisc/AkumaRotors.jpg


http://i346.photobucket.com/albums/p437/girodisc/LamboFrontRotors.jpg




-Adam

Sorry guys no idea why the links are broken....damn photo bucket...hopefully it gets fixed soon.


-Adam

Ok looks like all links are working. Thanks people at photobucket.

LMK guys!!!

do they come in the pink/pur like the evo? and do they fit with stock cails?

is there an option for blank rotors

do they come in the pink/pur like the evo? and do they fit with stock cails?

colors are completely customizable...there is a cost though.

The first few pics show the normal color.

is there an option for blank rotors

Yes I can have that happen instead of having them being slotted. But there is no cost difference I'm afraid.


-Adam@THM

We have to buy caliper for then or not very nice

We have to buy caliper for then or not very nice

No these are direct fit. OEM dimensions. Fronts will work with the GT RX8's only....rears all the same.

LMK guys


-Adam

Pretty with a legit drop in unsprung mass. Were I not so poor... Dunno why more aren't interested.

FYI, only series I base autos have the smaller front rotors. All manuals and any auto with sport trim or higher have 12.7" front rotors. I think all S2s have them.

Pretty with a legit drop in unsprung mass. Were I not so poor... Dunno why more aren't interested.

FYI, only series I base autos have the smaller front rotors. All manuals and any auto with sport trim or higher have 12.7" front rotors. I think all S2s have them.

Yeah these are pretty awesome. I guess people arent ready for this yet.


-Adam

Still doing this, has anyone signed up for this? Doesn't look like it. I'm shopping for slotted rotors...

Still doing this, has anyone signed up for this? Doesn't look like it. I'm shopping for slotted rotors...

well i tried to do this...but no one wants to go for it. Too much performance ;)

I can get you single piece stoptech slotted rotors...LMK if anything


-Adam

looking for two piece slotted...

looking for two piece slotted...

best would be the GiroDisc...since its an actual floating rotor.

Next best thing would be the DBA 5000 series.

http://d5otzd52uv6zz.cloudfront.net/g-3e00ffb2-80d4-400b-943d-d429135d73ff-420.jpg


I can do $675 for the front pair for ya!!!

LMK


-Adam

How do these compare with the DBA5000 rotors?

Looks like these GiroDisk rotors are straight vane?

Also, how much are the replacement rotors?

I wish this was around 3 years ago.

How do these compare with the DBA5000 rotors?

Looks like these GiroDisk rotors are straight vane?

Also, how much are the replacement rotors?

GiroDisc are more motorsports oriented, and are a true floating design....they have room to contract and expand without putting stress on the hat or rotor.


DBA have kangaroo paw inside...

pic explains

http://t0.gstatic.com/images?q=tbn:ANd9GcRrWgVQAcvOGYAKit9tPGCEBxt13IIhg BEu22yo74jd9ikXWihFRA


I found that the girodisc are much tougher and replacement parts are much easier to attain...

~ 300-350 per axle for replacement rings with all hardware for girodisc.

I wish this was around 3 years ago.

yup...

After doing some quick research, I think I'm pretty set on these rotors...
They do look like true 2pc floating rotors (looked into DBA5000 only to find they were not which was surprising to me). Also, looks like GiroDisk has curved vanes. :icon_tup:

But first! I would need an RX8. :p:

How much would the the shipping be to Canada?

After doing some quick research, I think I'm pretty set on these rotors...
They do look like true 2pc floating rotors (looked into DBA5000 only to find they were not which was surprising to me). Also, looks like GiroDisk has curved vanes. :icon_tup:

But first! I would need an RX8. :p:

How much would the the shipping be to Canada?

Lol...do you need a shipping quote on the rx8? haha...

prices are above...shipping to Canada will be in the 100-125 range


yes these are killer rotors!!!



-Adam

do it ;)

still available? need new rotors soon, the centrics wore out like butter lol

still available? need new rotors soon, the centrics wore out like butter lol

120 series or 121 series centrics? there is a big difference.

These would only be available if we can get 5+ people.


-Adam

I tried them on a 360 modena right after the install.
Awesome discs, if anybody is dubious... just buy them.

Oh yea ;)

are these offered for Stock FD RX-7 ?

are these offered for Stock FD RX-7 ?

yup I can do STANCE coilovers for applications they offer. We are the midwest distributor of them.

PMd ya!

are these offered for Stock FD RX-7 ?

ooops...you mean the girodisc obviously....lol.

ignore that PM than ;)


we can have these made...would need 5 orders to do so though.



-Adam

If only money grew on trees... College = Broke :(

The front kit, does it fit in the EUDM 192 hp model?

If only money grew on trees... College = Broke :(

Indeed...lol

The front kit, does it fit in the EUDM 192 hp model?

These are intended for the GT trim RX8's. And I might be wrong but in JAP and EUR it should be a Type S??

-Adam

Indeed...lol
These are intended for the GT trim RX8's. And I might be wrong but in JAP and EUR it should be a Type S??

-Adam

Eudm markets have even different trim names. Type S doesn't really apply.
To make everything clear you could state that it will fit any rx8 that was originally sold without the possibility to install 16" wheels :)

Many many low and high power engine cars (auto\5sp manual and 6sp) share the "GT" trim of our american counterparts... making everything hard to identify at times!

However i'm the other guy interested with vcoil's purchase. F\R set.

Cheers!

G

Eudm markets have even different trim names. Type S doesn't really apply.
To make everything clear you could state that it will fit any rx8 that was originally sold without the possibility to install 16" wheels :)

Many many low and high power engine cars (auto\5sp manual and 6sp) share the "GT" trim of our american counterparts... making everything hard to identify at times!

However i'm the other guy interested with vcoil's purchase. F\R set.

Cheers!

G

Gotcha...well here in the US the GT versions also get the bigger front brakes...as far as the rest of the trim I am not sure...I can get you the USDM GT OE rotor dimensions...LMK

Gt oe dimensions are perfect, 12.something inches right?

Gt oe dimensions are perfect, 12.something inches right?

Here are both the GT and non GT front rotors...OE sizes. The Girodisc will be the same as the GT OE size.

GT/sport suspension:
http://genesis.centricparts.com/images/pics/12045071.jpg


Normal suspension/non GT
http://genesis.centricparts.com/images/pics/12045070.jpg

Just for completeness, what are the rear rotor dimensions?

Bye

Just for completeness, what are the rear rotor dimensions?

Bye

Its just one rotor for all RX8's for the rears...no matter if its GT or not.

Enjoy... :yumyum:

http://genesis.centricparts.com/images/pics/12045072.jpg

Can't you force 2 other people to join? I want these already!

Can't you force 2 other people to join? I want these already!

I will redo/renegotiate the pricing to make it more attractive. Probably take out the FREE stuff and just make it more simple.

Maybe we can get people on this that way

Brakes don't bling, damn ricers!

interested in a pair of fronts for now, lemme know how it goes

I will redo/renegotiate the pricing to make it more attractive. Probably take out the FREE stuff and just make it more simple.

Maybe we can get people on this that way

Interested in a rear pair, pending a price change w/o free stuff lol
I currently have a Racing Brake BBK up front. Any idea how these compare?

interested in a pair of fronts for now, lemme know how it goes



Interested in a rear pair, pending a price change w/o free stuff lol
I currently have a Racing Brake BBK up front. Any idea how these compare?

What are you looking to compare? Braking power will still be determined by the pad you are using...rotational mass/weight will be saved with the girodisc for sure.. and they are intended to be very tough.

But these are OEM size so no BBK style big rotors. LMK if you had more specific questions.




GB PRICE FOR FRONT PAIR ONLY: $570 SHIPPED!!!
Normal price after the GB: $700 SHIPPED



GB PRICE REAR ONLY: $610 SHIPPED!!!
Normal price after the GB: 750 SHIPPED



GB PRICE FOR FRONT AND REAR PAIR: 1170 SHIPPED!!!
Normal price after the GB: 1450 SHIPPED

Just a question raised from a French guy:
what happens if I need spear parts? (rotors, hardware, rotor hat, etc.).

They'll be available or need to be ordered with a new GB because of quantity?

Thanking you in advance

Just a question raised from a French guy:
what happens if I need spear parts? (rotors, hardware, rotor hat, etc.).

They'll be available or need to be ordered with a new GB because of quantity?

Thanking you in advance

I will take care of my customers at cost when the time comes. It will depend on what is needed...but buying new rings will be less than buying a new kit.

Any Girodisc's advice from Girodisc about pads for street, ligth track days, and race use?

Thanking you in advance

Regards

P.S. In fact people who evaluate the buy also think to a complete kit swap and ask questions about the ability of the oem front calipers to develop all the power from this rotors.

Any Girodisc's advice from Girodisc about pads for street, ligth track days, and race use?

Thanking you in advance

Regards

P.S. In fact people who evaluate the buy also think to a complete kit swap and ask questions about the ability of the oem front calipers to develop all the power from this rotors.

We have been very successful with running Carbotech race pads with these. Very good combination as far as longevity and performance.

I think the OEM calipers are very good...the whole hydraulic system in the RX8 is much better than most other cars in the market...including the STi, which we road race. Its very well balanced, and with the proper pads, fluid and rotor for your situation, you should have zero worries about your brakes. Unlike the Subarus and 350Z's....not sure on evos.

Bump Adam..
Price shipped to sweden? we have another potential customer... or 2 there :)

Bump Adam..
Price shipped to sweden? we have another potential customer... or 2 there :)

NICE!!! Have him email me to adamk@thmotorsports.com with his full shipping address....I will get a quote.


-Adam

NICE!!! Have him email me to adamk@thmotorsports.com with his full shipping address....I will get a quote.


-Adam

done ;)

Im the potential buyer :)

Quote all four disc of course

I'm sure lennart wants'em too...

He is running BBK Rotera

Bump! Adam send fastlane the infos he requested and we're all ready to go!

Bump! Adam send fastlane the infos he requested and we're all ready to go!

I am waiting on some more quotes from my freight forwarder...4 separate USPS packages is not pretty as far as $$$$


-Adam

3 parcells i guess...
Vcoil and I will use the same address :)

Bump! Adam did you reply to Ingemar's inquiry?

How quickly can these be ready? I'm thinking about getting a set.

How quickly can these be ready? I'm thinking about getting a set.

1-2 weeks till they ship once we submit the order. Unless special powedercoating is needed.


-Adam

1-2 weeks till they ship once we submit the order. Unless special powedercoating is needed.


-Adam

Any idea when the order will be submitted? I'd like to get my hands on them pretty soon as my rotors are pretty destroyed.

Any idea when the order will be submitted? I'd like to get my hands on them pretty soon as my rotors are pretty destroyed.

Well so far we have about 2-3 people only interested. I have no one actually pulling the trigger.

We need 5 orders...

once submitted it will take about 5 days to have them made.

from there shipping can begin after all of them arrive at THMotorsports which will take about 3-4 days to arrive.

SO shipping can begin as fast as roughly 2 weeks.

I cant order them in before all orders are placed.

If someone wants single piece rotors or anything like DBA 5000 series just let me know and I can work with them.




Adam@THM

Davide and I are waiting cash in hand for this to happen. Ingemar is waiting for that size answer i guess.

We don't have problems paying but we'd rather do it when we're sure that it's going to happen soon given where we live :)

Davide and I are waiting cash in hand for this to happen. Ingemar is waiting for that size answer i guess.

We don't have problems paying but we'd rather do it when we're sure that it's going to happen soon given where we live :)

Yup I answered Ingemar today with all his questions. Not sure why I havent already.

Basically in a nutshell if the OEM rotor will fit it the GiroDisc rotor (since its OEM dimensions) will fit as well.


If you guys put the money up others will follow. If nothing is happening I can always refund you guys. We will do this via Paypal as well so that it can all be secure and easy, and refunds are a breeze.

I need to get 1 address for you guys for a freight package...it will be easier shipping wise.


-Adam

Let me tell vcoil\davide about this and i guess i'll do a bank transfer to him :)

So if I were to sign on, you would STILL need to find one more buyer before this is a go?

Well so far we have about 2-3 people only interested. I have no one actually pulling the trigger.

We need 5 orders...

once submitted it will take about 5 days to have them made.

from there shipping can begin after all of them arrive at THMotorsports which will take about 3-4 days to arrive.

SO shipping can begin as fast as roughly 2 weeks.

I cant order them in before all orders are placed.

If someone wants single piece rotors or anything like DBA 5000 series just let me know and I can work with them.




Adam@THM

It would be Thm, vcoil, fastlane, me and you. 5! Bingo!

It would be Thm, vcoil, fastlane, me and you. 5! Bingo!

Alright let's do this. I want both the front and rears. Can you ship them out by the end of October though? I desperately need new rotors and am on a pretty tight time schedule for my next trackday.

Alright let's do this. I want both the front and rears. Can you ship them out by the end of October though? I desperately need new rotors and am on a pretty tight time schedule for my next trackday.

So is everyone doing Front AND Rear???

Also if anyone wants to do pads speak now. I can give you guys very good discounts.

We do HAWK, Carbotech, Cobalt Friction for race pads. As well as almost any street pad you will need.

Looking forward in hearing from you.

Thank you,


Adam K
THMotorsports
800-959-0145 ex2
www.thmotorsports.com
adamk@thmotorsports.com
AIM = adamkthm

pm for price of front and rears + full set of carbotech xp8 pads plz

pm for price of front and rears + full set of carbotech xp8 pads plz

Prices on the rotors are in the first post, ADD $274.50 SHIPPED for F&R Carbotech XP8.

I like to run XP12 front and XP8 rear.

Ok im ready to buy.. I want both front and rear slotted not drilled if you can get hawk dtc60 ill take two sets of them also. Would like à price quote shipped to sweden :)

Ok im ready to buy.. I want both front and rear slotted not drilled if you can get hawk dtc60 ill take two sets of them also. Would like à price quote shipped to sweden :)

I just shipped out an STi set internationally to Canada via USPS and it cost $180. To Sweden I am seeing 250-300 range.

So there are potentially 2 sets that will go to Sweden. I can perhaps do freight and ship all together. Is that possible?

Maybe if you guys can get me a single address I will try to get more quotes...but I have not shipped rotors there before.

Crap!!! Why couldn't you do this in like 6 months, I have a turbo to finish building dangit!

What's the latest on this group buy? Are you ready to take orders?

What's the latest on this group buy? Are you ready to take orders?

+1!
i'm down... Lemme know how this goes liOn and contact me when its time to order.

Be nice to run these on BW

I guess that Adam should start collecting money, it looks like we reached the right number of interested people.

I'm sure that you guys won't mind if your european counterparts pay last, just to be sure that the group buy follows through and we don't have to waste time and money with paypal's awesome refunds :(

I guess that Adam should start collecting money, it looks like we reached the right number of interested people.

I'm sure that you guys won't mind if your european counterparts pay last, just to be sure that the group buy follows through and we don't have to waste time and money with paypal's awesome refunds :(

I am ready to take your hard earned money and give you some metal! haha!

I already spoke to girodisc about this and they are excited!

Lets put in the order ASAP!

If you guys can update the list with your names that would be perfect. And than I will PM everyone on that list with direction for payment.

GB LIST FRONT AND REAR ROTORS


1. bse50
2. vcoil
3. Adam@THMotorsports
4.
5.
6.
7.
8.

1. bse50
2. vcoil
3. Adam@THMotorsports
4. Fastlaneracing
5.
6.
7.
8.

1. bse50
2. vcoil
3. Adam@THMotorsports
4. Fastlaneracing
5.
6.
7.
8.


Keep that list populated and at the end of the day I will PM those who are on it...if you don't post doesn't mean you are missing out or anything...but this is the best way to get started.

ALSO

PLEASE CHECK OUT and LIKE my boys @ GIRODISC!

http://www.facebook.com/pages/Girodisc/65136166387



-Adam

1. bse50
2. vcoil
3. Adam@THMotorsports
4. Fastlaneracing
5. LionZoo (F+R blank rotors and XP8 pads)
6. c0ldf1ame
7.
8.

1. bse50
2. vcoil
3. Adam@THMotorsports
4. Fastlaneracing
5. LionZoo (F+R blank rotors and XP8 pads)
6. c0ldf1ame (front only blank rotors, xp8 pads)
7.
8.

LionZoo - Do you want XP8 pads F&R?

BTW to my European guys.

the cheapest shipping method will be the USPS (postal service)

Front pair is $150 to ship

Rear pair is $100 to ship

60-70 lbs is the limit. So i have to ship these in pairs. Cannot ship in a set.

GiroDisc has shipped them to Europe before many times and they charge those rates. So we will do the same.

All quotes i received from freight companies were much higher.

Hope this helps.



-Adam

LionZoo - Do you want XP8 pads F&R?

Yes front and rear pads. I think c0ldf1ame wants a set of front and rear pads too.

1. bse50
2. vcoil
3. Adam@THMotorsports
4. Fastlaneracing
5. LionZoo (F+R blank rotors and XP8 pads)
6. c0ldf1ame (front only blank rotors, xp8 pads)
7.
8.



Looks like the list is populating nicely.

I will wait for a few stragglers to come through throughout the weekend.

Will send out all the PMs Monday.

Have a great weekends and happy Halloween!!!



Thank you,


Adam K
THMotorsports
800-959-0145 ex2
www.thmotorsports.com
adamk@thmotorsports.com
AIM = adamkthm

[QUOTE=c0ldf1ame;4112513]1. bse50
2. vcoil
3. Adam@THMotorsports
4. Fastlaneracing
5. LionZoo (F+R blank rotors and XP8 pads)
6. c0ldf1ame (front only blank rotors, xp8 pads)
7. Trochoidmagic (fr/rr blanks)
8.
9.
10.

[QUOTE=c0ldf1ame;4112513]1. bse50
2. vcoil
3. Adam@THMotorsports
4. Fastlaneracing
5. LionZoo (F+R blank rotors and XP8 pads)
6. c0ldf1ame (front only blank rotors, xp8 pads)
7. Trochoidmagic (fr/rr blanks)
8.
9.
10.

Ok sounds good...so we got a good number to do this.

PMs will be sent today with further instructions

thank you guys!

Sending PMs now!!!

pm sent adam.
i'm hoping this will go smoothly seeing as there are a few that are ready to order front and rear sets. lemme know when you're ready for me adam when you get my pm.

do we still get free gifts? halloween bonus treats? :)

pm sent adam.
i'm hoping this will go smoothly seeing as there are a few that are ready to order front and rear sets. lemme know when you're ready for me adam when you get my pm.

do we still get free gifts? halloween bonus treats? :)

Thank you sir!

I will be charging your CC tomorrow as instructed.

Also paypal payment request sent to 2 othres


Keep me posted guys.

I want to make this as fast as possible for you guys


call me if anything

-Adam

Pm sent!

Respondign to all PMs


sorry guys we have been short staffed and MAD SLAMMED with work.


BTW:

If you want these I can make it happen @ $277 SHIPPED F&R for those who are involved with the GB.

HB378G.565 Disc Brake Pad; DTC-60 w/0.565 Thickness; Rear;
HB470G.643 Disc Brake Pad; DTC-60 w/0.643 Thickness; Front;



-Adam

payment sent, from both lionzoo and i

thanks

I'm just waiting for my bank transfer to clear on vcoil's account :)

payment sent, from both lionzoo and i

thanks

GOT IT!!!

thank you guys!


So we have 3 people payed up so far.


I'm just waiting for my bank transfer to clear on vcoil's account :)

SWEET!!!

Give us your monies!!! :evil_laug


-Adam

Yeah!
vcoil is still waiting for your reply concerning a set of endlinks to know how much he'll have to pay :)

PMs sent!

Thank you for the payments guys. We are almost ready for me to pay the bill to GiroDisc.

-Adam

PMs sent!

Thank you for the payments guys. We are almost ready for me to pay the bill to GiroDisc.

-Adam

If you can get Girodisc to ship directly to those of us on the West Coast, it would be much appreciated. Also, if the pads can be shipped ASAP that would be great as well. I'm running out of brakes.

Adam is very professional and a pleasure to work with over the phone for those who has a few q's.

If not just for just the kick ass product, do it for the excellent customer service!

Highly recommended GB :)

Payed

Adam, to pay I'm waiting for info from you about Whiteline

When Will the discs ship out?

Payed

Thank you!!!

Adam is very professional and a pleasure to work with over the phone for those who has a few q's.

If not just for just the kick ass product, do it for the excellent customer service!

Highly recommended GB :)

Thank you Richard!!!

Adam, to pay I'm waiting for info from you about Whiteline

I got more info...and will PM you ASAP!



When Will the discs ship out?

Been talking to GiroDisc and they are still working on them...I will post up more solid information shortly, as I get it. And I will also email everyone that paid with an official invoice as soon as I can.

Once they ship we will email all tracking information.

I will send you a pm tomorrow with some nice invoice infos for the european members :)

Any update on the order status?

Ok guys I have combinations of good and bad news...but most are pretty good.


First off all orders were submitted and the hats are being machined. Everyone will be finally receiving their official invoice emailed to them with a PDF attachment today. And those who are still perhaps going to join its still not too late.




Bad news is that it may take longer for these to be made than originally anticipated. Sorry TrochoidMagic....I know you were itching to be at a track day with these puppies in 2 weeks. But its still uncertain when we will be getting them out in 100% ready form. But due to how close you are to GiroDisc you will still be the first one with them. If I can get an exact ETA I will definitely post that up.

The reason for this is because GiroDisc will want to make sure that there will be ZERO fitment or any issues what so ever. We want to ensure it is beyond perfect. I will even be sending in my hubs, spindles, calipers and anything else brake related/needed from my RX8 for Martin @ Girodisc to look at if needed.



If anyone has any questions directly to Martin @ GiroDisc who is now in charge of making this happen, feel free to contact him next week, and he will have all of you guys info so he will know who you are. More bad news is that my original friend over there Johann, who this was started with, is no longer going to be working there, so this is why Martin is now taking over. BTW Martin is the owner of GiroDisc so we are all in great hands.

http://www.girodisc.com/Contact-Us_ep_5.html

or feel free to message me as well if anything.

SO overall we are on a good track and things are coming together. But we all need to be patient with this. GiroDisc has never let us down, and I trust those guys all the way.

I will post up more news and any pics as we move forward.


-Adam

good! Time to start drooling on more girodisc brake pics :)

No problems here.. my season is over anyway (snow will soon fall here) so there is NO rush for me.

Make them top notch =)

Ingemar... how can they make them even better than this? :)
http://i132.photobucket.com/albums/q18/jid2/102_0904.jpg

We are a bunch of lucky bastards.

That will be hard, but stressing stuff is never good, take your time and make them as good as in the pictures =)

That will be hard, but stressing stuff is never good, take your time and make them as good as in the pictures =)

Haha! They will be Epic! I am very excited. We will be an exclusive bunch...but we are also paving the way for a possibility for others to get these as well...but for a higher cost though.

Little teaser pic from our 996 Turbo equipped with GiroDisc rotors:

http://i87.photobucket.com/albums/k133/mx5adam/2011-11-15_15-00-13_556.jpg

Aww thats beutifull

paid for rears also

So how is it going?

Things are good....but I need to confirm a few things with you guys.

A few people wanted the rotors as a BLANK...meaning non slotted.

You should all have official invoices now. Using the invoice number can you please email me to adamk@thmotorsports.com if you needed a blank or slotted version.

I just want to double check to make sure you will get the correct one you wanted.

thank you!


-Adam

No invoice here, send it to My fastlaneracing.se adress.

I wanted slotted

email sent, lionzoo and i are definitely for blanks, thnx

No invoice here, send it to My fastlaneracing.se adress.

I wanted slotted

I believe your invoice was sent to the email from the paypal payment....can you please check with the paypal email?

email sent, lionzoo and i are definitely for blanks, thnx

Got your email...thank you!

I just really need to know who needed the blanks. Slotted is default.

Please email me with your info and I will update.

-Adam

Email sent for blank front and rear disc set

No invoice yet.
Email sent for blank discs, lemme know if u got it

I believe your invoice was sent to the email from the paypal payment....can you please check with the paypal email?


Thats an old email i have lost My password to, rarely uses paypal so i forgot to update sorry for that. Can you forward to My other mail? You have it in your mailbox

Thats an old email i have lost My password to, rarely uses paypal so i forgot to update sorry for that. Can you forward to My other mail? You have it in your mailbox

no worries man...got it. Figured that out by your 3rd email...I resent it.

No invoice yet.
Email sent for blank discs, lemme know if u got it

Got it...you should have gotten an email from me...i will recheck...


Edit: I am resending your email to your screen name at yahoo dot com


-Adam

Bumpity bump, sweet updates? :)

Bumpity bump, sweet updates? :)

Talked to Martin at Girodisc. He is waiting to do some testing very shortly. He is a busy man there so I will bug him again end of the week to see where he is at with them.

-Adam

I've been waiting so long for these to come that I'm almost at the backing plates of my pads. Girodisc might be taking their time, but I'd appreciate it if you can ship the pads that we ordered first. Thanks.

On My invoice My hawk pads where missing, please check they wont be missed in shiping :)

I've been waiting so long for these to come that I'm almost at the backing plates of my pads. Girodisc might be taking their time, but I'd appreciate it if you can ship the pads that we ordered first. Thanks.

your pads are on the way...shipping was confused since it looked like a double order...sorry on delay.

On My invoice My hawk pads where missing, please check they wont be missed in shiping :)

email me about it and I will look that up for you and check up on it. Put in your name and any info i will need.

thank you

Haven't received my invoice?

how is it going? are we seeing our nice brakes (and pads for some) to christmass?

Haven't received my invoice?

email me with your first and last name and I will look into it. Perhpaps I butchered your email address.

email is adamk@thmotorsports.com

thanks

how is it going? are we seeing our nice brakes (and pads for some) to christmass?

Its going good. Martin updated me that he has a new model and is going to be using the CAD drawings with the new updates.

So yeah it is taking a bit longer, but this is better than seeing there is not enough clearance on the hat from the caliper cage. These could have been released already I bet but the clearance would be too tight that if some crap (rocks, heavy dirt, track crap) would fall in of some sort between these they would cause some major issues.

Once I get more news I will post up.


-Adam

A no worries, clearance is mutch mutch importent. take your time =)

brake pads came in today, thanks! now just waiting for these sweet rotors :naughty:

^^ same here...
How's track?

didnt go cuz theres too much to do on the car to get it prepared

Lets go nxt yr ;)
After we get our girodisc!
If u wanna burn up my oem's, lemme know. No room to stock 2 sets after i have girodisc...

any updates?

Sorry guys, been way too busy this past week... haven't had time to get updates. I will ask to see where we are with this.

-Adam

can you send me a quote to 07631, or how this would work

can you send me a quote to 07631, or how this would work

Hey,

Not sure what details to send you that is not already discussed in the thread. Check the first post for pricing and details. Call me when you are ready and we can make it happen. OR...simply PM me when you are ready.


-Adam

Got some awesome updates for you guys coming soon.

All designs and testing are completed. Raw material is on the way.

3D diagrams to show these bad boys soon!!!



Happy Holidays guys!!!


-Adam

w00t can't wait =)

Yes, yes, yes!!!

Woohoo

sorry guys...still waiting on those 3D renderings so that I can put them up.

The hats are being machined....but here is the newest CAD rendering that I was forwarded.

http://i87.photobucket.com/albums/k133/mx5adam/B1-1163D-1.jpg

Better than pay per view pornography! :)

Better than pay per view pornography! :)

LOL....I will try to get more soon. The cutting process is about to begin. There was a delay on raw materials.

I know its hard but any guessimate ETA?

Ok more photos While we Wait?

yes please...

*sigh*
the wait is killing me

Me too,
but I'm lucky(??) 'cause here winter are a really a mess, so the car sleeps in the garage.

Me too,
but I'm lucky(??) 'cause here winter are a really a mess, so the car sleeps in the garage.

I hear ya. Trans is very sloppy in weather 60 degree and under!

I will look to get some updates soon...Its been too long.

Also for those looking for more killer deals check out this thread. I am getting some ridiculous deals on 2 way Carbonetic diffs.

http://www.rx8club.com/showthread.php?t=227743

i hate you!

I will look to get some updates soon...Its been too long.

Also for those looking for more killer deals check out this thread. I am getting some ridiculous deals on 2 way Carbonetic diffs.

http://www.rx8club.com/showthread.php?t=227743

No 1,5 way? 2 way is more for drifting purpose?

No 1,5 way? 2 way is more for drifting purpose?

Not with carbonetic. I have used these first hand. These are definitely a smooth lock transition. Very stable.

I can get you 1.5 way if you want. LMK

i hate you!

LOL....so does my wife...haha. Too much car stuff.

GiroDisc is simply waiting for some raw material to come in. Due to all the weather things are delayed up there in Washington. Machines are ready. Rotors should be popping out in ready to ship condition next week. I will post up pics of the process once I get them.

I will have 3 extra sets BTW.


-Adam

Weekly bump! =)

Any Progress?

Girodisc says they'll end up looking like this, only in the shape of a brake disc:
http://2.bp.blogspot.com/_kLwHEdH3a1A/TBwpgq2ROBI/AAAAAAAAAc0/N7jV6-iFLBw/s1600/hot+lady+mary+castro+1.jpg

Weekly bump! =)

Any Progress?

I will bug them tomorrow. I know he will get me some pics of the machining. Its like knowing you will be a dad and getting to see the ultrasound of your not fully made children....lol.

I will ask and update ASAP!

Girodisc says they'll end up looking like this, only in the shape of a brake disc:
http://2.bp.blogspot.com/_kLwHEdH3a1A/TBwpgq2ROBI/AAAAAAAAAc0/N7jV6-iFLBw/s1600/hot+lady+mary+castro+1.jpg

Ummm...yes....exactly actually. But x4 since there are 4 rotors.

Any news, photos (Giorgio please abstain you :) ), I'm just driving crazy.
If this wait doesn't stop I need to compensate with a set of whiteline klc045 and klc046 endlinks plus a front struts bar in the meantime.

Any news, photos (Giorgio please abstain you :) ), I'm just driving crazy.
If this wait doesn't stop I need to compensate with a set of whiteline klc045 and klc046 endlinks plus a front struts bar in the meantime.

Still nothing on those endlings...no idea what is going on as far as availability.

Waiting on pics from GiroDisc so that I can upload them for you guys. + updates

-Adam

Can you get an ETA from them?

After months an ETA would be welcome!

Yes its time for an ETA. =)

Yes its time for an ETA. =)

After months an ETA would be welcome!

Can you get an ETA from them?

This was yesterday:

girodisc martin: material just arrived for the hats so they are being programmed. Rotors are supposed to get here from the foundry on Friday or Monday. The chips will fly next week and I'll have some good stuff for you. Thanks for your patience.





Some delays, and they do a lot for how small they are. We are getting close boys!!!

Happy Friday everyone!!!


-Adam

Awesome news!
At least for the european crowd the delay was not a real issue, sweden and luxembourg are extremely... icy and I can't drive at the moment so we were lucky we paid them with a weaker dollar back in the day!

This isn't anything against you Adam since we know you don't have control over manufacturing, but...

LOL....I will try to get more soon. The cutting process is about to begin. There was a delay on raw materials.

This was yesterday:

girodisc martin: material just arrived for the hats so they are being programmed. Rotors are supposed to get here from the foundry on Friday or Monday. The chips will fly next week and I'll have some good stuff for you. Thanks for your patience.

So on 1/11, they reported that the cutting process was about to begin. Now, almost a month later they just reported getting some materials and are about to begin manufacturing. Basically, there was no progress for a month.

I just hope they'll provide spare parts (i.e. rotors) quickly/immediately in the future because if not actually this will be a not so good deal.
I hope they planned at least a 5 years support for spares.
Sorry but presently some doubt is raising...

Bye

This isn't anything against you Adam since we know you don't have control over manufacturing, but...


So on 1/11, they reported that the cutting process was about to begin. Now, almost a month later they just reported getting some materials and are about to begin manufacturing. Basically, there was no progress for a month.

The ETA's that I was given are simply ETA's...I know GiroDisc are doing their best but yeah the ETA's I admit are not the best. Definitely taking longer than otherwise stated.

I misunderstood what they meant by cutting. Those were the models. Testers. They tested for clearances with plastic cut models.

Also they are perfectionists there...and this is why its taking longer. This is indeed good and bad...

http://i87.photobucket.com/albums/k133/mx5adam/girodisc.jpg

I just hope they'll provide spare parts (i.e. rotors) quickly/immediately in the future because if not actually this will be a not so good deal.
I hope they planned at least a 5 years support for spares.
Sorry but presently some doubt is raising...

Bye

Support and replacement parts will be available when needed without issues. Pretty much all the applications that already exists have the replacement parts ready to go. Its just the applications that are not yet ready like this that take some time unfortunately.

I know everyone is waiting and its tough...I will be asking to see if they can do anything for us to speed things up.

Mars is comming up soon and I need to start working on my car soon.

Any real ETA?

Mars is comming up soon and I need to start working on my car soon.

Any real ETA?

I just emailed martin to see if we got any further updates.


-Adam

(11:21:47 AM) girodisc martin: this is showing us inspect the hat for runout
(11:21:49 AM) Adam K: that is awesome
(11:22:09 AM) girodisc martin: the needle is measuring tenths as in .0001"
(11:22:33 AM) girodisc martin: it measures about .00015" runout
(11:22:37 AM) girodisc martin: that's f'ing flat
(11:22:49 AM) Adam K: that is precision
(11:23:22 AM) girodisc martin: it's amazing, we used to actually grind the front hats on the evo x because the machine shop we used just couldn't get them flat
(11:23:54 AM) girodisc martin: now, because we actually took the time to figure out how to do it right, they are all this flat
(11:24:14 AM) girodisc martin: bringing the equipment in house was the best thing we ever did
(11:25:20 AM) girodisc martin: for ref
(11:25:31 AM) girodisc martin: .002" is max allowable runout of a rotor
(11:26:03 AM) Adam K: I like it a lot
(11:26:20 AM) girodisc martin: we'll have the front proto a little later in the day
(11:26:34 AM) girodisc martin: rotor rings arrived yesterday so we can cut them in the coming days
(11:27:35 AM) Adam K: yesss!!!
(11:27:43 AM) Adam K: as soon as humanly possible
(11:28:10 AM) Adam K: so are these the most perfect hats you ever made?
(11:28:35 AM) girodisc martin: well
(11:28:55 AM) girodisc martin: we had one hat that the needle didn't move :-)
(11:29:04 AM) girodisc martin: but these are damn good
(11:29:22 AM) girodisc martin: they are small in diameter, and have some section to them, so that helps
(11:30:13 AM) girodisc martin: the big hats for 15 and 16" rotors are harder for sure
(11:30:25 AM) girodisc martin: we are happy to see .0005-.0007" with those
(11:33:13 AM) Adam K: I love the precision and craftsmanship sir!
(11:33:17 AM) Adam K: keep up the good work!
(11:33:33 AM) girodisc martin: we try :-D


http://i87.photobucket.com/albums/k133/mx5adam/65iT95hWm-XTct1kDs53.jpg

http://i87.photobucket.com/albums/k133/mx5adam/65iT8yAEi-BrVdnNIHRv.jpg

http://www.youtube.com/watch?v=QHK97tyV-Lo

Awesome!

Hi Adam, if you can pass this post along to Girodisc to make sure that they don't make the same mistake, it would be great. http://www.rx8club.com/showpost.php?p=3056848&postcount=80 Thanks.

Hi Adam, if you can pass this post along to Girodisc to make sure that they don't make the same mistake, it would be great. http://www.rx8club.com/showpost.php?p=3056848&postcount=80 Thanks.

Indeed...I will pass this along just as a precaution. However this is why girodisc is testing and made mock models based on the actual Front and Rear RX8 brake assembly. We are talking about the entire spindle, hub, caliper, caliper cage, etc...

but I will pass it along.

-Adam

Straight from Girodisc:

Adam,


Martin took a look at those, he said those rotors were actually made in Taiwan. He said he’s aware of that issue and that our rotors will have no issues clearing the calipers.



Thanks for the heads up though, it is much appreciated!



Jess Kenoyer





1971 Midway Lane, suite G
Bellingham, WA US
360.306.3263

They even know where the competitors manufacture their products...
The wait is suddenly waaay less annoying!

They even know where the competitors manufacture their products...
The wait is suddenly waaay less annoying!

LOL...they know their industry very well...its pretty crazy

OMG UPDATES!!!!!!!!!!!!!!!!!!


(12:36:02 PM) girodisc martin: rotor hats will prolly go on the mill later in the day and we'll have protos to fit. Then, full production should only take a few more days.


http://i87.photobucket.com/albums/k133/mx5adam/girodisc2.jpg

Bumpity bump, news? :)
You also have a pm!

Bumpity bump, news? :)
You also have a pm!

I will ask for more updates.

Its official!!!

http://www.girodisc.com/Rotors_c_959.html

I like the price on their website.... lol!
Thank you Adam!

So when are we getting ours?

More updates!!!

http://i87.photobucket.com/albums/k133/mx5adam/IMG_0916.jpg
http://i87.photobucket.com/albums/k133/mx5adam/IMG_0915.jpg

oooooh yeaaaaaaaaaa

So when are we getting ours?


+1

its time to give us an date, please.

It's no longer freezing there? :)

It's no longer freezing there? :)

nope, +6C and all the snow is gone since 1,5 week. spring is comming up! =)

and my rex needs new brake disc's, my stock disc's is totally worn out and even have some small cracks... they have lived since 2004 and 3 seasons with track duty.

I give the stock brakes A+ on the RX-8.

But these girodisc looks soo nice and light weight!

Adam returns from Vaca tomm, and he will be more than happy to update you guys :)

-Nick

Looking forward! =)

And a reminder, dont forget to send my Hawk DTC60 pads together with my girodisc. (I never got an updated invoice showing my prepaid pads)

Looking forward! =)

And a reminder, dont forget to send my Hawk DTC60 pads together with my girodisc. (I never got an updated invoice showing my prepaid pads)

Email me and I will double check. adamk@thmotorsports.com

Your pads are already at GiroDisc waiting the completion so they can be put in the box with the rotors once shipped.



Hey guys I am back. I will shoot over an inquery to see if we can get a possible ship date.

Sweet!

Email me and I will double check. adamk@thmotorsports.com

Your pads are already at GiroDisc waiting the completion so they can be put in the box with the rotors once shipped.



Hey guys I am back. I will shoot over an inquery to see if we can get a possible ship date.

Thats great Adam, now I know the pads are going with the disc's =)

I'll try to find that mail with the old invoice and resend.

Looking forward to the shipping date.

Your inbox is full Adam, i sent you a mail. Please check your spambox just in case... (bse@xxxxx)
Thanks!

Thats great Adam, now I know the pads are going with the disc's =)

I'll try to find that mail with the old invoice and resend.

Looking forward to the shipping date.

Your inbox is full Adam, i sent you a mail. Please check your spambox just in case... (bse@xxxxx)
Thanks!

Got your emails. Ya my PM box gets filled quickly. Already cleared it out.

I will get back to your emails ASAP!

-Adam

Whats the "free stuff" thats is written in this threads topic? =)

Whats the "free stuff" thats is written in this threads topic? =)

The price originally was going to be a little higher since I wasnt sure we can do a GB on this. To offset this I was going to throw in free stuff (brake pads/SS Lines). Not happening anymore since we were able to secure the GB lower pricing and make it ok with GiroDisc for this one time.



UPDATES as of early this week:

Rotors are all cut and at zinc plated.

Hats are all off the lathe and ready to go on mill, then off the anodize

If I get some pics I will post

-Adam

Is there an ETA on delivery?

is there an eta on delivery?

+1

:)

Sorry guys still waiting on a proper ETA....

Are they using a baby's teeth to machine the hats?
This is getting annoying. Not your way of dealing with us Adam, Girodisc's one of dragging their feet.

Missin out on some decent track days :(

I am being told they will be shipping early next week.

now we're talking!

I am being told they will be shipping early next week.

Great news.

Its going to be a tight schedule but it should work.

Im guessing 8 days delivery to Sweden (it usally takes that long when ordering from USA)

I am super excited too guys!!!

This is great news, though I hope my beat to shit rotors will hold out for one more trackday this weekend.

Time for tracking no :)

Its the beginning of the week, tracking no?

I'm sure Girodisc wouldn't like all the european guys asking for their money back because of these stupid delays.

Well so far we have about 2-3 people only interested. I have no one actually pulling the trigger.

We need 5 orders...

once submitted it will take about 5 days to have them made.

from there shipping can begin after all of them arrive at THMotorsports which will take about 3-4 days to arrive.

SO shipping can begin as fast as roughly 2 weeks.

I cant order them in before all orders are placed.

If someone wants single piece rotors or anything like DBA 5000 series just let me know and I can work with them.




Adam@THM

^^^
This is what i'm talking about btw. 2 weeks became months.

I'm sure Girodisc wouldn't like all the european guys asking for their money back because of these stupid delays.

If the disc arent shipped this week I want a refund and going someware else... :mad:

This delay starts to be silly.

I am being told they will be shipping early next week.

Adam, its time to let Girodisc know that they have to send the discs and tracking no ASAP.

Adam i understand this may be out of your control, but I have lost patience like the others. Next week... refund or tracking no.

If the disc arent shipped this week I want a refund and going someware else... :mad:

This delay starts to be silly.

The week is soon over, Adam, please inform girodisc that if they dont send out the disc and provide us with tracking no atleast I am going to ask for a refund.

I cant wait anymore, sorry.

My local brake dealer has some nice disc ready to go for me...

Guys. Sorry i have been MIA for the last few days...been slammed with work and was not able to be on here much. However got some good news. Talked to Martin at Girodisc today and he told me the rotors will be shipping out OFFICIALLY next week.

The one thing that they do not do in house is anodizing...and the shop that does it for the stalled hard core. Finally they are finished. I will ypdate more soon. But please dont worry...we all(including me) are almost there.

Another next week?

Let's see if it's really next week...
Adam i think that i'm speaking for everybody when I say that we're not worried about our money but the delays are becoming a huge issue for most. Especially in europe the season is open and going to track events or races without any real shakedown isn't the best way to start!

Please remind about the invoice thingy as well ;)

Same here no updated invoice.

Took the freedom to mail girodisc they told me to send the disc yesterday or today.

I cant have another week delay.

As bse says the season is right at the door now and i hate to miss prepayed track days.

Maybe girodisc should give us some sort of gift for the delay?

In this time frame i could built à complete racecar from scratch.

Actually they told me they can ship today even. I will be going over all the orders with him shortly today.

Being patient sucks I know...and this is a long azzzz time to wait. I know guys. But this is all 100% from scratch custom. It took longer than originally expected for sure.

We will be emailing tracking shortly.

Thank you guys

-Adam

Same here no updated invoice.

Took the freedom to mail girodisc they told me to send the disc yesterday or today.

I cant have another week delay.

As bse says the season is right at the door now and i hate to miss prepayed track days.

Maybe girodisc should give us some sort of gift for the delay?

In this time frame i could built à complete racecar from scratch.

finally figured out why you did not get the updated invoice. With your full name and your full email address it exceeds the amount i can use on a single line and that is how the invoices get sent...

I am resending...meow


-Adam

Let's see if it's really next week...
Adam i think that i'm speaking for everybody when I say that we're not worried about our money but the delays are becoming a huge issue for most. Especially in europe the season is open and going to track events or races without any real shakedown isn't the best way to start!

Please remind about the invoice thingy as well ;)

email me on this. As stated above I figured out why some of the invoices were not sending to you guys.

Need your name on the order and I will resend it.

-Adam

Oh and here ya go guys!!!

http://i87.photobucket.com/albums/k133/mx5adam/RX8girodisc.jpg
http://i87.photobucket.com/albums/k133/mx5adam/rx8girodisc2.jpg

oh yes!
Waiting on the nice invoice now ;) Remind Girodisc to put only the same one inside the box!

looking good Adam, just wanted to make sure lionzoo's and my orders are for blanks and not slotted

adam, just one slight adjustment on the invoice, in the address it has USA instead of AUS. Can you please adjust and email the new invoice through. :)

^^ Masterpiece up there Adam.

I guess it was worth the long wait.

Now when Girodisc have all specs for the rex, ordering items in the future wont take any waiting time? for example worn out disc.

+1 for having blank rotors and not slotted.

Ok the disc are finished now its time to pack them and give us tracking no. No more delays.

Bump for tracking numbers. Can't wait!

Ok the disc are finished now its time to pack them and give us tracking no. No more delays.

Heck what happening??

Soon i order some other disc :(

Actually they told me they can ship today even. I will be going over all the orders with him shortly today.

Being patient sucks I know...and this is a long azzzz time to wait. I know guys. But this is all 100% from scratch custom. It took longer than originally expected for sure.

We will be emailing tracking shortly.

Thank you guys

-Adam

Bump Adam...

bump

Heck what happening??

Soon i order some other disc :(

For one week ago they where finished and ready to ship.

Have girodisc gone on vacation???

I will check on the shipping today for you guys. They just told me they will forward all the tracking info to my shipping dept.

I will check up on this

Let's hope they decided to stop bullshitting us.
I sent you a mail yesterday with the infos you requested Adam concerning the invoice

just confirmed! Going out today. All boxed up ready for the shipping people.

Let's hope it isn't another "today" like last friday.
If i were them i'd upgrade all orders to the fastest possible option at no charge. I wanted to order a set for the ferrari as well but i'm not really convinced anymore.

Same here, Im sorry that you have to take all this Adam when its all girodisc's fault.

If im not going to get a tracking no on latest friday (this one) I do want a refund so I can pull some stings here in sweden and get some brake disc superfast.

The season is on now here in SWE.

Let's hope it isn't another "today" like last friday.
If i were them i'd upgrade all orders to the fastest possible option at no charge. I wanted to order a set for the ferrari as well but i'm not really convinced anymore.

Same here, Im sorry that you have to take all this Adam when its all girodisc's fault.

If im not going to get a tracking no on latest friday (this one) I do want a refund so I can pull some stings here in sweden and get some brake disc superfast.

The season is on now here in SWE.

I feel you guys 100% but don't worry...it is all taken care of.

Good! I didnt want to go the other route as dose disc arent as good as girodisc (I guess).

Nobody ever discussed you Adam, you actually did a very great job of keeping us informed ;)