Spinning Sushi
05-12-2008, 05:50 PM
So, basically, I have the Autobahn body kit and my car is LITERALLY three inches off the ground. Due to this, I bottomed out my front bumper which did not crack the body kit but left a pretty nasty paint scrape. I touch the paint scrape and it starts flaking off. How do I prevent it from flaking? I'm planning on getting a gray vinyl and covering it up, will this prevent the paint in that area from cracking? Is the paint on my bumper doomed?
http://i36.photobucket.com/albums/e37/xDarkGenesisx/My%20Car/Photo-0029.jpg
Spinning Sushi
05-12-2008, 05:50 PM
And please, no "taj-like" responses.
Jedi54
05-12-2008, 06:07 PM
zomg, ownage!1!1!
(that 'taj' enough for ya?)
Jedi54
05-12-2008, 06:08 PM
Alright, enough of that...
Your paint isn't doomed but I'm surprised it cracked so easily. Is the bumper cracking or is the paint just peeling off?
Spinning Sushi
05-12-2008, 06:14 PM
No, the kit is not cracked. The paint is only 3 weeks old and I bottomed out pretty hard. Upon closer inspection, after bottoming out, it also created a spider-web like paint cracks. This is the Shine replica of the the Autobahn so it's pretty flexible, I guess that's why it didn't crack the kit. The paint probably cracked from the flex of the kit...
Spinning Sushi
05-12-2008, 06:21 PM
Also, the spider web cracking can not be captured by my crappy cell phone camera...
05rex8
05-12-2008, 07:02 PM
just have it spot blended...i do this all the time for ppl at work. you don't have to repaint the whole bumper. if it were my 8, I wouldn't use a temporary fix like you mentioned...I mean c'mon...it's an 8...we are superior for driving them, gotta keep em looking good! :)
Razz1
05-13-2008, 12:22 AM
That's the clear coat thats comming off.
Spinning Sushi
05-13-2008, 02:57 PM
Hmmm... how do I prevent this from coming off? Any products out there that will retard the chipping of the paint?
RotorWheeee
05-13-2008, 09:08 PM
AdPro as an adhesion promoter, and add a flex modifier to the paint.
The AdPro is a primer coat which etches/bites into the base surface so the paint can bond to it. The Flex modifier will allow the paint to "flex" rather then crack. Both should be available from your paint suplier/ or a body shop.
Hmmm... how do I prevent this from coming off? Any products out there that will retard the chipping of the paint?