Category: Accessories
Price: $1
Private or Vendor Listing: Private Listing
Part Fits (you may select multiples): Series I
Location (US State/Canada/Int): IL
Item Condition: Used

All prices are shipped to the lower 48

OBO...


HTS brand silicone couplers:

(3) black 2.5” straight couplings: 8 shipped each w/ stainless liner clamps
(1) black 2.5” hump coupling: 10 shipped w/ stainless liner clamps
(1) black 3” hump coupling 10 shipped
(1) black 3x2.5” reducing coupling: 10 shipped
(1) black 2.5x2” reducing coupling: 8 shipped
(1) black 4x3.5” reducing coupling: 10 shipped

Turbo Hoses brand silicone couplers & misc.:

(1) black 3.5x2.5” reducing coupling: 10 shipped
(2) black short radius 2.5” 90 degree elbows: 10 each shipped w/ stainless clamps
(only one shown)
(1) New air filter (forget brand) for 3.5” tube w/clamp: 20 shipped
(1) 3.5” black hose/coupler 6.5” long: 12 shipped
(1) 4x3.5” rubber reducing 90 w/ two aluminum vacuum ports: 15 shipped
(2) blue 2.5” silicone couplings (brand?): 8 shipped
(I have 3 worm clamps I will include)
(1) black AEM 3.5” coupling: 8 shipped

 

So, those LS2 coils just replace the OEM ones? Or explain to me the difference if there is one.

 

AEM intake parts:

(5) AEM intake clamps: 10 shipped

Sizes:
(1) 48
(1) 56
(3) 60


Turbo DIY parts:

(2) 1/2” mild steel T3 turbo inlet flanges tapped w/ bolts: 15 shipped each
(1) 1/2” stainless steel T3 turbo inlet flange: 12 shipped
(1) 1/2” stainless 38mm wastegate flange: 8 shipped
(1) 44mm wastegate downtube with flex section: SOLD
(1) 1/2” mild steel 5 bolt turbine outlet w/ 2.5” exit: 8 shipped
(1) OBX exhaust gasket: 8 shipped
(1) roll of high temp exhaust wrap: 20 shipped
(not sure how long, plenty to do a turbo system)

OEM / fuel components:

(1) OEM air pump pipe: 35 shipped
(2) OEM primary fuel rails: 10 shipped each
(2) OEM primary 2/secondary fuel rails: 15 shipped each
(1) New OEM fuel supply line: 35 shipped

Misc.:

(1) Canton accusump w/ -6AN fitting: 45 shipped

(1) Set of carbon fiber adapters for MS bumper: 20 shipped
(connects to undertray by oil coolers)

 

(1) OEM accordion intake tube: 30 shipped
(2) OEM intake MAF screens: 15 shipped
(1) Greddy Emanage Ultimate upgrade w/ pressure sensor: 225 shipped
(2) Crow 5 point racing harness, manufactured 4/2005: both for 125 shipped

 

Check your PM's.

 

I wouldn't say "just" replace, modifications such as an adapter to hold the coils and a custom harness & ignition wires are needed.

The order of choice would be Yukon > MSD LS2 > OEM. The ones I'm selling are definately stronger than the stockers and the price is right! You can support the BHR crew if you have the coin and want a plug & play option, do your own setup by going to the "bay" or stay simple and replace with OEM.

 

Okay. I don't really want to mess with new harnesses and adapters but I will take the stock ones off of you.

 

(1) Updated starter w/10k miles: 110 shipped
(2) SSV / VDI actuators: 20 shipped ea.
(These are the vdi ones, however can be used for the ssv)
(1) SSV / VDI switch: 20 shipped
(1) Solenoid valve for VFAD: 20 shipped
(1) Solenoid valve for upper intake tract: 20 shipped
(1) Washer fluid tank pump: 20 shipped
(1) One way check valve for vacuum hoses: 8 shipped

 

I will take the AEM intake pipe. I need a few other things for my turbo too.

 

These are New! When I had a set made for the rx-8 I had the machinist make a few more. Perfect for you guys with a top mount turbo.

(1) Aluminum oil metering pump block-off plate: 20 shipped
(1) Aluminum APV motor delete plate: 15 shipped
(4) Block off plugs/bolts for the oil metering injector holes: 20 shipped

 

pmed for msd coils

 

He doesn't have any posts, but I will vouch for him as a good seller. I paid through paypal last night and got a UPs tracking number today. So bump for luck!

 

agreed with cole33, hes been responding very quickly with me and giving me advice on how to setup the MSD coils. I got tracking info the same day I paid with paypal. free bump for a great person.

 

I got my coils and stuff today, all in good condition. 3 days from payment to reciept.
Bump for a good seller!

 

Thanks guys!

Updated and added a few parts & prices.

 

Posts #8 & 10 updated


OT: Anyone know a good place to purchase 1-7/8" 625 inconel tubing?

 

Friday bump!

 

Great to work with. I have a place near my house that may have the hose how many feet are you looking for? I need to swing in there to get my signal hose for the bov and wastegate and the tap fittings

 

OT: Thanks Bee, I found what I needed. I've been following the build thread, nice job on the turbo inlet adapter.

 

http://www.profabrication.com/ABOUT_CAPABILITIES.ASPX


.

 

I received my mounts quickly just as he said, and he's good at getting back to you. Wouldn't hesitate to buy from him.

Thanks, bump for a solid seller.

 

Thanks for the link, Team.

I appreciate the bump, Bose.

Have a good weekend guys!

 

I think the prices are good, however If you guys think anything is a little too steep, make an offer. I would really like to make some room and would rather sell here than throw them on the Bay.


OT: That's really nice this thread got tagged with the key word "robber".

I wonder if I can sue for slander...

 

Bump for best offer.

 

TTT

I have a limited space to work with and need the room for other projects higher on the priority list. These need to go to a new home or these will be boxed up and shelved. Time to make your offer!