While searching in the shop manual and under hood, stumbled upon the "EPS" module (under the ECU - which is not called an ECU). The EPS is "Electric Power Steering". Soooo, the EPS cabling that exits the ECU box (front) must be routed through the "EPS Conduit" ;) . Now we know what that was in the TV series.

i have NO idea what you're saying, but if i did i'm sure it'd be hilarious.

Now go try to find the Heisenberg compensators. Then figure out how to uncouple them.

run a level 2 diagnostic before rerouting the phase inducers.

Geeks, geeks, geeks! Run!

Wait a minute...I understood all that...

Quick! Invent a particle or field to explain it!

let's put a subspace containment field around this thread before it gets out of control... ;)

Too late. Resistance is futile...

well we could each try sending an inverse tachyon pulse into the center of the distortion. though i seem to remember that causing the thread to grow larger in the past. but maybe we could collapse it by using a static warp shell as a temporary sub-space barrier.

Even the Mod is a Trekker. ROFL!

Wouldn't we need 3 RX-8's from three different time periods?

Warp Speed 9 Scotty!

Aye Aye Captain.

Bones, where is my report on those energy pulses?

Dammit Jim, I'm a doctor, not an engineer!

I was being chased by the borg but in the nick of time I found the METAPHASIC SHEILDING program in the LCARS that the FERRENGI SCIENTIST made and I escaped in the closest stars carona...

Originally posted by rotarygod
Now go try to find the Heisenberg compensators. Then figure out how to uncouple them.

First you have to disable the DSC... I mean... the Inertial Dampeners.

You mean one of these?
.
.
.
doc

This thread is... highly illogical.

I am soooo glad that none of this makes sense to me :)

LMAO!!!

That must be the newest body kit for the RX-8! It is being made at the Utopia Planitia yards.

OMG...i'm scared...

fear is a perfectly acceptable response....... from an illogical human.

this thread is at least doing warp 5

all hands abandon ship

Originally posted by Doctorr
You mean one of these?

Don't buy that shuttle!! It's obviously one of those chop jobs with a salvage title, where they take the front clip from a shuttle that got phasered in the back and the rear clip from a shuttle with asteroid damage in the front and weld the two halfs together.

It's easy to tell if you know where to look - just compare the 1701-D on the rear section to the NCC-1701-A on the nose! :D

Regards,
Gordon

Originally posted by Gord96BRG
It's easy to tell if you know where to look - just compare the 1701-D on the rear section to the NCC-1701-A on the nose! :D

Good catch - you would have thought the buyer would have discovered that when he ran the vin through Starfax.

Originally posted by rotarygod
Now go try to find the Heisenberg compensators. Then figure out how to uncouple them. Yup, sure would be nice to be able to compensate for that durn uncertainty principle! :D

Ok, time out. Everyone into the Holodeck, where the safety will be turned off. Please do not invite any Hirogens.

Don't buy that shuttle!! It's obviously one of those chop jobs with a salvage title

Nothing that a little matter / anti-matter mix can't fix.