cody205
08-31-2009, 03:21 PM
<carbon fiber>I was trying to figure out which spoiler this was and if there was possibly any links or any prices or anything about it?</carbon fiber>
|
View Full Version : Which Spoiler is this!? It's carbon fiber! cody205 08-31-2009, 03:21 PM <carbon fiber>I was trying to figure out which spoiler this was and if there was possibly any links or any prices or anything about it?</carbon fiber> rodjonathan 08-31-2009, 03:41 PM lol one that shouldnt be on our cars :) lol jk but i have no clue are u sure its cf doesnt look like it Juansito 08-31-2009, 03:53 PM Super Huge CF wings FTW!!!!!! With my wing i get about.....20 extra HP but with that one you got in the picture i guesstimate about 30-45 extra HP!!! Rotr8 08-31-2009, 04:16 PM lOOKS LIKE vIELSIDE... Ross_Dawg 08-31-2009, 04:22 PM Looks like shiet... Those brackets will break with any wind resistance above 60mph cyclone1208 08-31-2009, 04:43 PM Its called a Park Bench made by "FAIL"side!!! cody205 08-31-2009, 06:22 PM Its called a Park Bench made by "FAIL"side!!! Okay, where do I find this park bench though? I've looked, and can't seem to find any links or anything to it. P.S. where do I get another bolt to the bracket? Lol. Lowe's? nuke0907 08-31-2009, 08:56 PM it looks like a cheapo universal spoiler that can be found all over ebay. just search for "ricer wing" cyclone1208 09-01-2009, 09:25 AM We are all hinting for you not to buy it......shouldnt the bolt come with the wing? if not have your local body shop to install it gh8st 09-01-2009, 11:03 AM lol @ juansito.. cody205 09-01-2009, 05:50 PM We are all hinting for you not to buy it......shouldnt the bolt come with the wing? if not have your local body shop to install it It actually came for free with an ait veilside replica kit. I only paid $300, for the front bumper, back bumper, side skirts, AND spoiler. plus. it doesn't seem too universal. It fits the rx-8's curves perfectly.? nuke0907 09-01-2009, 05:54 PM whatever makes you feel better about having a universal wing man. ZumnRx8 09-01-2009, 05:57 PM the VS (which this is/and/or Replica) is actually from the VS RSX :) , they just used it for the D1GT :yesnod: if u have the whole kit i guess thats kool, i think this is what TILT MODE WAS SELLING FOR A FRIEND- REV-illusions 09-01-2009, 06:00 PM ehhhh..... If you're gonna get one of these... at least look at the APR wings.. they're a bit more functional then most of the other wings out there. At the very least they use CFD to test em. tiltmode43 09-01-2009, 06:20 PM the VS (which this is/and/or Replica) is actually from the VS RSX :) , they just used it for the D1GT :yesnod: if u have the whole kit i guess thats kool, i think this is what TILT MODE WAS SELLING FOR A FRIEND- Hey Zumn, Just curious, what the hell are you talking about????? I sold an authentic Veilside front bumper a few months back and met up in person with the buyer. :nono: ZumnRx8 09-01-2009, 06:22 PM ^SORRY :( i apologize, :balls: tiltmode43 09-01-2009, 07:07 PM lol it's cool man... Fortunate Few 09-01-2009, 08:48 PM yep! ^^^ ive heard that the VS Wing is ajustable. this one doesnt look like it is. cody205 09-30-2009, 08:45 AM yep! ^^^ ive heard that the VS Wing is ajustable. this one doesnt look like it is. its adjustablle. You can raise/lower each side(front/back/left/right) like 5 notches. theres two bolts, and like five holes to a bolt. but this'll have to wait until i get back from iraq anyways. E.M.S. 09-30-2009, 09:40 AM It actually came for free with an ait veilside replica kit. I only paid $300, for the front bumper, back bumper, side skirts, AND spoiler. plus. it doesn't seem too universal. It fits the rx-8's curves perfectly.? please explain how a dead straight spoiler follows the curves of an RX8 perfectly...... are you talking about the brackets that can be shaped with any belt sander to follow the lines of any vehicle perfectly for about 3 minutes of your time? cody205 09-30-2009, 11:29 AM please explain how a dead straight spoiler follows the curves of an RX8 perfectly...... are you talking about the brackets that can be shaped with any belt sander to follow the lines of any vehicle perfectly for about 3 minutes of your time? Aha. I see where the problem lies. The picture I took did not show the spoiler properly. The spoiler itself, if you are looking down on the car from the sky...is not dead straight. {====}<<<<NO! It curves fit the curves of the rx8 perfectly. this resembles the spoiler a bit more: |