I am in need of the diagram which translates the below image to the actual pins on the ECU. If anyone has it I would be greatly appreciative!

http://www.rx8club.com/attachment.php?attachmentid=16518&stc=1

That page is from the wiring diagram - the first twenty pages have all the ECU pinouts, what is the problem?

S

The problem is that I do not have the first 20 pages :)

Thats from the service manual:
http://www.rx8club.com/attachment.php?attachmentid=101425&stc=1&d=1181065576

http://www.rx8club.com/attachment.php?attachmentid=101424&stc=1&d=1181065470

Hope it helps.

You rock, thanks so much!

I love people who can't/don't search. They warm my heart.

Isn't it a little irrelevant to comment about it after the thread is basically over? I actually spent at least 30 minutes searching which is how I found the original diagram I posted.

Thanks to those who helped!

Isn't it a little irrelevant to comment about it after the thread is basically over?

Nah, not really. Especially in light of the info that is still missing from those diagrams as posted.

All I needed was the pin locations for 5D 5O 5R and 5T (grounds) to get the tach working again after directly connecting the crank trigger to 2U and 2X.

That'll be interesting since the ESS is so finicky.
Have you checked the float between the new way you have it wired and the existing wiring?