Finally i contact with Spyderauto about their LED brake light. I post up the brake light thread and people are interested with these new LED brake light.
On 12/11, i went to spyderauto for the test fit and took some picture of the fitment and light output. Everything came out great and i approved by Zoom44 for this group buy.
Pictures are below:
There are 3 choices (Clear, Red and Light Smoke Tinted)
Clear
http://i235.photobucket.com/albums/ee249/ray91511/DSC02451.jpg
Red
http://i235.photobucket.com/albums/ee249/ray91511/DSC02457.jpg
Light Smoke tinted
http://i235.photobucket.com/albums/ee249/ray91511/DSC03516.jpg
Back of the light
http://i235.photobucket.com/albums/ee249/ray91511/DSC03517.jpg
Picture of test fit:
Day Time( the first picture shows the black gap on the side but actually is not a gap, just the picture make us confuse, i explained on the bottom of first page)
http://i235.photobucket.com/albums/ee249/ray91511/DSC03454-2.jpghttp://i235.photobucket.com/albums/ee249/ray91511/DSC03457-2.jpg
http://i235.photobucket.com/albums/ee249/ray91511/DSC03459-2.jpghttp://i235.photobucket.com/albums/ee249/ray91511/DSC03458-2.jpg
http://i235.photobucket.com/albums/ee249/ray91511/DSC03460-2.jpg
Night time
http://i235.photobucket.com/albums/ee249/ray91511/DSC03464-1.jpghttp://i235.photobucket.com/albums/ee249/ray91511/DSC03466-1.jpg
http://i235.photobucket.com/albums/ee249/ray91511/DSC03465-1.jpghttp://i235.photobucket.com/albums/ee249/ray91511/DSC03467-1.jpg
Simple Installation Video will be upload once the youtube have fixed their problems.
FAQ:
1. Regarding the load resistor problem, Tamas has given a brief explanation below. "you only need the resistor if you replace both tail/brake lights and the third brake light with LEDs. If you have the LED 3rd brake light but keep the filament bulbs in the other two, then you won't have a problem."
2. Rubber gasket is included but by using your stock OEM rubber gasket will give a better fitment.
3. Red and black wires just have to splice it to the plug originally from the brake light. Red goes to the Black and Yellow wires, Black goes to the Black.
4. Buying a small connector plug for the wire is recommended, around 50 cents.
5. Everything is direct fit, no modification is needed for the fitment.

Price and shipping:
Since i contacted the guy in the company, they agreed to give us 50 dollars shipped per set according we have 25 or more people interested. All item will be shipped by USPS.

For the payment method they accept paypal, Money orders or Creditcard.

For Paypal please send to payment@carpart4u.com, it is 51.50 dollars with the 3% paypal fee shipped to the 48 states, $5 more for HI, AK, GU, PR, VI, POBOX, APO, FPO, AA, AE, AP. Internation such as canada or europe have different shipping charges, please contact if you need a shipping quote.

For Money order can be made out to A.N.W. Group and please put a note contain your name, address, phone number and attention to Rx8 LED Brake light Group buy.

After sending the payment, please send me a pm, make sure have your name, address,contact number and email along with your Payment transection ID. If you are using someone else's paypal, please pm me with their Name and your Forum ID so i can make sure the item is for you.
They will provide me the tracking number and i will PM you the tracking number once the item have been shipped. Should take around 1 business day.

For return policy, due to any shipment damaged or defective LED, please contact me for an exchange. They will cover up to 60 days.

If everyone have questions, feel free to pm me or ask on the thread.

Here is the list of interest, please confirm which color you are getting and put next to your ID. I.E : lxlxlxl_saki_lxlxlxl (Red), i will mark as paid once the payment is clear and mark as shipped once the item is shipped. And the tracking number will be available as well. Thank you once again and hope you guys enjoy this brake light. Contact me to remove your name if you are no longer interested.

NOTICE: The item will be shipped out once they get the first 10 payments or the group buy will be close within a week if there are not enough payment, and the payments that paid will be refunded in full.

1.koksik
2.Silver06
3.BBQdDude- (smoked)PAID SHIPPED and Tracking Provided
4.lilring(smoked) - PAID SHIPPED and Tracking Provided
5.perks11 (clear) - PAID SHIPPED and Tracking Provided
6.dozer
7.Renesis07
8.RyanX-8
9.southjerz8
10.9krpmrx8
11.05rex8(smoked) - PAID SHIPPED and Tracking Provided
12.Ross_Dawg(smoked) - PAID SHIPPED and Tracking Provided
13.laythor (smoked) - PAID SHIPPED and Tracking Provided
14.Aipex8(Clear) - PAID SHIPPED and Tracking Provided
15.longpath
16.Atilla
17.Marvel (clear) - PAID SHIPPED and Tracking Provided
18.DJ Charlee (smoked) - PAID SHIPPED and Tracking Provided
19.2tone (smoked) - PAID SHIPPED and Tracking Provided
20.WVBoosted8 (smoked) PAID SHIPPED and Tracking Provided
21.ferg
22.thawk97
23.setsuwa - (Smoked) -PAID SHIPPED and Tracking Provided
24.Kippc
25.Grungepup (smoked) PAID SHIPPED and Tracking Provided
26.Rx8 Fanatic
27.Zepo.
28.1stRotaRy
29.shinka~mami(smoked) PAID SHIPPED and Tracking Provided
30.gr8thandling
31.ADVMYTH
32.CarAndDriver
33.Tamas
34.rx 8speciale
35.TeeFar
36.ca18detsilvia
37.Andreas Neophytou(Smoked) - PAID SHIPPED and Tracking Provided
38.onyx8(smoked) - PAID SHIPPED and Tracking Provided
39.ShellDude(clear) - PAID SHIPPED and Tracking Provided
40. rx8thunder(smoked) - PAID SHIPPED and Tracking Provided
41. rx8speeddmon (smoked) - PAID SHIPPED and Tracking Provided
42. TheWulf (clear) - PAID SHIPPED and Tracking Provided
43. marsredr100 (clear) - PAID SHIPPED and Tracking Provided
44. streettuner08 (smoked) - PAID SHIPPED and Tracking Provided
45. WantedTwo(red) PAIDSHIPPED and Tracking Provided
46. 8rocks (smoked) PAID SHIPPED and Tracking Provided
47. egads (clear) PAID SHIPPED and Tracking Provided
48. santana (smoked) PAID

add shelldude assuming the alignment problem in the pictures is an optical illusion. Something doesn't look right...

That smoked one looks great. The asking price 51.50 isn't a bad price either.

Very nice, if I didn't already have the RX8 emblem in mine I would go for it. :)

Please Check you PM asap

ok I got a problem saki..when trying to send payment I got this message:

This recipient accepts PayPal payments only through their website. To complete this payment, please go to their website and follow their instructions, or email the recipient for instructions.

* Some required information is missing or incomplete. Please correct your entries and try again.


oh and I want the smoked one

throw me on the pile as well please :).

will send payment via paypal as soon as the problem 05rex8 is resolved.

-smoked please

I hate to pry... but did you take any pictures of the tinted lights day/night?

Looks like you only have pics of the clear installed... TIA

I hate to pry... but did you take any pictures of the tinted lights day/night?

Looks like you only have pics of the clear installed... TIA

+1....

+1....

+2.....!

It looks like there's an alignment issue with the first daytime picture. Otherwise I'd be interested, but if the fitment isn't spot on I'll pass.

Pattern and overall look is great but it doesn't look flush. It looks sunk into the trunk.

correct me if I'm wrong, but I think this is what we are worried about:

http://i170.photobucket.com/albums/u257/joeltross/DSC03454-2.jpg

I hate to pry... but did you take any pictures of the tinted lights day/night?

Looks like you only have pics of the clear installed... TIA

It looks like there's an alignment issue with the first daytime picture. Otherwise I'd be interested, but if the fitment isn't spot on I'll pass.

Actually i would say that picture shows a bit off but it did came out pretty good on fitment, i would say if you are using the stock rubber gasket will be even better, i will try to install a different one tmr and take a close up picture. The paypal will be solve tmr. sorry for the delay.

i think it looks good

Ross Dawg's got it... that's the one that got my attention. I'll have to pass if that's going to be "normal" fitment.

I am interested for the Tinted version.ADD ME TOO. Can I have a quote for Cyprus (Europe) please.

Regarding the fitment issue, i double check and make sure that is the picture's problem, let me explain how i said so. first, when we look at picture at that angle, we saw the clear plastic on the side and since inside is dark, it shows that there is a gap but actually there is no gap but the clear plastic in the side made us confuse. Picture below clearly shows the side is clear and when you put into the trunk it will cover up the light and looks black.
http://i235.photobucket.com/albums/ee249/ray91511/DSC03521.jpg
but if we look at the front picture, it will not be a problem and everything fit fine.
http://i235.photobucket.com/albums/ee249/ray91511/DSC03458-2.jpg
Hope this will answer you guys' question. Don't let the pictures confuse you or i might take that picture off if needed. thanks.

That helps quite a bit, thank you! Put me down for clear now that I understand.

oh yeah that cleared it up... thanks man

I'll take the tinted one :)

paypal address changed, this should works fine guys, thanks

So saki, the one you have installed (and shown in the pictures) - is that the clear one or the smoked? Just asking because it seems it's the clear but you said you got the smoked.
The photo of the uninstalled smoked light seems to have a much darker tint than your installed pics would suggest.

those are the smoke tinted one, seems like under the sun it looks like clear. But the picture for the uninstall one is the one that i installed. maybe it is too bright to see the light tint. the camera setting might be an issue as well.

Hey saki, i'm having the same error message when trying to send money using Paypal even with the new address. Thanks

How much is it to ship to Canada l6h5w4 -- they don't answer their email... Would like to order

pm'ed.

onyx8 i got your payment, thanks.

will these ship as soon as you get 10? It would be nice to have as a Christmas present :naughty:

yes, will ship the same day once i get 10. Lilring and Ross Dawg i get your payment, thanks

Payment sent for the clear version.

got it. thanks, 6 more to go!

payment sent

get it, thanks.

Mmm very tempted. What's the shipping cost to Canada? (k2b6v4)

38 people and only 5 have sacked it up? come on guys ;)

Clear please, payment sent. :eyetwitch

Looks like it'll be 10 by the time I settle up tomorrow.

saki, payment sent put me down for the clear as well

ok, the payment will be check on monday since they are not opening on saturday and sunday, please be patient and it should be 7 people paid already, most likely item will be starting to ship out on Monday(2days for 3 more people, not that hard rite? =]) thanks guys. hope you guys like the product.

bump, come on more people need to pay!! :P

payment sent for smoked

okay thats 8 only need 2 more, lets go people.

Payment sent. Please send smoked version. Thanks for organizing this.

Looks like I'm #10... Payment sent for clear verison.

Anybody have any idea if this will work on the '09 model? It'll probably fit fine, I think the brake light and port is the same. But what about the load resistor problem? The OEM tail lights are already LEDs so would that be a problem?

for 50 bucks i'd say try it, you could always resell it here if it doesn't work.

Looks like I'm #10... Payment sent for clear verison.

Yay! This will be the easiest X-mas present my sister has ever given me ;)

just paid and pm'd for the tinted version

Sent payment for clear

PM sent and paid.

sorry for the delay, i will get the rest of the payment today and ship out with tracking number as well. i will send out PM with tracking conformation once it is available.

I am definitely in... deciding on white vs smoked :)

Will send payment later today

Payment sent for CLEAR

:)

please don't forget to send me a pm after sending the payment including the info stated in the first page. Thanks , still have some unknown payment.

will you pm back to confirm? just want to make sure my payment and pm went through ok...

EDIT: sorry, just saw "PAID" was by my name...i'm an idiot. thanks!

I sent you a PM as well... let me know if there are any problems.

sure, i will send out conformation email to you guys asap. item will be shipping out today and i will get the tracking asap. thanks for the wait.

Lets get some picks up after you guys install them! If there are no problems I will make the order.

how do i get one? Would be cool to change the LEDs to color ones! jk but i do want one. see ya later.

how do i get one? Would be cool to change the LEDs to color ones! jk but i do want one. see ya later.
um...read the first post

Payment Sent, Smoked!!

Payment sent, SMOKED

If you do have LED tail/brake lights as well, what kind of load resistor would you use? And would you put in with the third brake light or with the tail/brake lights or all?

Would any of the 6 ohm ones on ebay do fine?

how can i get in on this deal this is the first time i ve done a group buy

^just tell saki to put you on the list and what color you want, then when you wanna pay, see instructions in first post

If you do have LED tail/brake lights as well, what kind of load resistor would you use? And would you put in with the third brake light or with the tail/brake lights or all?

Would any of the 6 ohm ones on ebay do fine?

I just asked this question to Rotary Rasp -- which is our resident LED expert. You need one resistor per turn signal (wired in series) if you have LED turn signals, you do not need any for brake lights.

The resistors should be about 10 ohms, 25W each. Don't buy them, you can make them for pennies... just go over to any electrical supply store and pick up the resistors (like $0.05 each), some shrink wrap ($0.50/yard -- you'll need about an inch per resistor) and some connectors or wire taps (maybe $0.25). These things are so over priced it makes me want to start selling some :)

um...read the first post

um...read my post that i corrected. sorry

Payment sent, SMOKED

Payment Sent, Smoked!!
Both payment have been received and will be shipped out today, tracking number will be available tmr. Thanks
I just asked this question to Rotary Rasp -- which is our resident LED expert. You need one resistor per turn signal (wired in series) if you have LED turn signals, you do not need any for brake lights.

The resistors should be about 10 ohms, 25W each. Don't buy them, you can make them for pennies... just go over to any electrical supply store and pick up the resistors (like $0.05 each), some shrink wrap ($0.50/yard -- you'll need about an inch per resistor) and some connectors or wire taps (maybe $0.25). These things are so over priced it makes me want to start selling some :)
Thanks for the explanation. All tracking number and confirmation number already been send out, PM me if anyone did not received the numbers. Thanks

Payment sent, RED

Thats right I said red :P

OK I got my light in the mail today... looks good upon opening. The light itself IS back pretty far into the housing (will have to wait how it looks once installed). Smoked is not really smoked that much, so I will try to darken up the tint when I get home. Other than that, looks like good build quality and housing. I won't be able to install it until Jan. when I get home but hopefully someone else will upload pics when recieved.

thanks for the heads up Ross, hope you like the product and let me know if you have any problems or questions, thanks.

I hope mine gets here within the next week... my 8 is parked for the winter at my mom's and I get to check up on her over xmas :)

Knowing customs I'll get it by Valentine's day :(

thanks for the heads up Ross, hope you like the product and let me know if you have any problems or questions, thanks.

yeah super fast shipping is always a plus too ;)

Ross, how was the fitment in your opinion?

Take care,

Brian

<edit>Whoops, missed the January install comment my bad.

Anyone else get theirs installed yet?</edit>

I got mine too, same one as Ross.
I did not get to install it, probably tomorrow. I will take pics. The smoked is not that dark, but it looks good still. Easily fixed if wanted. And yes the light is far back into the housing, but the oem one is about the same. Can't wait to install it. Thanks saki for setting this up. Fast delivery.

I should have mine tomorrow or saturday. Perhaps i can install it on Sunday. Will provide an update once I have one.

Got mine installed. I actually removed the LED array from the clear housing that was provided and installed it into the stock housing. I like the serrated plastic that the stock housing has and it has a better gasket and fits better. I was surprised at how bright it is. Maybe twice as bright as the stock light. Very nice. Now I need to LEDize my 4th brake light. A few pics (just a few... it's freezing out!)

http://i234.photobucket.com/albums/ee35/Aipex8/Brake/DSCF1097.jpg
http://i234.photobucket.com/albums/ee35/Aipex8/Brake/DSCF1098.jpg
http://i234.photobucket.com/albums/ee35/Aipex8/Brake/DSCF1099.jpg
http://i234.photobucket.com/albums/ee35/Aipex8/Brake/DSCF1101.jpg
http://i234.photobucket.com/albums/ee35/Aipex8/Brake/DSCF1102.jpg
http://i234.photobucket.com/albums/ee35/Aipex8/Brake/DSCF1103.jpg
http://i234.photobucket.com/albums/ee35/Aipex8/Brake/DSCF1106.jpg

nice job, good idea on using the oem housing

would be easy to tint that for us smoked guys

^ just buy the smoke one

I bought the smoked one :uhh:
it's sitting in my garage

what I meant was if the oem housing fits better, than Aipex8's idea is the way to go...and easy to tint it if smoke is wanted

I bought the smoked one :uhh:
it's sitting in my garage

what I meant was if the oem housing fits better, than Aipex8's idea is the way to go...and easy to tint it if smoke is wanted

I'm sure the aftermarket housing would have fit with some more work, but it definitely didn't pop in like the OEM housing does. Not complaining though, nice bright LEDs for a good price.

Paid mine. SMOKED. :)

Payment sent, PM sent, smoked for me.

Take care,

Brian

thanks for the pictures aipex8, those look good on your 8, good that we have the same color 8. lol, hope you guys enjoy the product and i will have the rest ship out today, sorry for the delay cuz i just back from Las Vegas yesterday.

Received mine today, should have it installed sometime next week. I probably won't post pics, as it will just look like the other Ti-gray 8's, but first impression is that this is product well worth the money..... Thanks for setting this up Saki!!

no problem, hope you enjoy the product and let me know if you have any problems or questions.

mine came in today too... another tit gray so I probably won't bother with pictures either... still on the fence about which assembly to go with and since it's 30 degrees out I'm not in a big hurry to decide. Maybe Sunday for install if it's not too cold.

i've got a brilliant black.. think the tinted would look good on that? i'm tempted to buy it!

i've got a brilliant black.. think the tinted would look good on that? i'm tempted to buy it!

I have BB and bought the smoked, but will post pics up on the 30th ;)

I have BB and bought the smoked, but will post pics up on the 30th ;)

Awesome!! Guess I'll have to be patient just a LITTLE longer!!!

I received mine today and swapped the clear housing with the OEM like Aipex8 did. Great upgrade and goes well with the rest of my LEDs.

Thanks saki :eyetwitch

man im gettin jealous everyone else seems to have theirs but me, i hate being patient i want mine now! ha ha. marsredr that looks good on your VR cant wait to get it on mine.

I haven't been able to install mine yet. It's below zero here and it's freezing in my garage.

put mine in today as a total swap... zero complaints, looks awesome, would definitely recommend soup to nuts.

thanks for the GB!

I have a tinted one that is going on tuesday and my 8 is titanium gray

I am waiting mine also.
My OEM housing is scratched so I will not use it.
I will install it as it is. Will that be ok?

Clearly these are very bright, and I do like the safety advantage of having a brake light that comes on instantly instead of having a quarter to eighth second hesitation as the incandescent filament heats up (maybe it's actually less than that; but that's what it seems like to me); but I couldn't see in the discussion (and I did use the search function for the words voltage and regulation) if there is any circuitry to protect the LEDs from normally occurring voltage variations in the RX-8's electrical system. In reading up on the tail lights that Rotary Rasp used to produce, I noticed that RR went to considerable effort to protect LEDs from voltage variations to ensure their long life. Is there anything similar in these?

I'd suggest PM'ing RR and asking him. He might not see your post. Then paste anything he says back here.

I am waiting mine also.
My OEM housing is scratched so I will not use it.
I will install it as it is. Will that be ok?

it'll be fine... i went ahead and did a full swap after completely dismantling my stock housing. I didn't see a lot of difference between old and new, except that the rubber seal was actually a bit better suited on the new one.

I couldn't see in the discussion (and I did use the search function for the words voltage and regulation) if there is any circuitry to protect the LEDs from normally occurring voltage variations in the RX-8's electrical system.

Ya know, I thought about that too but didn't take the time to pop open the new housing to see what all is in there so I can't add much here. Although, prior to reading your post, I had already considered the "fail" potential of these lights and while doing my installation instead of completely cutting the OEM plug, I merely tapped into it using wire taps so that if I ever need to go back to the conventional bulb connector, I can with minimal effort.

So, in the months ahead if we find "fail", for me it will be a matter of making a visit to v-leds, picking out a nice multi-angle, multi-led, regulated LED, gutting the new clear housing (the stock is red), and going back to the old connector.

yeah, I know... I'm rambling.

thanks for all those pictures guys, really hope you guys enjoy the product and have a great Christmas time with those LEDs. =]

it'll be fine... i went ahead and did a full swap after completely dismantling my stock housing. I didn't see a lot of difference between old and new, except that the rubber seal was actually a bit better suited on the new one.



Ya know, I thought about that too but didn't take the time to pop open the new housing to see what all is in there so I can't add much here. Although, prior to reading your post, I had already considered the "fail" potential of these lights and while doing my installation instead of completely cutting the OEM plug, I merely tapped into it using wire taps so that if I ever need to go back to the conventional bulb connector, I can with minimal effort.

So, in the months ahead if we find "fail", for me it will be a matter of making a visit to v-leds, picking out a nice multi-angle, multi-led, regulated LED, gutting the new clear housing (the stock is red), and going back to the old connector.

yeah, I know... I'm rambling.

Yeah, I made sure I could go back to stock also. I actually had a 7440 bulb with a plastic base, so I removed the bulb and soldered the wires right to that so I can plug right in to the stock connector. I also added a 10ohm 1watt resistor like I use on all my other LEDs for protection.

I installed my smoked brake light tonight. I didn't connect the wires yet though, as I'm going to use Shelldude's method with some wire taps. I'll pick some up tomorrow. As for the fitment, I noticed that I could not get the lens to fit flush with the trunk like the stock one. I compared the OEM gasket with the aftermarket one. The OEM one is foam, as the aftermarket is a hard rubber. I swapped gaskets with the OEM one and it fit PERFECT. The problem is the aftermarket gasket is too thick. So I suggest everyone who is having this issue, to swap out gaskets. Here's some pics.

http://i246.photobucket.com/albums/gg119/jonathanwells81/3rdbrake2.jpg
http://i246.photobucket.com/albums/gg119/jonathanwells81/3rdbrake3.jpg
http://i246.photobucket.com/albums/gg119/jonathanwells81/3rdbrake4.jpg

^ thanks for sharing that. I will be doing mine on tuesday. Please make a DIY when you do the wires.

^ thanks for sharing that. I will be doing mine on tuesday. Please make a DIY when you do the wires.
yup, I'll get more pix going too.

also just a side note on the OEM gasket....it is glued to the housing with some light adhesive...so pull gently, otherwise you may tear it beyond use

I have to say that smoked looks very nice on white. Something I noticed as I tightened down the aftermarket assembly (with the aftermarket gasket) was that it sealed nicely once I got the nuts securely fastened...

With the OEM light there was about a 1mm space between the light and the gasket that I don't have with the aftermarket one.... possibly a bonus as it's one less thing that can potentially cause water to leak into the trunk.... mileage may vary?

I have to say that smoked looks very nice on white. Something I noticed as I tightened down the aftermarket assembly (with the aftermarket gasket) was that it sealed nicely once I got the nuts securely fastened...

With the OEM light there was about a 1mm space between the light and the gasket that I don't have with the aftermarket one.... possibly a bonus as it's one less thing that can potentially cause water to leak into the trunk.... mileage may vary?
It's actually sunlight silver :D:

I tried tightening it to make it seat flush like you did, but did nothing :dunno:

oops, my apologies.... sunlight silver it is... and very nice!


something I should add on the wires....

yellow on black = positive
black = negative

so...

red from new light taps into yellow on black

and

black from new light taps into black

not your fault, bad lighting :)

I have to say that smoked looks very nice on white. Something I noticed as I tightened down the aftermarket assembly (with the aftermarket gasket) was that it sealed nicely once I got the nuts securely fastened...

With the OEM light there was about a 1mm space between the light and the gasket that I don't have with the aftermarket one.... possibly a bonus as it's one less thing that can potentially cause water to leak into the trunk.... mileage may vary?

I HOPE IT DOES... mine white. lens smoked. yummy

PM and payment sent:lol2:

Ok, I finished my light install.

I used these wire taps, can be found at walmart
http://i246.photobucket.com/albums/gg119/jonathanwells81/a.jpg

As Shell mentioned, black and yellow wire goes to red and black to black
http://i246.photobucket.com/albums/gg119/jonathanwells81/d.jpg
http://i246.photobucket.com/albums/gg119/jonathanwells81/e.jpg

Wrapped the wires up with electrical tape
http://i246.photobucket.com/albums/gg119/jonathanwells81/c.jpg

Reinstall trunk liner, and reinstall plastic clips......

It works! Pic sucks I know
http://i246.photobucket.com/albums/gg119/jonathanwells81/f.jpg

I just finished mine also.. I will take pics tomarrow. I used the OEM seal on the light for a slight better fit. I also just cut the wire connecter off and then just connected the wires with wire connecters that are supposed to use in wireing an electrical switch in a house..(thanks to the nieghbor).. The whole proccess was very easy.

I just finished mine also.. I will take pics tomarrow. I used the OEM seal on the light for a slight better fit. I also just cut the wire connecter off and then just connected the wires with wire connecters that are supposed to use in wireing an electrical switch in a house..(thanks to the nieghbor).. The whole proccess was very easy.
I was going to use those connectors too, but I wanted to retain the stock plug for the stock brake light, in case I needed to go back to stock

Does anyone know how this would look with an Rx8 brake light cover? Will you still be able to see the LED's, or would this defeat the purpose? I have one I haven't installed and was wondering if I will still have use for it when I decide to buy the smoked LED brake light. Thanks.

Does anyone know how this would look with an Rx8 brake light cover? Will you still be able to see the LED's, or would this defeat the purpose? I have one I haven't installed and was wondering if I will still have use for it when I decide to buy the smoked LED brake light. Thanks.

I would think that smoked with a stealthed brake light cover would look good.

Does anyone know how this would look with an Rx8 brake light cover? Will you still be able to see the LED's, or would this defeat the purpose? I have one I haven't installed and was wondering if I will still have use for it when I decide to buy the smoked LED brake light. Thanks.

lol that's exactly what I have going on...

When I install it on the 30th I'll take pics of both for ya

paypal payment sent and pm sent as well :) SMOKED!!!!!!!!!!

thanks ;)

http://i544.photobucket.com/albums/hh358/lilring/IMGP1170.jpg

http://i544.photobucket.com/albums/hh358/lilring/IMGP1169.jpg

here is the LED Smoke 3rd brake light on my 04 Titanium Gray

Lookin' good!

This is really a great mod, I love the look, it really freshens up the rear. Now I'm going to get some smoke tint for my tails to match.

^ let me know if you find some tint for the tails that match.. I want to do the same.

^ let me know if you find some tint for the tails that match.. I want to do the same.

I am going to hit mine with some VHT Nightshades paint that I have left over from doing my tail lights.

Take care,

Brian

^ let me know if you find some tint for the tails that match.. I want to do the same.
I'm thinking of using these:
http://www.rx8strakes.com/index.asp?PageAction=VIEWPROD&ProdID=298

The gunsmoke set allows a 93% light output, so it's not too dark. It should match the 3rd brake light pretty good, since that is not heavily smoked.

I'm thinking of using these:
http://www.rx8strakes.com/index.asp?PageAction=VIEWPROD&ProdID=298

The gunsmoke set allows a 93% light output, so it's not too dark. It should match the 3rd brake light pretty good, since that is not heavily smoked.

After you get those take a pic and send it to me.. I want to see how well it will match. I have been thinking of those too but they look dark in that one pic.

Paid via paypal for smoked on 12/25/08 from boostedrotary @ yahoo.com.

just put mine in. for $50 this is really cool - very nice, clean, "modern" (as in not from 2004) look for the brake lights.

i definitely noticed the fact that it's not flush. i'll take the advice from previous posts to swap out for the oem gasket. it looks so nice though, too bad i'll hardly see it!! :) i'll have to back into parking spots in front of glass store-fronts every once in a while to remind myself! :lol:

http://i544.photobucket.com/albums/hh358/lilring/IMGP1170.jpg

http://i544.photobucket.com/albums/hh358/lilring/IMGP1169.jpg

here is the LED Smoke 3rd brake light on my 04 Titanium Gray

Can you post some pics with the lights on during the day? Also, how would you say this looks without tinted tails because I seriously want to get this? Thanks.

Saki - Paid and Pm'd. thx.

Saki was mine shipped? Not PMed yet

juat got mine today and installed them tonight, if its nice tom i will post pics, but i do have to say they look SEXY with the Kenstyle rear bumper! Once again thanks for the GB saki

Any update on when the next set is shipping?

Any update on when the next set is shipping?
will be shipping out on Wednesday, sorry for the delay but they will be back to work on Wednesday.
Saki was mine shipped? Not PMed yet
Yours shipped out already, i will pm you again. Sorry for the delay.
Saki - Paid and Pm'd. thx.
get it, both will ship out on Wednesday
Paid via paypal for smoked on 12/25/08 from boostedrotary @ yahoo.com.
get it, will ship out on Wednesday. Sorry for the delay.

not PMed but thnks anw

Can you post some pics with the lights on during the day? Also, how would you say this looks without tinted tails because I seriously want to get this? Thanks.

I will take a pic later today with the lights on. I dont know about the tinted tail light i want tosee another 8 with it since i dont have exp. with tinted lights

8rocks, WVBoosted8 and egads item will be ship out today and tracking provide tomorrow, Grungepup and shinka~mami tracking provided already, thanks

saki :) thanks!! arrived today safe and sound :)

8rocks, WVBoosted8 and egads item will be ship out today and tracking provide tomorrow, Grungepup and shinka~mami tracking provided already, thanks

Saki - Haven't received tracking information yet! Were you able to ship them out on Wednesday?

saki tracking provided does not exist. PM me please

Ok, finally got around to installing mine today...

Direct Install of Smoked LED Brake Kit:

http://i170.photobucket.com/albums/u257/joeltross/DSCN1258.jpg

http://i170.photobucket.com/albums/u257/joeltross/DSCN1257.jpg

LED Housing with Stock Bracket & "RX8" logo:

http://i170.photobucket.com/albums/u257/joeltross/DSCN1256.jpg

http://i170.photobucket.com/albums/u257/joeltross/DSCN1255.jpg

http://i170.photobucket.com/albums/u257/joeltross/DSCN1253.jpg

Which setup do you guys like better? I'm torn...

Saki - Haven't received tracking information yet! Were you able to ship them out on Wednesday?

Yeah, I haven't received word of any shipment, any news?

Ok, finally got around to installing mine today...

Direct Install of Smoked LED Brake Kit:

LED Housing with Stock Bracket & "RX8" logo:

Which setup do you guys like better? I'm torn...

Smoked lens or OEM without the mask. The LEDs are bright enough that you can see them through the mask and the light they put out isn't diffuse, they are individual dots of light. I just don't think it works well with the mask. The pics of the first setup look great though.

Yeah I'm going to stick with the Smoked upgrade... looks a lot cleaner than with the mask. Thanks

These LED's are REALLY bright! Very impressed...

Yeah, I haven't received word of any shipment, any news?

I've got my tracking information. ETA - 1/5/09. Can't wait!:)

I was trying to remove the trunk liner today but wasn't successful. I tried to pry the clips using butter knives; got them to loosen up but they wouldn't pop out.
I'd appreciate any pointers!

The LED's should arrive tomorrow and I have also purchased some smoke tints to overlay the tail lamps with. Will post pics after the install.

all of my clips you just had to unscrew using a Phillips...

you have to give them a pretty good yank

If they aren't the "screw" type, you have to loosen the smaller circle away from the outer circle using a flathead of some sort (exacto, small flathead screwdriver etc.)

I was trying to remove the trunk liner today but wasn't successful. I tried to pry the clips using butter knives; got them to loosen up but they wouldn't pop out.
I'd appreciate any pointers!

The LED's should arrive tomorrow and I have also purchased some smoke tints to overlay the tail lamps with. Will post pics after the install.

please post pics of your set up with the smoke tails.. A lot of us have been waiting for someone to do the smoke tails and the smoke brake light.. and Which smoke stuff are you buying?

Ok guys.
Just received mine this morning and installed it.
I had some probs with the rubber around the light.
It was new and very hard so the light as much as I tried to push it would not sit in right place.
So was I did I replaced the new rubber with the old one. And it worked.
BTW IT LOOKS AWESOME ON WHITE.
What do you think?

http://img.auctiva.com/imgdata/1/0/8/2/8/3/0/webimg/213923972_o.jpg
http://img.auctiva.com/imgdata/1/0/8/2/8/3/0/webimg/213923984_o.jpg
http://img.auctiva.com/imgdata/1/0/8/2/8/3/0/webimg/213923999_o.jpg
http://img.auctiva.com/imgdata/1/0/8/2/8/3/0/webimg/213923950_o.jpg
http://img.auctiva.com/imgdata/1/0/8/2/8/3/0/webimg/213923961_o.jpg

I'll try to take some pictures tonight.

order updated thanks for all the picture, hope u guys like it=] happy new year btw.

Saki whats the next GB?

what you guys need :O

what you guys need :O

If it's for the 8, we NEED it:)

So my package was set to arrive today with my smoked out LED brake light. I was pretty excited because tomorrow is my first day off in 2 weeks, so I was going to install the brake light. I opened up the package and wtf is this. I dont know what vehicle this LED brake light is made for but it definitely isn't an RX8. Not only that but one of the tabs was broken off. I took these pictures as soon as I opened the package.

http://i133.photobucket.com/albums/q52/kustomizedstang/DSC_0057-1.jpg

http://i133.photobucket.com/albums/q52/kustomizedstang/DSC_0059.jpg

WTF? that's probably for the 3 or something... contact Saki, he'll tell the company to send you a replacement and the correct part

what you guys need :O

anything you can offer us with a great price

[QUOTE=WVBoosted8;2800528]So my package was set to arrive today with my smoked out LED brake light. I was pretty excited because tomorrow is my first day off in 2 weeks, so I was going to install the brake light. I opened up the package and wtf is this. I dont know what vehicle this LED brake light is made for but it definitely isn't an RX8. Not only that but one of the tabs was broken off. I took these pictures as soon as I opened the package.
/QUOTE]

Ok, I have the same problem as WVBoosted. What I got is the same; definitely not something for the RX8.

what you guys need :O

How about rear fog light?

[QUOTE=WVBoosted8;2800528]So my package was set to arrive today with my smoked out LED brake light. I was pretty excited because tomorrow is my first day off in 2 weeks, so I was going to install the brake light. I opened up the package and wtf is this. I dont know what vehicle this LED brake light is made for but it definitely isn't an RX8. Not only that but one of the tabs was broken off. I took these pictures as soon as I opened the package.
/QUOTE]

Ok, I have the same problem as WVBoosted. What I got is the same; definitely not something for the RX8.

I have the same problem. PM'd Saki, said it is probably an RSX brake light and that he'd send a return label so I can get the right one. Just waiting for the label now.

sorry about the problem of the last 3 orders, they contacted me and said they accidentally sent out the RSX one instead of the Rx8 one in the last 3 orders. What i think i will do is have them to ship you guys the Rx8 one with the return label inside today so you guys will have it quicker. Sorry about that and i don't even know they shipped you guys the wrong one. I will have them replace asap. Thanks for the patient. :)

Just got in from 3 week vacation. The part number on my box that was delivered is BL-ARSX02-LED SM
A-01 I think it was just labeled incorrectly. It fit, the gasket they used is rubber. The stock gasket is different materials, it is foamy.

I will post some pictures later.

Saki - can you send us tracking information if the correct ones have shipped now.
It'd be really nice if we get it tomorrow for this weekend install.

Saki - can you send us tracking information if the correct ones have shipped now.
It'd be really nice if we get it tomorrow for this weekend install.

+1, ya woulda thought they might overnight it or at least 3 day it to fix the problem.

Saki - a little disappointed! There has been no contact since Tuesday, no replacements yet, and no tracking info has been provided. I was hoping for this to go a little smoother.

Last Activity: 01-10-2009 05:05 AM

That is also disappointing.

Still no word......

patience guys....there is probably not much saki can do...its more the company who's making them

I'm sure he will come thru, no reason not to.

Yes, patience is a virtue! But, the frustrating part is lack of communication. I am sure myself and perhaps others would be content with a simple response explaining the delay in shipment of the new batch.

On a different note......can anyone with an 06 give me some pointers on removal of the trunk liner. I have tried every philip-head bit and been unsuccessful. I am inclined to think these aren't threaded, but simple compression clips. But prior attempts to pry them out have left me with nothing but bruised knuckels :banghead: :banghead: :banghead:

hmm... could you get a picture of the clips you're trying to get off? Because I'm only aware of the phillips threaded one and the flattop pry-out clip thingy. Sounds like yours is neither?

Sorry guys, that company have been off for 3 days, but i will sure to get you guy's product shipped out today and tracking will be provide, really sorry, i have been keep contacting them and finally get some answer today. Once again i will ship all of the replacement and new orders out today.

Yes, patience is a virtue! But, the frustrating part is lack of communication. I am sure myself and perhaps others would be content with a simple response explaining the delay in shipment of the new batch.

On a different note......can anyone with an 06 give me some pointers on removal of the trunk liner. I have tried every philip-head bit and been unsuccessful. I am inclined to think these aren't threaded, but simple compression clips. But prior attempts to pry them out have left me with nothing but bruised knuckels :banghead: :banghead: :banghead:

Hold the outer piece of the plastic while you unscrew the middle. Do not push on it too hard or it will pop in again. Trust me they are threaded. Unless some one replaced them or butchered the threads.

Good Luck

Mine arrived broken as well :(

http://www.rx8club.com/attachment.php?attachmentid=131900&stc=1&d=1231873774

it had a little plastic piece ratting around inside it. I think that was the broken part of the tab.

However, I've seen some people say that the used the stock bracket. Are they referring to the clear plastic outside? Maybe I don't need the broken part. The inside is ok I think.

^Yeah they were referring to that, or using the stock gasket with the new light. I think in your case you would want to put the LEDs in the stock housing, although it does look like you should still be able to install that piece no problem.

although it does look like you should still be able to install that piece no problem.

It's kind of a crap picture. You can't see it but that whole tab is split through where the bolt would go. But it seems like everyone is using the stock housing anyway.

The lights arrived yesterday. They were late arriving but definitely worth the wait. I installed using the new housing that came with the lights, but used the OEM foam surround. Installed this morning, and they look and fit great. I really can't tell if they are clear or smoked, but they look good nonetheless.

For those that were waiting to see pics of the tinted tails with these LEDs, SORRY! I tried installing the film myself, had the blow dryer going and everything but couldn't get it to wrap nicely around the contours. I ultimately ended up tearing the film. But, I will be tinting the windows in the near future and will get the tail lamps done at the same time. Will post pictures then!

Saki - thanks. Great product!

I received my replacement today 23 days after payment. I would be happy with the product if it wasn't covered in some sort of adhesive that goo gone won't even remove. I doubt it will even come off so I guess I am forced to spend more time using my factory housing..... I guess you get what you pay for.

http://i133.photobucket.com/albums/q52/kustomizedstang/DSC_0218.jpg

hmm that seems a little bit ridiculus... like somebody got a little to excited when they made that light??

If they wont send you a replacement just try to file a paypal claim i guess...

Hold the outer piece of the plastic while you unscrew the middle. Do not push on it too hard or it will pop in again. Trust me they are threaded. Unless some one replaced them or butchered the threads.

Good Luck

I guess I should've tried more than one before seeking help. The threads were shot on the one I was trying to remove (Murphy's law). The rest were a breeze though. Thanks for the help.

It's kind of a crap picture. You can't see it but that whole tab is split through where the bolt would go. But it seems like everyone is using the stock housing anyway.

It seems like the bolt would still hold up, it doesnt exactly need to be torqued down. In any case you could just use the stock housing, even if you got the tinted one, its not much different than the clear one. Just make sure you use the stock gasket as well.

I ended up just using the gasket that came with the light... after a rainy day I checked and there were no leaks.

Hm... the more stories I read from people having various types of issues, the less likely it seems that this'd be a worthwhile purchase.
Pity :icon_no2:

To be honest, the light really does look sooo much better than that stock red light. This was well worth it in my book

^ +1

^+2.

hmm that seems a little bit ridiculus... like somebody got a little to excited when they made that light??

If they wont send you a replacement just try to file a paypal claim i guess...

Yeah, I decided I need a replacement because there is no way I am going to settle with using my stock housing when I ordered SMOKED for a reason :/

Received mine... can't test it for another few months as car is parked for the winter, but at least it's in my hands.

I haven't received any word yet.

huh... did you end up filing a claim?

It seemed as though this thread started out nicely but is turning into a fail. I want this 3rd brake light but not if I get stiffed like the last couple of guys...

that's what it seems like... My light was on my doorstep 5 days after I paid for it, but WV has been waiting for ever...

Yeah I'll steer clear in that case...

Was it ever established what sort of surge protection is built into this circuit? It seems like a very cool addition; but, I'd hate to install it, only to have it fail in 4 to 6 months.

Ill file a claim tomorrow if nothing is done. I just want a freaking smoked brake light

Yeah I feel for ya, it really does look great though. (sorry to rub it in)

Ill file a claim tomorrow if nothing is done. I just want a freaking smoked brake light

I feel for you dude...your patience is really being tested. I am sure you have already tried but in case you haven't, after applying goo gone let it sit for about a minute, and then try rubbing it off with a wet chamois. Good luck!

The lights do look good though

It isnt coming off, ive tried 2 different kinds of adhesive remover and I am at my limits.

Dispute Opened. I either want a refund, or a functional, correct looking item.

Well paypal apparently isn't any help and the dispute ended with a sorry, we only guarentee shipment of the product..... I thought they helped with different than described and faulty goods as well. I guess I can just swap houses and smoke them myself. In the meantime I guess I will sell the rsx ones to recoup my loss.

this is ridiculous...I had no problems getting mine and looks great....what happened to saki? c'mon dude, step up here and resolve the issues in your GB.

Well paypal apparently isn't any help and the dispute ended with a sorry, we only guarentee shipment of the product..... I thought they helped with different than described and faulty goods as well. I guess I can just swap houses and smoke them myself. In the meantime I guess I will sell the rsx ones to recoup my loss.

Sounds like paypal is giving you a runaround. I've had issues with products paid with paypal in the past, and was always able to get a refund. You might wanna push a little harder!

Saki - you gotta make this right! WV's issues have been going on for about 2 months, 1st a wrong light and now this. I am still waiting for a return label for the rsx light also, it wasn't included with the 2nd shipment like you had mentioned.

Sounds like paypal is giving you a runaround. I've had issues with products paid with paypal in the past, and was always able to get a refund. You might wanna push a little harder!

Saki - you gotta make this right! WV's issues have been going on for about 2 months, 1st a wrong light and now this. I am still waiting for a return label for the rsx light also, it wasn't included with the 2nd shipment like you had mentioned.
I say sell it if you got the right one now. Screw them. Serves them right.

the one i have no has crap all over it :/

the one i have no has crap all over it :/
yeah, I saw...just use the oem lense and tint it yourself...it would be incredibly easy.

and better quality also! I'm not expecting a response from saki, hes seen this thread multiple times since the problems have started. I guess I will paint it on the next sunny day.

Maybe get an admin involved since they approved this GB. This should be addressed.

I say sell it if you got the right one now. Screw them. Serves them right.

Ya another week and I am selling it. A month should be more than plenty of time (even for a procrastinator) to send a return label.

8rocks, what you're going through really sucks. I don't understand why they aren't being responsive. I'm one of the ones that got the wrong light (think it was the RSX one) and I got a return label in a day and got the correct brake light a few days after that.

Thought I'd post some pictures of it installed since I haven't seen any '09 pics yet. I've always thought the '09 looked weird with OEM LED side lights and a bulb 3rd brake light. Even with the light off it didn't match since the new panels are mostly reflective silver which didn't seem to go well with the reddish 3rd brake light. I think this new light looks much better both with the light on and off but you be the judge.

http://i469.photobucket.com/albums/rr59/egadsfly/rx-8%20brake%20lights/brakeoffbefore.jpg
This is the original, light off.
http://i469.photobucket.com/albums/rr59/egadsfly/rx-8%20brake%20lights/brakeoffafter.jpg
This is the LED, light off.

http://i469.photobucket.com/albums/rr59/egadsfly/rx-8%20brake%20lights/brakeonbefore.jpg
This is the original, light on.
http://i469.photobucket.com/albums/rr59/egadsfly/rx-8%20brake%20lights/brakeonafter.jpg
This is the LED, light on.

I used different cameras for the before and after so the color is a bit different but you get the gist.

looks way better man

8rocks, what you're going through really sucks. I don't understand why they aren't being responsive. I'm one of the ones that got the wrong light (think it was the RSX one) and I got a return label in a day and got the correct brake light a few days after that.

Thought I'd post some pictures of it installed since I haven't seen any '09 pics yet. I've always thought the '09 looked weird with OEM LED side lights and a bulb 3rd brake light. Even with the light off it didn't match since the new panels are mostly reflective silver which didn't seem to go well with the reddish 3rd brake light. I think this new light looks much better both with the light on and off but you be the judge.
I used different cameras for the before and after so the color is a bit different but you get the gist.

It's actually WVBOOSTED that is still having problems. I got my replacements, just not the return label for the RSX lights they had shipped out originally.

Your car definitely looks WAY better with the LEDs. Congrats.

I just realized you are in Livermore....you come to the meets? Fortunate Few had mentioned there is one coming up in Tracy..... should try and make it.

It's actually WVBOOSTED that is still having problems. I got my replacements, just not the return label for the RSX lights they had shipped out originally.

Your car definitely looks WAY better with the LEDs. Congrats.

I just realized you are in Livermore....you come to the meets? Fortunate Few had mentioned there is one coming up in Tracy..... should try and make it.

I actually met Fortunate Few at one of the Mazda meets in Dublin and I'll be going to the USCM in April. But I didn't hear about one in Tracy. When's that?

I actually met Fortunate Few at one of the Mazda meets in Dublin and I'll be going to the USCM in April. But I didn't hear about one in Tracy. When's that?

2/21 I believe....will confirm with FF

egads that looks SOO much better than the stock...

WB....were you able to work something out, or are you still waiting?

He's been on the boards.. surprised he hasn't said something in here:

Last Activity: 02-08-2009 12:12 AM

I haven't heard anything at all. I wouldn't trust to send him another penny of my money.

Can we shut down this Group buy and make sure this guy never gets any "group rip offs" started again. I'm going straight to the company tomorrow and tell them what kind of message saki is giving people about their products.

If any of you guys consider buying anything else from him, I'd take this customer service into consideration, and better believe I will speak up every thread I see. Thanks!

I'm sorry you're having such a ridiculous time getting your light. Let us know what happens at the company tomorrow

I'm really sorry to hear that you're having such a crap time getting your light WV. Keep us posted on what happens. I don't understand why saki would start this strong and then just fizzle out. Shady.

On a lighter note. I was a little disappointed that the chrome around the LEDs didn't really match the chrome in the taillight housings, which I really wanted for that factory look. The chrome quite a bit brighter. The smoked lense makes it too dark though. Then I came across this thread:

http://www.rx8club.com/showthread.php?t=165896

I bought some Rit dye and did some experimenting. I ended up getting the aftermarket housing that came with the kit the perfect color, and as a bonus, after soaking the stock housing the gasket came off easily so I could use it with the aftermarket one. Anyway, it's a very subtle change. Let me know what you think.

Before, chrome is much brighter than the tails:
http://i234.photobucket.com/albums/ee35/Aipex8/Aero%20Flare/DSCF1152.jpg

After, looks like a match:
http://i234.photobucket.com/albums/ee35/Aipex8/DSCF1252.jpg

What about ordering on Ebay?

eBay is more expensive, but might be safer...

eBay is more expensive, but might be safer...

I never thought I'd hear those words lol...

Id watch out for anything sold by Racer-union.com, or spyderauto.com. Both companies are the same and giving me the run around when I call. I wouldn't be as pissed if I had paid this saki guy but I my payment went to john at spyderauto.com. They will recieve enough phone calls to make this right and I hope saki is laughed off this forum for his "wonderful customer service."

I finally got ahold of Ray at Spyderauto after going through a LOUSY (microsoft style) operator. He said he should be able to send out a new brakelight in the next couple days. It sucks you have to bypass the operator of the group buy to get the slightest amount of customer service. I will inform you if this one isn't a complete piece of junk.

8rocks, what you're going through really sucks. I don't understand why they aren't being responsive. I'm one of the ones that got the wrong light (think it was the RSX one) and I got a return label in a day and got the correct brake light a few days after that.

Thought I'd post some pictures of it installed since I haven't seen any '09 pics yet. I've always thought the '09 looked weird with OEM LED side lights and a bulb 3rd brake light. Even with the light off it didn't match since the new panels are mostly reflective silver which didn't seem to go well with the reddish 3rd brake light. I think this new light looks much better both with the light on and off but you be the judge.

http://i469.photobucket.com/albums/rr59/egadsfly/rx-8%20brake%20lights/brakeoffbefore.jpg
This is the original, light off.
http://i469.photobucket.com/albums/rr59/egadsfly/rx-8%20brake%20lights/brakeoffafter.jpg
This is the LED, light off.

http://i469.photobucket.com/albums/rr59/egadsfly/rx-8%20brake%20lights/brakeonbefore.jpg
This is the original, light on.
http://i469.photobucket.com/albums/rr59/egadsfly/rx-8%20brake%20lights/brakeonafter.jpg
This is the LED, light on.

I used different cameras for the before and after so the color is a bit different but you get the gist.

OMG its fabulous

I finally got mine installed (months later) and here are the results, sorry for the iphone crappy pictures. I used the factory weatherstripping or whatnot because the one included wasnt working out so well.

http://i133.photobucket.com/albums/q52/kustomizedstang/IMG_0236.jpg
http://i133.photobucket.com/albums/q52/kustomizedstang/IMG_0234.jpg
http://i133.photobucket.com/albums/q52/kustomizedstang/IMG_0239.jpg

Looks good. Glad you finally got it taken care of. Now, wash your poor car! :)

I only drive it like twice a month and it sets in the carport the rest of the time. :/ its been too cold to do anything.

I only drive it like twice a month and it sets in the carport the rest of the time. :/ its been too cold to do anything.

They invented this crazy new thing called a car cover... ;)

Glad they finally got you your light, what a PITA

how did u get 09 rx8 tail lights on a pre-09 car?

how did u get 09 rx8 tail lights on a pre-09 car?

That is not a pre 09. That's a 2009..

So whats the deal? Are they still selling this or not?

on eBay