legalbegal
10-25-2009, 05:25 PM
I have a coolant line hose and I am not sure where it connects to. I traced it to a nipple connector thats on the engine itself. its by the firewall on the backside of the engine. a hose goes connected to it and run up to the front of the engine , does anyone know where that hose connects to. thanks
Jon316G
10-25-2009, 06:03 PM
Is it possible to take a pic of the hose so we know exactly what you're referring to?
staticlag
10-25-2009, 06:26 PM
Most likely it goes to the heater core.
legalbegal
10-25-2009, 06:44 PM
http://www.rx8club.com/showthread.php?t=178937 look at this site and go to the pic right before the last pic, its a pic of the engine u can see the flywheel, there is a black hose on the engine, thats the hose I need to know where it goes connected to. thanks.
RockfordFosgate
10-25-2009, 11:26 PM
This one is connected to the throttle actuator housing.
nycgps
10-25-2009, 11:34 PM
take the pic down, draw a circle with Microsoft Paint (or whatever other OS uses for basic coloring)
then post it back up.
NgoRX8
10-26-2009, 01:07 AM
if its coming from the engine firewall area, it's going to the bottom of the throttle body.