Here is a list of some OEM parts I have hanging around.

Shoot me a PM for a price. Shoot me an offer with the pm as well with what you were looking to spend.

Steering Wheel Air Bag
ABS Unit
Master Brake Cylinder
Water Pump
OMP Sensor Harness
Throttle Body
MT ECU N3H6-18-881F
Front Shocks and Springs
Ignition Coil (lightly used)
Mazda "OEM" NGK Leading spark plug Qty 2

Aftermarket Used Parts:

Progress Sway Bars and Agency Power Endlinks FRONT AND REAR $450 shipped
Tein Hood Dampers $100 Shipped
Prosport Oil Filter Plate $20 Shipped
AEM Cold Air intake filter ONLY!!!! $20 Shipped

2 yellow injectors sold 4 left

price on the CAI?

do u have starter ? the upgraded one after 04....

price on the CAI?

It is just the FILTER for the CAI, not the entire assembly.

do u have starter ? the upgraded one after 04....

Negative

Got Front Right fender piece & the retainer and the left & right piece in the picture (with bolts)

if so shipped to 11375?

thx ;)

Got Front Right fender piece & the retainer and the left & right piece in the picture (with bolts)

if so shipped to 11375?

thx ;)


I had the pieces in the first pic but recently tossed them. Sorry.

price on coils

do you have any of the solenoid control pieces that are attached to the umi. one of the nipples broke off mine.

price on coils

$30 shipped for the Coil, it is a single unit. If you wanted a full set I can arrange that but the other 3 would be reg price.

do you have any of the solenoid control pieces that are attached to the umi. one of the nipples broke off mine.

Negative I had to use them.

do u have starter ? the upgraded one after 04....

check car-parts dot com, youll be able to find a used one for a pretty good price.

The price on the CAI filter?

Shoot me an offer via pm for a shipped price.

price on the turbo

$400

Water sock for AEM Filter Sold.

AEM Filter Still available.

how much for the front shocks?

you dont happen to have a pscm ??

how much for the front shocks?

$50 shipped for each with springs installed on them. They have 15k on them

you dont happen to have a pscm ??

Power Steering Control Module? Negative

I have one brand new Carbign Craft carbon fiber rear license plate (open box) No scratches $100 shipped

Have a used set of Progress Sway Bars and Agency Power Endlinks FRONT AND REAR $450 shipped

will you separate the AP endlinks? if so, how much for just those?

will you separate the AP endlinks? if so, how much for just those?

Sure you have a pm

I have one brand new Carbign Craft carbon fiber rear license plate (open box) No scratches $100 shipped

damn! i would so get that!... maybe in a couple weeks.

got the filter sock!

too bad it stopped raining already:doh: haha

damn! i would so get that!... maybe in a couple weeks.

got the filter sock!

too bad it stopped raining already:doh: haha

Lol I am sure it will rain again.

Updated the list and added some pricing

Aftermarket Used Parts:

Progress Sway Bars and Agency Power Endlinks FRONT AND REAR $450 shipped
Unorthodox Ultra SS Pulley Set (includes all 3 pulleys) $200 shipped (Will include belts)
Tein Hood Dampers $100 Shipped
Greddy Oil Relocation Kit $120 shipped
Prosport Oil Filter Plate $20 Shipped
Carbing Craft Carbon Fiber Rear Plate New (open box) $100 shipped
AEM Cold Air intake filter ONLY!!!! $20 Shipped
Mazsport 650cc High Impedance Injectors (used) w/ Harness Qty 2 ($75 shipped)
Precision Turbo T67 T4 .82a/r (Turbo needs rebuild) ($400 Shipped)

hey brice! i am interested in the air filter. how many miles are on it if you dont mind me asking.

too be honest I have no clue but the condition of the filter is really good. It is the AEM dry filter and the color is gray.

Pics of the coilovers

http://i118.photobucket.com/albums/o113/BluMonstrRX8/IMG_1323.jpg
http://i118.photobucket.com/albums/o113/BluMonstrRX8/IMG_1322.jpg

dibs on the coils. i have the money, pm me ur paypal and ill pm you my shipping info.

I have one brand new Carbign Craft carbon fiber rear license plate (open box) No scratches $100 shipped

I'm thinking I might be interested, where is there a pic of it installed again?

edit:nevermind, I found some pictures, can you pm me payment details?

dibs on the coils. i have the money, pm me ur paypal and ill pm you my shipping info.

Pm sent

I'm thinking I might be interested, where is there a pic of it installed again?

edit:nevermind, I found some pictures, can you pm me payment details?

Done

I will update the thread once payments are made.

payment sent! :)

dibs on those hood dampers..can i get some pics? ill probably get them next saturday after payday

also want the pulleys and oil relocation kit, but just the dampers for now..lol..ill check back in after a month on those other 2 things

payment sent! :)

Got it, going to pack it up today.

dibs on those hood dampers..can i get some pics? ill probably get them next saturday after payday

ok as soon as you send payment over they are yours.

also want the pulleys and oil relocation kit, but just the dampers for now..lol..ill check back in after a month on those other 2 things

Here is a pic of the dampers and relocation kit.

http://i118.photobucket.com/albums/o113/BluMonstrRX8/Car/d1lollicup5.jpg

Also forgot I had the 1 piece gtspec strut bar $115 shipped

sent payment in full for coilovers

Got it! Just need to take them off the car and pack them up I will be shipping the coilovers Monday.

Thanks

Brice

where the hell can i get that damn canister trio

license plate thingie showed up today, thanks for the ninja quick shipping :D:

Is the oil filter relocation kit still available? Pics? Any issues with it? If no issues and in excellent condition then I will take it.

tried to install the license plate piece today and the bolt the license plate screws into popped out behind my back bumper into neverneverland, was going to post pics of it installed as it looked pretty awesome when I mocked it up etc. but oh well, not going to happen today.
(thanks Mazda for using plastic in places where you should have used something else, I understand the weight thing and all but this is the 8000000th time this has happened, my Mazdaspeed bumper even arrived with tabs pre-borken for my convenience...grrr.)

free bump! :D:

license plate thingie showed up today, thanks for the ninja quick shipping :D:

:cool:

Is the oil filter relocation kit still available? Pics? Any issues with it? If no issues and in excellent condition then I will take it.

Yep still available, no issues. I used Permatex Red RTV to prevent from any leaking so I would suggest the same. I am going to send a pm with the paypal address.

Greddy Relocation kit pending sale.

Relocation kit sold!

Relocation kit sold!

damm..lol

Pm me price of water pump shipped to 33177

i'll take the strut bar pm me the info need it asap

do you have an updated list of parts you have left?

i'll take the strut bar pm me the info need it asap

Sending you a pm now.

do you have an updated list of parts you have left?

First post is up to date.

Payment sent

Got it.

Updated first post with whats left.

ACT Prolite Flywheel Brand New (Open Box) $250 Shipped

Flywheel sold!

I am looking for complete front brakes for a project I am starting.

Need the following:
L/R Mounting Brackets and all hardware that is used to mount the calipers to the brackets.
L/R Brake Calipers with all associated hardware.

In addition I would like a set of decent used OEM rotors.

I do not need the brake lines or pads. Let me know if you have any of this stuff and what the cost would be with shipping. Thanks.

any TPMS available ? in need of one !

Sorry guys only what is listed in the first post.

Finally got it put on, I've been really busy and not had much time to mess with the car, right now it's taken apart and this is one of the first things I've completed on it , I'll have better pics once I can get the car back on the road and out in the sunlight. The fitment was pretty good, my only beef (and this is being nitpicky) is with the bottom sides, I may wind up tapping a small screw from behind or just using some 3m to help it fit more snug, just depends on how permanent I want to make it :D:

Transaction went like butter, wish all my online purchases worked out that well, lately I've had some pretty bad luck (mostly with eBay deadbeats)

Finally got it put on, I've been really busy and not had much time to mess with the car, right now it's taken apart and this is one of the first things I've completed on it , I'll have better pics once I can get the car back on the road and out in the sunlight. The fitment was pretty good, my only beef (and this is being nitpicky) is with the bottom sides, I may wind up tapping a small screw from behind or just using some 3m to help it fit more snug, just depends on how permanent I want to make it :D:

Transaction went like butter, wish all my online purchases worked out that well, lately I've had some pretty bad luck (mostly with eBay deadbeats)

Guess you have to order from me more often :)

BNIB Techna Fit Clutch Line and Brake Lines

$25 for the clutch line plus shipping
$90 for the Brake lines plus shipping

$90 Shipped for the TEIN hood dampers!!

bump?