View Full Version : seafoam video
tunerwannab 09-01-2008, 09:15 PM Well I did the carbon cleaning on my 8 today and here is the video of it.
http://www.youtube.com/watch?v=yekIvV2VJTo
Sorry my camera battery died :banghead: but I let the car just idle for like 7min after this and it continued to smoke. I noticed a HUGE difference right away in how the car runs. :)
G3tR3DDY2GR3DDY 09-01-2008, 09:18 PM how did you do it? through the nips, gas tank, or spark plugs?
tunerwannab 09-01-2008, 09:23 PM how did you do it? through the nips, gas tank, or spark plugs?
Great point. The nipples. I let it soak for about 80min.
WoodsOfGreenRx8 09-01-2008, 09:38 PM ^ How exactly did you do it ?
WVBoosted8 09-01-2008, 09:49 PM Yeah, I wanna do that to mine. Someone told me you couldn't use seafoam on a turbocharged car.... is that true?
mysql 09-01-2008, 10:14 PM Yeah, I wanna do that to mine. Someone told me you couldn't use seafoam on a turbocharged car.... is that true?
That's totally true! Which is why I didn't make a seafoam video of my turbo rx-8 and post it on youtube. But, if I did, it would look a lot like this:
http://www.youtube.com/watch?v=WyPhi32j8Kg
tunerwannab 09-01-2008, 10:21 PM ^ How exactly did you do it ?
http://www.rx8club.com/showthread.php?t=142852
Very good DIY. only difference is I work at jiffy lube pulled the car in the bay and went underneath my car to unhook the eccentric shaft position sensor.:) If you can crawl under the front of your 8 you can reach it that way too.
tunerwannab 09-01-2008, 10:22 PM Yeah, I wanna do that to mine. Someone told me you couldn't use seafoam on a turbocharged car.... is that true?
mysql did his and posted a video on youtube of it. His name is tyrannical on you tube.
tunerwannab 09-01-2008, 10:24 PM That's totally true! Which is why I didn't make a seafoam video of my turbo rx-8 and post it on youtube. But, if I did, it would look a lot like this:
http://www.youtube.com/watch?v=WyPhi32j8Kg
too slow. :banghead:
mysql did you actually use seafoam or the mazda stuff? Did you also do it through the nipples? How much difference did you notice?
mysql 09-01-2008, 10:28 PM seafoam. I took out the spark plugs and poured it right in. Then turned the engine over, and repeated. Once I was sure it was all over, I let it sit for a few hours.
No noticeable change in the car. But when my engine was pulled out and disassembled, you can see it was in great shape to begin with. It's all about diminishing returns.
NgoRX8 09-01-2008, 11:44 PM that reminds me... i wanna do this.
pdxhak 09-01-2008, 11:56 PM Nice job. I want to do this but not at my house! How much does it smell and how long does the car smoke?
tunerwannab 09-02-2008, 12:15 AM Nice job. I want to do this but not at my house! How much does it smell and how long does the car smoke?
After about 90sec I just let the car idle and it continued to smoke for 5min till warm. while idleing the car smoke a good amount. Once warm i revved to 6k about 20 or 25 times like in the instructions. After that it pretty much stopped. blah blah blah ramble ramble.
Long story short about 8-11min. The shucks about a few hundred yards away from my work called and asked if we set our dumpster on fire. :lol2: :lol:
EDIT: the smell wasn't too bad but I am used to doing fuel injection cleanings at my work. I would just close all you windows in your house and should be no problem. Inside my car didn't smell either.
WVBoosted8 09-02-2008, 12:19 AM That's totally true! Which is why I didn't make a seafoam video of my turbo rx-8 and post it on youtube. But, if I did, it would look a lot like this:
http://www.youtube.com/watch?v=WyPhi32j8Kg
har har lol I've never used the stuff and have just heard stuff from the grapevine :/
shadycrew31 09-02-2008, 03:04 AM the directions say to rev the engine to 1.5 rpms and hold it there until the majority of the smoke dissipates then rev to 6k 20 times. yea so I wouldn't let it naturally idle.
P.S. you don't actually need a second person there if you use the seafoam method.
DOMINION 09-02-2008, 03:36 AM Yeah the second person is needed if you use the can and crank your car. Thats what I'm doing this weekend. Well when my cans show up :)
lilring 09-02-2008, 04:44 PM subscribed
tunerwannab 09-02-2008, 10:12 PM the directions say to rev the engine to 1.5 rpms and hold it there until the majority of the smoke dissipates then rev to 6k 20 times. yea so I wouldn't let it naturally idle.
P.S. you don't actually need a second person there if you use the seafoam method.
Mine kept wanting to die for about the first 30 sec so I had to rev it. after that I just let it idle. And you should wait till It warms up before you do the 6.5k revs.
TopGear8 09-02-2008, 10:14 PM well i did mine today, let soak for hour and half, i have 50k miles and hardly nothing.... is it the time or i just dont have a lot of carbon? would it hurt to do it again tomorrow when i can wait longer?
tunerwannab 09-02-2008, 10:58 PM well i did mine today, let soak for hour and half, i have 50k miles and hardly nothing.... is it the time or i just dont have a lot of carbon? would it hurt to do it again tomorrow when i can wait longer?
Strange? What way did you do it? How much cleaner did you use?
imput1234 09-02-2008, 11:06 PM dats a lot of smoke
TopGear8 09-02-2008, 11:09 PM i poured like a fourth of an alluminum soda can in each port. Through the vaccum nipples. couldnt really measure and couldnt wait any longer.... so would it hurt to do it again with measuring 2 oz each and waiting over 2 hours?
rglbegl 09-02-2008, 11:27 PM So under "related Videos" I found Kane.
http://www.youtube.com/watch?v=Afp8s8SQfDA&feature=related
tunerwannab 09-02-2008, 11:45 PM i poured like a fourth of an alluminum soda can in each port. Through the vaccum nipples. couldnt really measure and couldnt wait any longer.... so would it hurt to do it again with measuring 2 oz each and waiting over 2 hours?
I didn't measure either. I just filled a cup and cranked it for 13 sec (the DIY said 10-15sec) and let it suck.:uhh: I dont think it would hurt it but don't quote me.
TopGear8 09-03-2008, 09:07 PM ok so i did it again today, just left the hose in the whole bottle and cranked for 13 seconds two times each rotor. Worked great, smoked for about 25 minutes... crazy. I actually did two rx8's at one time lol. It was insane...
G3tR3DDY2GR3DDY 09-03-2008, 09:30 PM just did mine- it was nighttime and just had cellphone video but here is right at first... it was A LOT of smoke :P
http://i147.photobucket.com/albums/r316/sublime6896/My%20RX8/th_VIDEO_014.jpg (http://s147.photobucket.com/albums/r316/sublime6896/My%20RX8/?action=view¤t=VIDEO_014.flv)
mysql 09-03-2008, 09:31 PM hope you guys are letting it soak for a while and not just burning it off right away
G3tR3DDY2GR3DDY 09-03-2008, 09:48 PM that was hour and 45 minutes. :)
NgoRX8 09-03-2008, 10:58 PM how long should it be soaked for?
tunerwannab 09-21-2008, 11:31 PM how long should it be soaked for?
I did about 2 hours I think.
tunerwannab 09-21-2008, 11:31 PM hope you guys are letting it soak for a while and not just burning it off right away
Sure did.
|