vIce^gRip
09-28-2007, 01:05 AM
Pettit Racing's RX-8 Rotor Shaped Radio Knob
The Product:
The Radio Knob is a direct snap-on replacement. It requires no tools and takes less than 5 minutes from start to finish. The back-light holes shown in the night images are being light from the radio units lighting and therefore; NO WIRING is required.
Dress up your dash with a distinct rotor shaped radio knob.
CNC machined aluminum with translucent tip inserts, hand polished and finished with a classy carbon inlaid looking RX-8 emblem. The perfect compliment to your 8’s dash, as well as its rotary engine.
Both RX-8 & Pettit emblems included with every knob.
The rotor represents one of the three moving parts in your engine, two rotors, one shaft, and a great conversation piece.
FAQ:
Q: What tools and experience are required?
A: No tools or mechanical experience are required, the factory knob pulls right off and the Pettit knob slides right on the radio control shaft.
Q: What makes the knob illuminate?
A: Translucent tip insert brightness is controlled with the instrument lamp dimmer. The knob is backlight by the factory radio lights.
Price: $30.00
Visit www.PettitRacing.com (http://pettitracing.com/rx8/index.htm) now to order yours!
***********************************
The knobs have a carbon fiber-like sticker emblem "RX-8" in clear urethane.
http://pettitracing.com/rx8/images/en/interior_1950-2000.jpg
http://i7.photobucket.com/albums/y259/glassetcher/RX-8%20Pix/Radio%20Knob/RadioKnob1.jpg
http://i7.photobucket.com/albums/y259/glassetcher/RX-8%20Pix/Radio%20Knob/RadioKnob2.jpg
http://i7.photobucket.com/albums/y259/glassetcher/RX-8%20Pix/Radio%20Knob/RadioKnob3.jpg
Special Thanks to glassetcher for these images.
Please Note: The knobs now ship with the new CF-like sticker as seen in the Knob Only image. The images of the knob on the radio are the old CF-like sticker insert.
***********************************
The Product:
The Radio Knob is a direct snap-on replacement. It requires no tools and takes less than 5 minutes from start to finish. The back-light holes shown in the night images are being light from the radio units lighting and therefore; NO WIRING is required.
Dress up your dash with a distinct rotor shaped radio knob.
CNC machined aluminum with translucent tip inserts, hand polished and finished with a classy carbon inlaid looking RX-8 emblem. The perfect compliment to your 8’s dash, as well as its rotary engine.
Both RX-8 & Pettit emblems included with every knob.
The rotor represents one of the three moving parts in your engine, two rotors, one shaft, and a great conversation piece.
FAQ:
Q: What tools and experience are required?
A: No tools or mechanical experience are required, the factory knob pulls right off and the Pettit knob slides right on the radio control shaft.
Q: What makes the knob illuminate?
A: Translucent tip insert brightness is controlled with the instrument lamp dimmer. The knob is backlight by the factory radio lights.
Price: $30.00
Visit www.PettitRacing.com (http://pettitracing.com/rx8/index.htm) now to order yours!
***********************************
The knobs have a carbon fiber-like sticker emblem "RX-8" in clear urethane.
http://pettitracing.com/rx8/images/en/interior_1950-2000.jpg
http://i7.photobucket.com/albums/y259/glassetcher/RX-8%20Pix/Radio%20Knob/RadioKnob1.jpg
http://i7.photobucket.com/albums/y259/glassetcher/RX-8%20Pix/Radio%20Knob/RadioKnob2.jpg
http://i7.photobucket.com/albums/y259/glassetcher/RX-8%20Pix/Radio%20Knob/RadioKnob3.jpg
Special Thanks to glassetcher for these images.
Please Note: The knobs now ship with the new CF-like sticker as seen in the Knob Only image. The images of the knob on the radio are the old CF-like sticker insert.
***********************************