SOLD!!!!


Still in the box brand new. I want $1000 picked up, or I will ship it for $1100

Specs:

Size - 18x8
Offset - +35
Bolt Pattern - 5x114.3
Weight - 17.8 lb

Never used at all. Tires were not mounted on them. Still in the box all wrapped up. I special ordered these bad boys and it took 4 months to get here from Enkei in Japan. During those 4 months my plans have changed.

Location: Lake Forest, CA

Contact:

(949) 870-0817
mreugenekim@gmail.com

Thank you,

-Eugene

PICTURES:

http://i153.photobucket.com/albums/s205/mreugenekim/IMG_6622.jpg

http://i153.photobucket.com/albums/s205/mreugenekim/IMG_6624.jpg

http://i153.photobucket.com/albums/s205/mreugenekim/IMG_6625.jpg

http://i153.photobucket.com/albums/s205/mreugenekim/IMG_6626.jpg

http://i153.photobucket.com/albums/s205/mreugenekim/IMG_6629.jpg

http://i153.photobucket.com/albums/s205/mreugenekim/IMG_6630.jpg

http://i153.photobucket.com/albums/s205/mreugenekim/IMG_6631.jpg

http://i153.photobucket.com/albums/s205/mreugenekim/IMG_6632.jpg

http://i153.photobucket.com/albums/s205/mreugenekim/IMG_6639.jpg

http://i153.photobucket.com/albums/s205/mreugenekim/IMG_6643.jpg

can you post actual pics of the wheels to make sure you have them .....

can you post actual pics of the wheels to make sure you have them .....

I do not have a camera on me right now, but I will try to borrow a friend's soon and snap some shots.

Try to get a real weight too. I think the 18x9.5 +45 is 17.4lbs, so these should weigh a bit less.

Try to get a real weight too. I think the 18x9.5 +45 is 17.4lbs, so these should weigh a bit less.

That's incorrect. Enkei's website had a PDF with the entire lineup of sizes. The 18x9.5 with a +45 offset weighs in at 18.6 pounds. I recalled incorrectly on my set as well though. They weigh in at 17.8 pounds and not 17.9 pounds. I just checked the chart again to make sure. I was also incorrect about the offset. It is actually a +35. I was lazy when posting it and didn't even go to the garage to look at them. My bad

Enkei RPF1 18x9.5 +45 offset = 17.2 lbs per wheel.
That's from a very reputable vendor on this site. You might be surprised if you actually weigh them.

That's from a very reputable vendor on this site. You might be surprised if you actually weigh them.

Oh, is that right? I might have to actually weigh them on a scale. Interesting

Bump it up! I just weighed the wheels and they weigh 17.4 pounds each! Really damn light for 18x8s! and they aren't even forged.

For those that need proof if I have the wheels or not please e-mail me at mreugenekim@gmail.com and I will send you a link to a video of me showing you the wheels! I don't have a camera, BUT I have the new iPod Nano so I used that to record it.

Cheers,

-Eugene

Got a hold of a camera! New pictures up!

ttt

how much are u selling. i didnt see a price

haha nvmd i see now

damn i want these,b ut i was going to wait till next spring.

Let's do this guys! It's a great deal actually for brand new wheels. The other 3 are still taped up. I only took this one out to take pictures.

ill do it for 5 bills haha

ill do it for 5 bills haha

Oh my gosh...

^ times are tough for many of us =(

DUDE... the OP... GOOD LUCK.. GOOD PRICE>... suckz.. but good luck... and GODAMMMNNN the wheels are sexyy...:yumyum:

oh my gosh...

550?

ill even local pic up. im next door

^ROBB ur ghey.... these are "NEW" if u want them for 550 go buy PHILLIP CHANS

okay 6 haha

maybe an exhaust too haha

id get these and get them right to powdercoat for black

trade me these for my DSLR nikon :)

DSLR NIKON= naked PICS of the HOT WIMMENZ--- might be worth it...:dunno: seems like a WIN WIN to me... also to the OP... post the wheels up on an EVO and S2k forum as well.. GOOD LUCK

DSLR NIKON= naked PICS of the HOT WIMMENZ--- might be worth it...:dunno: seems like a WIN WIN to me... also to the OP... post the wheels up on an EVO and S2k forum as well.. GOOD LUCK

Good lookin out. I don't know any good Evo or STi/WRX forums so I didn't bother yet. I also figured S2K guys won't want these because they like staggered fitments.

good EVO/STI/S2k forums.. GOOGLE is your friend.... and I seen a lot of S2k's run x8 all around... give it a try.. especially since u have new RPF1's... S2ki.com (s2kforum)..evolutionm.net (evo forum)....IWSTi.com and clubwrx.com (sti forum)... GOOD LUCK

you might also wanna chekc out MOCC.com Mazda owners club of california.... MAZDASPEED 3's and 5's share the same bolt pattern as us....not sure about 6's but hey man u gotta network to get shit out.

ttt

ttt

ttt

ttt NEW PRICE

You can throw offers as well

ttt

what is the center bore on these?

what is the center bore on these?

Are you serious? I took a picture of all the specs. It's on the first post, but just for your convenience it's 73

ttt

nice looking wheels. free bump.

our hubs are 67 though...

nice looking wheels. free bump.

our hubs are 67 though...

Thanks. That's not a big deal. These wheels have been tested at 360 degree perfect, and gone through thorough inspection. Without a doubt it should fit snug and not give you issues.

Just make sure to torque the wheels while the car is off the ground so the wheels don't slip from the vehicle's weight pushing it down.

Let's do this!

wait, i the thread you were saying six bills? are you serious? if so, i might have to just sell a kidney for these.

nice looking wheels. free bump.

our hubs are 67 though...

Yea like he said, that isn't a big deal. As long as the wheel doesn't have a hub smaller than the car, all is well. If someone is super worried about it, you can get hubcentric rings that make up the difference lol. My Enkei don't have them on and I haven't noticed weird vibrations or anything like that.

wait, i the thread you were saying six bills? are you serious? if so, i might have to just sell a kidney for these.

Someone was messing around. It's still at $1000 picked up or $1100 shipped (It can be cheaper if you live closer as well, but $1100 shipped is to the east coast)

Yea like he said, that isn't a big deal. As long as the wheel doesn't have a hub smaller than the car, all is well. If someone is super worried about it, you can get hubcentric rings that make up the difference lol. My Enkei don't have them on and I haven't noticed weird vibrations or anything like that.

That is correct. Thanks for confirming.

ttt

real racers dont use hubcentric rings.

less rotating mass.

I'd totally buy these if they weren't +35 -_-

To the top!

Bring Up My Post

ttt

ttt

real racers dont use hubcentric rings.

less rotating mass.

for racing, it's b/c that's just one more thing to get in the way of a quick tire change. makes the wheels harder to get off and put on.

for street and internet racing, there might be another reason, but the effect of a 2 oz. plastic ring placed at the center of rotation is undetectable.

anyway, bump for the OP...those wheels seem to look good on every car. if i was in the market for STX wheels, i'd be on 'em.

wow. way to let that sarcasm do a fly by right over your head.

:icon_tup:

You are a mean person.^

bump...any takers?

sold!!!!

wow. way to let that sarcasm do a fly by right over your head.

:icon_tup:

slow brain day.:o:

plus, interwebs = sarcasm fail. :dunno: